Research Publications

1. Santosh Vilas Patil, Kshitij Bhargava and Indrajit Dattatray Pharne “Performance and reproducibility analysis of zinc sulfo-selenide and cuprous oxide based perovskite solar cell: A SCAPS study”, Physica Scripta Research Papers, IOP Science, ISSN NO. 1402-4896, Department - ECE

2. Jamil M., He N., Wei Z., Mushtaq R.T., Khan A.M., Hegab H., Gupta M.K., Khanna N. “A state-of-the-art review on sustainability evaluation of machining processes involving the effects of advanced cooling technologies”, International Journal of Advanced Manufacturing Technology Research Papers, Springer, ISSN NO. 2683-768, Department - ME

3. Nikita Joshi, and Axaykumar Mehta “Distributed Discrete-time Exponential Sliding Mode Consensus Protocol for Discrete Multi-Agent System Comprise of Multiple Robotic Arms”, ISA Transactions Research Papers, Elsevier, ISSN NO. 1879-2022, Department - ECE

4. Reddy, A.S., Iyer, K.K.R. & Dave, T.N. “Alkali Activated Soil Stabilization as a Sustainable Pathway for the Development of Resilient Geotechnical Infrastructure”, Indian Geotechnical Journal  Research Papers, Springer, ISSN NO. 2277-3347, Department - CE

5. Patel T.; Chauhan P. “Battery Storage Assisted Plug-and-Play of Wind Generator in Standalone Microgrid for Off-Grid Residential Consumers”, IEEE Transactions on Consumer Electronics Research Papers, IEEE, ISSN NO. 1558-4127, Department - ECE

6. Choudhuri M.; Makadiya P.J. “On values of isotropic quadratic forms”, Boletin de la Sociedad Matematica Mexicana Research Papers, Springer, ISSN NO. 2296-4495, Department - BS

7. Muchhadiya A.; Abhishek K.; Kumari S.; Saxena K.K.; Bandhu D.; Vora J.; Reddy V.P.; Navajyoth B. “Optimization of friction stir welding process parameters for HDPE sheets using satisfaction function approach”, Indian Journal of Engineering and Materials Sciences Research Papers, CSIR, ISSN NO. 0971-4588, Department - ME

8. K Kumar, P Kumar, RK Patel, M Sharma, V Bajaj “Time frequency distribution and deep neural network for automated identification of insomnia using single channel EEG-signals”, IEEE Latin America Transactions Research Papers, IEEE, ISSN NO. 1548-0992, Department - ECE

9. P Trivedi, J Shah, R Čep, L Abualigah, K Kalita “A Hybrid Best-Worst Method (BWM)–Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) Approach for Prioritizing Road Safety Improvements”, IEEE Access Research Papers, IEEE, ISSN NO. 2169-3536, Department - CE

10. Singh R.; Pathak V.K.; Kumar R.; Dikshit M.; Aherwar A.; Singh V.; Singh T. “A historical review and analysis on MOORA and its fuzzy extensions for different applications”, Heliyon Research Papers, Elsevier, ISSN NO. 2405-8440, Department - ME

11. Bandhu D.; Mohan M.M.; Nittala N.A.P.; Jadhav P.; Bhadauria A.; Saxena K.K. “Theories of motivation: A comprehensive analysis of human behavior drivers”, Acta Psychologica Research Papers, Elsevier (PubMed), ISSN NO. 1873-6297, Department - HSS

12. Sharma N.; Sharma M.; Tailor J.; Chaudhari A.; Joshi D.; Acharya U.R. “Automated detection of depression using wavelet scattering networks”, Medical Engineering and Physics Research Papers, Elsevier, ISSN NO. 1873-4030, Department - ECE

13. Ramkumar P.L.; Gupta N. “A systematic approach for the selection of additives for rotational molding process”, Sadhana - Academy Proceedings in Engineering Sciences Research Papers, Springer, ISSN NO. 0973-7677, Department - ME

14. Patel K.U.; Kanzariya D.B.; Chaudhary M.Y.; Jana A.; Pati R.K.; Das S.; Pal T.K. “Fluorescent MOF and Its Gel Composite for the Fluorescence Recovery “Turn-On” Detection of Al3+ Ions and “Turn-Off” Detection of Oxo-Anions”, Inorganic Chemistry Research Papers, ACS, ISSN NO. 0020-1669, Department - BS

15. Kaushik V.; Kumari N.; Bhojani A.K.; Singh D.K.; Pathak S. “Rheological and shear thickening properties in MoS2 nanosheets dispersion: An integrated experimental and theoretical investigation”, Physica B: Condensed Matter Research Papers, Elsevier, ISSN NO. 0921-4526, Department - BS

16. Duman E.; Yapan Y.F.; Salvi H.; Sofuoğlu M.A.; Khanna N.; Uysal A. “Investigation of ultrasonic vibration assisted orthogonal turning under dry and minimum quantity lubrication conditions and performing sustainability analyses”, Journal of Cleaner Production Research Papers, Elsevier, ISSN NO. 0959-6526, Department - ME

17. R Kumar, V Singh, A Bansal, AK Singla, J Singla, and N. Khanna “Experimental research on the physical and mechanical properties of rice straw-rice straw ash composite materials”, International Journal on Interactive Design and Manufacturing Research Papers, Springer, ISSN NO. 1955-2505, Department - ME

18. V Sodha, M Bandyopadhyay, R Gaur, R Bandyopadhyay and S Shahabuddin “Synthesis and application of ZSM-5/Graphene composite for photocatalytic degradation of industrial dyes”, Advances in Natural Sciences: Nanoscience and Nanotechnology Research Papers, Springer, ISSN NO. 2043-6262, Department - BS

19. E M Manohar, S Roy, S Bandyopadhyay, M Pal, S Singh, V Ganesan, R Pełka, P Konieczny, M Rams, H Choi, S Tothadi and Das “A Linear Trinuclear Acetate Bridged Cobalt Complex Containing Pyridine-Based Bicompartmental Ligand: Synthesis, Structural, Magnetic, and Electrocatalytic Oxygen Evolution Studies”, Crystal Growth & Design Research Papers, ACS Pub., ISSN NO. 1528-7483, Department - BS

20. Priyank Trivedi, Jiten Shah, Domokos Esztergár‑Kiss, Szabolcs Duleba “Phase‑wise injury integrated severity modeling of road accidents: a two‑stage hybrid multi‑criteria decision‑making model”, Evolving Systems Research Papers, Springer, ISSN NO. 1868-6486, Department - CE

21. RM Raghavendra, A Subramaniam, G Iyer “Free-surface proximity induced bistability and semi-semicoherency in precipitation systems”, Physica Scripta Research Papers, IOP, ISSN NO. 0031-8949, Department - ME

22. A. Sandeep Reddy, Ram Wanare, Veerabhadra M. Rotte, Kannan K.R. Iyer, Trudeep N. Dave “Performance of fibre-reinforced landfill mined soil like fraction as an environment friendly fill material”, Journal of Environmental Management Research Papers, Elsevier, ISSN NO. 1095-8630, Department - CE

23. Zhou Y.-M.; Wu J.-P.; Huang W.; Choubey G. “Study on combustion characteristics of sinusoidal hydrogen pulsed jet with different frequencies in supersonic flows”, Acta Astronautica Research Papers, Elsevier, ISSN NO. 0094-5765, Department - ME

24. P Sathavara, AK Parwani, P Chaudhuri “Simultaneous estimation of heat source strength of hot wire and thermal conductivity of material”, Numerical Heat Transfer, Part A: Applications Research Papers, T&F, ISSN NO. 1521-0634, Department - ME

25. C Sentouh, M Fouka, JJ Rath, JC Popieul “Adaptive Observer-Based Output Feedback FTC for Nonlinear Interconnected Vehicle Dynamics with Unknown Actuator Faults”, IEEE Transactions on Intelligent Vehicles Research Papers, IEEE, ISSN NO. 2379-8904, Department - ME

26. Manohar E.M., Guizouarn T., Ahmed N., Herchel R., Pointillart F., Das S., Dey A. “Ligand-field effect to harness the magnetic anisotropy in a series of mixed valence Co (III)–Co (II) dinuclear complexes”, Applied Organometallic Chemistry Research Papers, Wiley, ISSN NO. 0268-2605, Department - BS

27. Kundaliya P.J. “a-Robust Error Analysis of L2-1r Scheme on Graded Mesh for Time-Fractional Nonlocal Diffusion Equation”, Journal of Computational and Nonlinear Dynamics Research Papers, ASME, ISSN NO. 1555-1415, Department - BS

28. Singh P., Sharma S., Kumar K., Iyer G., Kumar A. “A Comparative Study on Mechanical Properties of Yttrium Oxide and Reduced Graphene Oxide Reinforced Epoxy Nanocomposites”, Journal of Materials Engineering and Performance Research Papers, Springer, ISSN NO. 1059-9495, Department - ME

29. Sharma N.; Sharma M.; Telangore H.; Acharya U.R. “Automated accurate insomnia detection system using wavelet scattering method using ECG signals”, Applied Intelligence Research Papers, Springer, ISSN NO. 1573-7497, Department - ECE

30. Ingle M.; Sharma M.; Kumar K.; Kumar P.; Bhurane A.; Elphick H.; Joshi D.; Acharya U.R. “A systematic review on automatic identification of insomnia”, Physiological Measurement Research Papers, IOP Science, ISSN NO. 0967-3334, Department - ECE

31. Anand G.; Vyas M.; Yadav R.N.; Nayak S.K. “On Reducing Data Transmissions in Fog-Enabled LoRa-Based Smart Agriculture”, IEEE Internet of Things Journal Research Papers, IEEE, ISSN NO. 2327-4662, Department - ECE

32. M. Faniband and P. Jadhav “Indian stock market sensitivity to macroeconomic and non-macroeconomic factors: an industry-level analysis”, International Journal of Monetary Economics and Finance Research Papers, Inder Science, ISSN NO. 1752-0487, Department - HSS

33. Shukla, R. , Khare, D. , Rudra, R. , Tiwari, P. , Sharma, H. , Daggupati, P. and Goel, P. “Evaluation of Rainfall Tendency for the Twentieth Century over Indira Sagar Region in Central India”, American Journal of Climate Change Research Papers, Scientific Research, ISSN NO. 2167-9509, Department - CE

34. S Shah, AK Parwani “Temperature Profile Estimation Downstream to T-Junction for Thermal Mixing of Fluids”, Heat Transfer Engineering Research Papers, T&F, ISSN NO. 1521-0537, Department - ME

35. T Rijwani, P Ramkumar “Thermal Debinding for Binder Burnout in Metal and Ceramic Processing”, Heat Transfer Engineering Research Papers, T&F, ISSN NO. 1521-0537, Department - ME

36. K Abhishek, V Prajapati, S Kumari, BK Potnuru “Application of metal cored filler wire for environmental-friendly welding of low alloy steel: experimental investigation and parametric optimization”, International Journal on Interactive Design and Manufacturing (IJIDeM) Research Papers, Springer, ISSN NO. 1955-2505, Department - ME

37. M Patil, PH Dalal, AS Reddy, KKR Iyer, TN Dave “Evaluation of the geotechnical characteristics of landfill mined soil like fraction (LMSF) for sustainable fill application.”, Multiscale and Multidisciplinary Modeling, Experiments and Design Research Papers, Springer, ISSN NO. 2520-8179, Department - CE

38. A. S. Reddy, M. Patil, P.H. Dalal, K.K.R. Iyer, T.N. Dave “Sustainable utilization of landfill mined soil like fraction in subbase layer for asphalt road applications”, Cleaner Materials Research Papers, Elsevier, ISSN NO. 2772-3976, Department - CE

39. Redekar, A., Deb, D. “Selection guidance of electrical actuation with different gearheads for power-off load latching”, Electrical Engineering  Research Papers, Springer, ISSN NO. 1432-0487, Department - ECE

40. A Redekar, HS Dhiman, D Deb, SM Muyeen “On reliability enhancement of solar PV arrays using hybrid SVR for soiling forecasting based on WT and EMD decomposition methods”, Ain Shams Engineering Journal Research Papers, Elsevier, ISSN NO. 2090-4495, Department - ECE

41. S Sata, M Suthar, M Mungule, KM Vyas “Development of Colloidal Nanosilver as a High-Workability Nanoadditive for Cement Composites: A Mechanistic Approach”, ACS Sustainable Chemistry & Engineering Research Papers, ACS, ISSN NO. 2168-0485, Department - CE

42. AK Bhojani, HL Kagdada, DK Singh “Ultrahigh power factor and excellent solar efficiency in two-dimensional hexagonal group-IV–V nanomaterials”, Journal of Applied Physics Research Papers, AIP, ISSN NO. 0021-8979, Department - BS

43. E Manohar, H. N. Dhandapani, S. Roy, R. Pełka, M. Rams, P. Konieczny, S. Tothadi, S. Kundu, A. Dey, and S. Das “Tetranuclear CoII4O4 Cubane Complex: Effective Catalyst Toward Electrochemical Water Oxidation”, Inorganic Chemistry Research Papers, ACS, ISSN NO. 0020-1669, Department - BS

44. MA Makhesana, H Vesuwala, KM Patel, A Vafadar & N.Khanna et al. “Assessing the cooling/lubricating agencies for sustainable alternatives during machining of Nimonic 80: Economic and environmental impacts”, Heliyon Research Papers, Elsevier, ISSN NO. 2405-8440, Department - ME

45. G Chaubey, BST Veerendra, R Trivedi, A Ingenito “Role of dual cavity on the combustion performance of a splitter plate-assisted supersonic combustor”, Journal of Fluid Mechanics Research Research Papers, BEGELL HOUSE, ISSN NO. 2152-5110, Department - ME

46. T Patel, P Chauhan “Pre-synchronization of Weak Source in Microgrid”, IEEE Transactions on Power Electronics  Research Papers, IEEE, ISSN NO. 1941-0107, Department - ECE

47. H. Kumar, N. Joshi, Himanshu Sharma, D. Gupta & S. Suryavanshi “Time–frequency characterization of seasonal temperature in India and teleconnection of temperature with atmospheric oscillation indices”, Stochastic Environmental Research and Risk Assessment  Research Papers, Springer, ISSN NO. 1436-3259, Department - CE

48. M. Faniband and P. Jadhav “Reactions of Large, Mid, and Small Stocks to Macroeconomic and Non-Macroeconomic Factors : Similar or Different?”, Indian Journal of Finance  Research Papers, --, ISSN NO. 0973-8711, Department - HSS

49. P. Shukla, I. Tarannum, S. Roy, A. Rajput, P. Lama, S. K. Singh, J. Kłak, J Lee, S. Das “Effect of diamagnetic Zn(II) ions on the SMM properties of a series of trinuclear ZnDy2 and tetranuclear Zn2Dy2 (LnIII = Dy, Tb, Gd) complexes: combined experimental and theoretical studies”, Dalton transactions : an international journal of inorganic chemistry Research Papers, RSC, ISSN NO. 1477-9234, Department - BS

50. D Joshi, D Deb, AK Giri “MRAS disturbance observer-based sensorless field-oriented backstepping control of BLDC motor drive”, Electrical Engineering Research Papers, Springer, ISSN NO. 1432-0487, Department - ECE

51. MK Dikshit, VK Pathak “Stability lobe and chatter prediction based on modified zeroth-order approximation in high-speed ball end milling process”, International Journal on Interactive Design and Manufacturing (IJIDeM) Research Papers, Springer, ISSN NO. 1955-2505, Department - ME

52. A Gandhi, S Kumari, M Sunil Kumar, V Rakesh Kumar, Kumar A. et al. “Enhancing machining performance of Inconel 825 alloy using grey relation analysis and JAYA-TLBO optimization techniques”, International Journal on Interactive Design and Manufacturing (IJIDeM) Research Papers, Springer, ISSN NO. 1955-2505, Department - ME

53. G Choubey, P Chavda, W Huang “Three Dimensional CFD Analysis of two-strut assisted scramjet combustor”, International Journal of Fluid Mechanics Research Research Papers, BEGELL HOUSE, ISSN NO. 2152-5102, Department - ME

54. Sureja D., Kumari S., Bhavani B., Abhishek K., Chaudhari R., Singh M., Revathi V., Panchal S.M. “Experimental analysis and optimization of machining parameters for Nitinol alloy: A Taguchi and multi-attribute decision-making approach”, High Temperature Materials and Processes Research Papers, De Gruyter , ISSN NO. 2191-0324, Department - ME

55. H Singh, A Pratap, RN Yadav, D Das “Loss Aware Federated Learning for Service Migration in Multimodal E-Health Services”, IEEE Transactions on Services Computing Research Papers, IEEE, ISSN NO. 1939-1374, Department - ECE

56. Saurabh Sinha , Manisha Agarwal “An Empirical Enquiry Of Bank Employees’ Emotional Intelligence And Their Satisfaction With Jo”, Journal of Namibian Studies Research Papers, --, ISSN NO. 2197-5523, Department - HSS

57. Patel M., Likhar A.R., Bhojani A.K., Vaishnani A., Patel H., Singh D.K., Asthana D., Gour N. “New azo dyes for detection of metallic impurities”, Microchemical Journal Research Papers, Elsevier, ISSN NO. 0026-265X, Department - BS

58. Shivang Chauhan, Sanjay Dave, Jiten Shah, andAshu Kedia “Assessing Traffic Characteristics for Safe Pedestrian Crossings: Developing Warrants for Sustainable Urban Safety”, Sustainability Research Papers, MDPI, ISSN NO. 2071-1050, Department - CE

59. Singh P.; Sharma S.; Kumar K.; Iyer G.; Lal S.; Kumar A. “Viscoelastic behaviour of yttrium oxide and reduced graphene oxide embedded epoxy nanocomposite”, Engineering Research Express Research Papers, IOP, ISSN NO. 2631-8695, Department - ME

60. Srivastava M.; Singh G.; Verma K.; Pandey P.M.; Rana P.S.; Gupta M.K.; Khanna N. “Prediction of Surface Roughness in Hybrid Magnetorheological Finishing of Silicon Using Machine Learning”, Silicon Research Papers, Springer, ISSN NO. 1876-9918, Department - ME

61. MK Dikshit, C Suresh, H Vara, VK Pathak, KK Saxena “Sensitivity analysis of cutting parameters considering cutting forces and surface roughness in High Speed Ball End milling process”, International Journal on Interactive Design and Manufacturing  Research Papers, Springer, ISSN NO. 1955-2505, Department - ME

62. Manu Manohar E.; Roy S.; Li X.-L.; Tothadi S.; Mok J.-G.; Tang J.; Herchel R.; Lee J.; Dey A.; Das S. “Halide mediated modulation of magnetic interaction and anisotropy in dimeric Co(ii) complexes”, Dalton Transactions Research Papers, RCS, ISSN NO. 1477-9234, Department - BS

63. M. Faniband and P. Jadhav “Impact of economic policy uncertainty on Indian stock market returns: evidence from large-cap, mid-cap and small-cap stocks. International Journal of Financial Markets and Derivatives”, International Journal of Financial Markets and Derivatives Research Papers, Inder Science, ISSN NO. 1756-7149, Department - HSS

64. JJ Dabhi, PA Dabhi “On the UC∗ NP of the Lau product A× θ B”, Rendiconti del Circolo Matematico di Palermo Series 2 Research Papers, Springer, ISSN NO. 1973-4409, Department - BS

65. Abhijeet Ashok Salunke, Raghavendra Bhalerao, Krupa Shah Et al. “Fibrous Dysplasia Involving Cranio-Facial Region Treated with Zolendronic Acid: A Single Institutional Experience and Review of Literature”, Indian Journal of Otolaryngology and Head & Neck Surgery Research Papers, Springer, ISSN NO. 0973-7707, Department - ECE

66. N Chaudhary, MK Dikshit “Influence of h-BNNS Reinforcement on the Mechanical Properties of Pure Al-6082 Nanocomposite Fabricated using Stir Casting Method”, Composites: Mechanics, Computations, Applications: An International Journal Research Papers, BEGELL HOUSE, ISSN NO. 2152-2073, Department - ME

67. Redekar A.; Deb D. “Design of an advanced solar cooker with integrated self-powered active sun tracking and dual heating facilitated for rural communities”, International Journal on Interactive Design and Manufacturing Research Papers, Springer, ISSN NO. 1955-2505, Department - ECE

68. Aljamal D.; Salem A.; Khanna N.; Hegab H. “Towards sustainable manufacturing: A comprehensive analysis of circular economy key performance indicators in the manufacturing industry”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9929, Department - ME

69. Harshit Ratandhara, Mohit Kumar “An ????-cut Intervals based Fuzzy Best–Worst Method for Multi-Criteria Decision-Making”, Applied Soft Computing  Research Papers, Elsevier, ISSN NO. 1568-4946, Department - BS

70. T Rijwani, S Kumari, R Srinivas, K Abhishek, G Iyer “Industry 5.0: a review of emerging trends and transformative technologies in the next industrial revolution”, International Journal on Interactive Design and Manufacturing (IJIDeM) Research Papers, Springer, ISSN NO. 1955-2505, Department - ME

71. S Tated, G Anand, D Sadhwani “Simplified SEP Approximations of Coherent Digital Modulation Schemes over alpha-kappa-mu Fading Channel”, IEEE Latin America Transactions Research Papers, IEEE, ISSN NO. 1548-0992, Department - ECE

72. N Khanna, R Prajapati, G Bolar “Fabrication, machining (dry vs. cryogenic) and life cycle analysis of hybrid titanium composite laminates (HTCL)”, Machining Science and Technology Research Papers, T&F, ISSN NO. 1091-0344, Department - ME

73. M. Faniband and P. Jadhav “Determinants of government bond returns: an Indian experience”, International Journal of Computational Economics and Econometrics Research Papers, Inder Science, ISSN NO. 1757-1189, Department - HSS

74. S Chauhan; S Chaudhary “Isogeometric method for a nonlocal degenerate parabolic problem”, International Journal of Computer Mathematics Research Papers, T&F, ISSN NO. 1029-0265, Department - BS

75. SK Yadav, CB Khatri, A Kumar, S Chaturvedi “Optimization of twin grooved two-lobe textured hydrodynamic journal bearing design by using genetic algorithm”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science Research Papers, Sage Pub., ISSN NO. 0954-4062, Department - ME

76. N Chaudhary, MK Dikshit “Characterization of Graphene/h-BNNS Reinforced High Performance Polyurethane Nanocomposites Produced using Solvent Casting Method”, Composites: Mechanics, Computations, Applications: An International Journal Research Papers, Begell House, ISSN NO. 2152-2057, Department - ME

77. Rameshchandra S.M.; Dikshit M.K.; Kumar A.; Vora J.J.; Panchal S.M.; Bandhu D. “A novel intelligent tool wear monitoring system in ball end milling of Ti6Al4V alloy using artificial neural network”, High Temperature Materials and Processes Research Papers, De Gruyter , ISSN NO. 2191-0324, Department - ME

78. Makhesana M.A.; Bagga P.J.; Patel K.M.; Patel H.D.; Balu A.; Khanna N. “Comparative analysis of different machine vision algorithms for tool wear measurement during machining”, Journal of Intelligent Manufacturing Research Papers, Springer, ISSN NO. 1572-8145, Department - ME

79. Khanna N.; Salvi H.; Karaş B.; Fairoz I.; Shokrani A. “Cost Modelling for Powder Bed Fusion and Directed Energy Deposition Additive Manufacturing”, Journal of Manufacturing and Materials Processing Research Papers, MDPI, ISSN NO. 2504-449, Department - ME

80. Hakani, R., Prajapati, S., & Rawat, A. “Optimizing UAV Detection Performance with YOLOv5 Series Algorithms”, International Journal of Microsystems and IoT Research Papers, , ISSN NO. 2584-0495 , Department - ECE

81. I Watitula Longkumer “Decolonizing Higher Education Curricula: Perspectives from Teaching Indigenous Literature”, Higher Education for the Future Research Papers, Sage Pub., ISSN NO. 2348-5779, Department - HSS

82. Ingle M.; Sharma M.; Verma S.; Sharma N.; Bhurane A.; Rajendra Acharya U. “Automated explainable wavelet-based sleep scoring system for a population suspected with insomnia, apnea and periodic leg movement”, Medical Engineering and Physics Research Papers, Elsevier, ISSN NO. 1873-4030, Department - ECE

83. A P. Yadav, A K. Bhojani, K. Bhargava, D. K. Singh “Impact of Structural Strain on Performance of Halide Perovskite Solar Cells: A Combined DFT and SCAPS-1D Analysis”, Advanced Theory and Simulations Research Papers, Wiley, ISSN NO. 2513-0390, Department - ECE

84. Sathavara P.; Parwani A.K.; Chaudhuri P. “Predicting energy transfer to the workpiece in wire electrical discharge machining using inverse heat transfer technique”, Heat and Mass Transfer/Waerme- und Stoffuebertragung Research Papers, Springer, ISSN NO. 0947-7411, Department - ME

85. Patil S.V.; Bhargava K. “Semiconductors for Solar Cells”, Handbook of Semiconductors: Fundamentals to Emerging Applications Research Papers, Springer, ISSN NO. 1059-9495, Department - ME

86. J Miao, D Rajasekhar, S Mishra, SK Nayak, R Yadav “A Microservice-Based Smart Agriculture System to Detect Animal Intrusion at the Edge”, Future Internet Research Papers, MDPI, ISSN NO. 1999-5903, Department - ECE

87. K Patel, D Chauhan, P Mishra, JJ Rath, KK Saxena et al. “Design and development of a modular hydroponic tower with topology optimization”, International Journal on Interactive Design and Manufacturing (IJIDeM) Research Papers, Springer, ISSN NO. 1955-2505, Department - ME

88. Khanna P.; Ramkumar P.L. “Assessing feasibility of peanut shell powder/linear low-density polyethylene for rotational moulding process”, Sadhana - Academy Proceedings in Engineering Sciences Research Papers, Springer, ISSN NO. 0973-7677, Department - ME

89. Yadav J.; Ramkumar P.L.; Parwani A.K. “Characterization of Azadirachta indica Natural Cellulosic Fiber and Its Polymer Composites”, Arabian Journal for Science and Engineering Research Papers, Springer, ISSN NO. 2191-4281, Department - ME

90. Parmar M.; Shukla V.; Bandyopadhyay M.; Singh D.K.; Gaur R.; Shahabuddin S. “Synthesis of eco-friendly polyaniline-zeolite nanocomposite for pollutant remediation: Empowered by robust machine learning algorithm”, Journal of Cleaner Production Research Papers, Elsevier, ISSN NO. 1879-1786, Department - BS

91. Madhu M.; Kiran M.; Kumar D. “Numerical simulation of N-tetradecane PCM for enhanced cold chain logistics in refrigerated trucks: Integrating experimental data for improved energy efficiency and power crisis management”, Journal of Energy Storage Research Papers, Elsevier, ISSN NO. 2352-1538, Department - ME

92. AS Reddy, KKR Iyer, VM Rotte, TN Dave “Performance of Alkali Activated Slag Stabilized Landfill Mined Soil-Like Fraction Exposed to Different Climatic Conditions”, International Journal of Geosynthetics and Ground Engineering Research Papers, Springer, ISSN NO. 2199-9279, Department - CE

93. Yadav J.; Ramkumar P.L.; Parwani A.K. “Structure–property correlation assessment of LLDPE-based biocomposites with Azadirachta Indica wood flour”, Journal of Applied Polymer Science Research Papers, Wiley, ISSN NO. 1097-4628, Department - ME

94. M. Elenchezhiyan & Ajit Kumar “A comparison of adaptive optimizers for nonlinear aerodynamic modeling using flight test data”, Aerospace Systems Research Papers, Springer, ISSN NO. 2523-3955, Department - ME

95. Gajjar H.H.; Upadhyay D.; Hussain M.; Jeyaraman J.D. “Outdoor thermal sensation scale through biometeorological assessment for semi-arid climate”, International Journal of Biometeorology Research Papers, Springer, ISSN NO. 1432-1254, Department - CE

96. K Bhatt, N Chaudhari & J Shah “Consequences of Pandemic on Transport Infrastructure, Safety and Environment 46 ”, INDIAN HIGHWAYS Research Papers, Indian Road Congress, ISSN NO. 0376-7256, Department - CE

97. Patel T.; Chauhan P. “Presynchronization of Weak Source in Microgrid”, IEEE Transactions on Power Electronics Research Papers, IEEE, ISSN NO. 0885-8993, Department - ECE

98. A Pandey, M Kallamadi, K Shah “Cascaded AC–DC Voltage Control to Provide Reactive Power Support for the PV-Driven Grid-Tied Synchronverter”, International Journal of Circuit Theory and Applications Research Papers, Wiley, ISSN NO. 1097-007X, Department - ECE

99. E Şirin, E Uysal, N Khanna, Ş Şirin “An Investigation of Deep Wear Status Assessment of AISI 329 Material Under Green Nanofluid Conditions”, Arabian Journal for Science and Engineering Research Papers, Springer, ISSN NO. 2191-4281, Department - ME

100. JR Li, N Tsunoji, M Bandyopadhyay, M Sadakane “High-Efficiency Silane Utilization in Amine-Modified Adsorbents for Direct Air Capture through Interconnected Three-Dimensional Pores”, Langmuir Research Papers, ACS Pub., ISSN NO. 1520-5827, Department - BS

101. Khanna P.; Ramkumar P.L. “An Approach Toward Assessing Linear Low-Density Polyethylene/Alkali-Treated Peanut Shell Fiber Blends for Rotational Molding”, Journal of Macromolecular Science, Part B: Physics Research Papers, T&F, ISSN NO. 1525-609X, Department - ME

102. RM Raghavendra, A Subramaniam, G Iyer “Coherent to semi-coherent transition of precipitates in Van der Merwe epitaxial films”, Modelling and Simulation in Materials Science and Engineering Research Papers, IOP Science, ISSN NO. 1361-651X, Department - ME

103. MK Dikshit, K Joshi, G Choubey “Preface: Computational Modeling and Development of High-Performance Composites and Its Applications”, Composites: Mechanics, Computations, Applications: An International Journal Research Papers, Begell house, ISSN NO. 2152-2073, Department - ME

104. Choubey G.; Solanki M.; Tripathi S.; Kaushik M. “LES investigation of a H2-fueled supersonic combustor: A two-strut injection approach”, International Journal of Hydrogen Energy Research Papers, Elsevier, ISSN NO. 1879-3487, Department - ME

105. Khanna N.; Shah P.; Singla A.K.; Bansal A.; Makhesana M.A.; Sirin “Comparison of VT-20 alloy drilling performance evaluation under dry, MQL, EMQL, and hybrid nanoparticle assisted EMQL ecological conditions”, Tribology International Research Papers, Elsevier, ISSN NO. 1879-2464, Department - ME

106. M Pandey, N Tsunoji, K Bhattacharyya, S Das & M Bandyopadhyay “Photocatalytic degradation of organic dyes under sunlight using a mononuclear Zn complex‑embedded‑functionalized porous material”, Environmental Science and Pollution Research Research Papers, Springer, ISSN NO. 1614-7499, Department - BS

107. Abhishek Sutar, Veerabhadra Rotte “A novel test set up to study three-dimensional electrokinetic dewatering of dredged soil”, Journal of Environmental Management Research Papers, Elsevier, ISSN NO. 1095-8630, Department - CE

108. Sathavara P.; Parwani A.K.; Chaudhuri P. “Estimation of heat source, specific heat, and thermal conductivity of insulation materials using modified conjugate gradient method”, Energy Research Papers, Elsevier, ISSN NO. 0360-5442, Department - ME

109. Raj Hakani and Abhishek Rawat “Edge Computing-Driven Real-Time Drone Detection Using YOLOv9 and NVIDIA Jetson Nano”, Drones Research Papers, MDPI, ISSN NO. 2504-446X, Department - ECE

110. I Watitula Longkumer and Ujjwal Jana “Carving a Niche: An Interview with Temsula Ao”, Postcolonial Text  Research Papers, OHP, ISSN NO. 1705-9100, Department - HSS

111. Sharma, H., and Mohapatra, P. K “Modified tractive force approach for sediment transport under bank seepage”, ISH Journal of Hydraulic Engineering Research Papers, T&F, ISSN NO. 2164-3040, Department - CE

112. Yadav J.; Ramkumar P.L.; Parwani A.K. “Fly Ash-Linear Low Density Polyethylene Composites for Rotational Molding: Morphological and Thermal Analysis”, Journal of Materials Engineering and Performance Research Papers, Springer, ISSN NO. 1544-1024, Department - ME

113. Singh P.; Sharma S.; Kumar K.; Lal S.; Iyer G.; Kumar A. “Synergetic Effect of TiO2 Toward Mechanically and Thermally Stable Hybrid Epoxy Nanocomposites: A Review”, Polymer-Plastics Technology and Materials Research Papers, T&F, ISSN NO. 2574-089X, Department - ME

114. M Sharmaa, V Azada, H Telangorea, A Bhurane at el. “Early prediction of sudden cardiac death using multimodal fusion of ECG Features extracted from Hilbert–Huang and wavelet transforms with explainable vision transformer and CNN models”, Computer Methods and Programs in Biomedicine Research Papers, Elsevier, ISSN NO. 1872-7565, Department - ECE

115. Jadav D.; Pandey M.; Bhojani A.K.; Amen T.W.M.; Tsunoji N.; Singh D.K.; Bandyopadhyay M. “Mesoporous silica supported ionic liquid materials with high efficacy for CO2 adsorption studies”, Journal of Ionic Liquids Research Papers, Elsevier, ISSN NO. 2772-4220, Department - BS

116. H. M. Ratandhara, M. Kumar “An Analytical Framework for the Multiplicative Best-Worst Method”, Journal of Multi-Criteria Decision Analysis  Research Papers, Wiley, ISSN NO. 1099-1360, Department - BS

117. H Telangore, N Sharma, M Sharma, UR Acharya “A Novel ECG-Based Approach for Classifying Psychiatric Disorders: Leveraging Wavelet Scattering Networks”, Medical Engineering & Physics Research Papers, Elsevier, ISSN NO. 1873-4030, Department - ECE

118. MK Saini, S Gautam, G Choubey, S Tripathi “Analysis of Core-Annular Flow With Power Law Fluid in The Annular Region Lubricating High-Viscosity Newtonian Fluid”, Multiphase Science and Technology Research Papers, BEGELL HOUSE, ISSN NO. 1943-6181, Department - ME

119. J Yadav, PL Ramkumar, AK Parwani “Transforming fly ash into value: Sustainable LLDPE-fly ash composites via rotational molding”, Journal of Thermoplastic Composite Materials Research Papers, Sage, ISSN NO. 1530-7980, Department - ME

120. Khanna N.; Patel D.; Raval P.; Airao J.; Badheka V.; Rahman Rashid R.A. “Comparison of sustainable cooling/lubrication strategies for drilling of wire arc additively manufactured Inconel 625”, Tribology International Research Papers, Elsevier, ISSN NO. 1879-2464, Department - ME

121. Parmar K.; Parmar N.; Parwani A.K.; Tripathi S. “Experimental studies and machine learning approaches for thermal parameters prediction and data analysis in closed-loop pulsating heat pipes with Al2O3-DI water nanofluid”, Journal of Thermal Analysis and Calorimetry Research Papers, Springer, ISSN NO. 1588-2926, Department - ME

122. D Joshi, D Deb, AK Giri, I Colak “Efficient Input-Output Feedback Linearizing Control of BLDC Drives”, International Journal of Circuit Theory and Applications Research Papers, Wiley, ISSN NO. 1097-007X, Department - ECE

123. K Parmar, I Nagme, S Thakur, A Singh, AK Parwani “Thermal performance comparison of closed loop pulsating heat pipe with DI water and Al2O3/DI nanofluid”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

124. R Raj, D Bandhu, S Kumari, K Abhishek “Machinability study of laser beam drilling on GFRP composites using Taguchi-based grey relational analysis”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

125. R Raj, D Bandhu, S Kumari, K Abhishek “Machinability study of laser beam drilling on GFRP composites using Taguchi-based utility function approach”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

126. SK Yadav, CB Khatri, GD Thakre “Performance enhancement of hole entry textured journal bearing by using genetic algorithm”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

127. M Singh, S Kumari, B Begam, A Biswas, K Abhishek “Design and analysis of aircraft wing aileron employing various composites to find the optimal material”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

128. A Patel, U Rai, Y Patel, P Sathavara, AK Parwani “Numerical simulations on curved winglet for modulation of lift and drag coefficient”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

129. M Deshmukhe, Y Raut, K Joshi “A review on fabrication of inconel alloys using different additive manufacturing techniques”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

130. S Singh, S Tripathi, A Patel, Y Patel, A Parwani “Review on loop heat pipe: An advancement in heat transfer technology”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

131. N Tiwari, Y Patel, AK Parwani, DK Singh “Improvement in CI engine performance using blend of diesel-ionic liquid”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

132. Gautam S.; Saini M.; Tripathi S. “Pressure drop and holdup models in oil-water core-annular flow: A review”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

133. Roy K.; Ramkumar P.L. “Finite element analysis of pressure vessel with different end connections”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

134. Prajapati H.; Patel C.; Gupta S.; Singh G.K.; Gupta D.K. “Challenges and barriers of rooftop solar adaption-a study from rural part of Gujarat India using weighted average method and Garrett ranking method”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

135. Shah S.; Parwani A.K. “On the hybrid methods used for solving inverse heat transfer problems”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

136. Yadav R.; Lata M.; Kumari S.; Gupta D.K. “Utilization of CO2as refrigerant for supermarket application: An energy and economic assessment”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

137. Jha A.K.; Sridhar V.; Azad V.; Yadav R.; Rath J. “Integration of ROS and Gazebo Platform using MAVLINK Protocol for Real-Time UAV Applications”, ACM International Conference Proceeding Series Conference Paper, ACM, ISSN NO. 9798400716737, Department - ECS

138. DA Vyas, M Chaturvedi “DriverSense: A Multi-Modal Framework for Advanced Driver Assistance System”, 16th International Conference on COMmunication Systems & NETworkS (COMSNETS) Conference Paper, IEEE, ISSN NO. 979-8-3503-8311-9, Department - ECS

139. Nikita Joshi and Axaykumar Mehta “Distributed Exponential Discrete-time Sliding Mode Consensus Protocol for Multi-Agent System”, 2023 IEEE 2nd International Conference on Data, Decision and Systems (ICDDS) Conference Paper, IEEE, ISSN NO. 979-8-3503-1416-8, Department - ECS

140. Tripathi, S. “Effects of Power Law Fluid Characteristics on Core-Annular Flow in a Horizontal Pipe”, 9th International and 49th National Conference on Fluid Mechanics and Fluid Power, FMFP 2022; Conference Paper, Springer, ISSN NO. 978-981996073-6, Department - ME

141. Joshi N.; Mehta A. “Distributed Discrete-Time Exponential Sliding Mode Consensus Protocol for a Multi-Agent System”, 2023 IEEE 2nd International Conference on Data, Decision and Systems, ICDDS 2023 Conference Paper, IEEE, ISSN NO. 979-8-3503-1416-8, Department - ECS

142. Chaturvedi M.; Srivastava S. “Modelling and Analysis of Walk and Intelligent Feeder Service Based Last Mile Connectivity to Metro Stations”, 2023 IEEE 26th International Conference on Intelligent Transportation Systems (ITSC) Conference Paper, IEEE, ISSN NO. 979-8-3503-9946-2, Department - ECS

143. Koganti Y.; Yadav R.N.; Pratap A. “Optimizing Resource Utilization and QoS-Conscious Application Deployment Through AHP in Edge Computing”, 2024 16th International Conference on COMmunication Systems and NETworkS, COMSNETS 2024 Conference Paper, IEEE, ISSN NO. 979-8-3503-8311-9, Department - ECS

144. A. Modi, N. Joshi and A. Mehta “Distributed Super-Twisting Sliding Mode Protocol for Formation and Tracking of Multiple Quadcopters”, IEEE R10 Humanitarian Technology Conference (HTC2023) Conference Paper, IEEE, ISSN NO. 979-8-3503-2614-7, Department - ECS

145. R Lekkireddy; P Magdum; C Parekh; K Shah “Estimation of Series- and Shunt-Capacitances of a Single-Phase Core-Type Transformer Windings”, 2024 IEEE Texas Power and Energy Conference (TPEC) Conference Paper, IEEE, ISSN NO. 979-8-3503-3120-2, Department - ECS

146. Shahi G.; Saha S.; Rath J.J. “Comparative Analysis of Fuzzy based Controller for Lane Keeping Assistance”, 2024 11th International Conference on Reliability, Infocom Technologies and Optimization (Trends and Future Directions), ICRITO 2024 Conference Paper, IEEE, ISSN NO. 979-8-3503-5035-7, Department - ME

147. V Kumar; P Magdum; R Lekkireddy; K Shah “Comprehensive Approaches for the Differential Protection of Power Transformers Using Advanced Classification Techniques ”, IEEE/IAS 60th Industrial and Commercial Power Systems Technical Conference  Conference Paper, IEEE, ISSN NO. 979-8-3503-4530-8, Department - ECS

148. S Kulkarni, VK Deshpande, R Bhalerao “Advanced classified turning traffic volume module at Unsignalized Intersection”, 2024 IEEE 9th International Conference for Convergence in Technology (I2CT) Conference Paper, IEEE, ISSN NO. 979-8-3503-9447-4, Department - ECS

149. Ajit Kumar; A K Ghosh “Ensemble Machine Learning Methods for Unsteady Aerodynamics Modeling from Flight Data”, 10th International Conference on Control, Automation and Robotics (ICCAR) 2024 Conference Paper, IEEE, ISSN NO. 979-8-3503-7317-2, Department - ME

150. Vara, H., Dikshit, M.K. “Study of Surface Roughness in CNC Turning of EN8 Steel: An Experimental Approach”, Advances in Manufacturing Engineering: Select Proceedings of ICFAMMT 2024 Conference Paper, Springer, ISSN NO. 978-981-97-4324-7, Department - ME

151. Shrimali, M., Dikshit, M.K., Kumar, A. “Experimental Analysis of Tool Wear in Ball End Milling Process of Ti6Al4V Alloy”, Advances in Manufacturing Engineering: Select Proceedings of ICFAMMT 2024 Conference Paper, Springer, ISSN NO. 978-981-97-4324-7, Department - ME

152. Katakpara, J., Bhati, Y., Badheka, V., Khanna, N. “Enhancing TIG Welding Performance on Monel 400: Key Parameters”, Advances in Manufacturing Engineering: Select Proceedings of ICFAMMT 2024 Conference Paper, Springer, ISSN NO. 978-981-97-4324-7, Department - ME

153. Bhati, Y., Katakpara, J., Badheka, V., Khanna, N. “Experimental Investigation of Activated-TIG Process for Monel 400 Alloy”, Advances in Manufacturing Engineering: Select Proceedings of ICFAMMT 2024 Conference Paper, Springer, ISSN NO. 978-981-97-4324-7, Department - ME

154. C Massaroni, F De Tommasi, D Lo Presti, M Sharma et al. “Mechanical Coupling Between Body And Bed For Estimating Sleep-Related Biomarkers: A Feasibility Study”, 2024 IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0 & IoT) Conference Paper, IEEE, ISSN NO. 2837-0872, Department - ECE

155. S Kumari, P Vishwakarma, K Abhishek “Advancements in 3D Printing Materials for Diverse Industries: A Review and Future Prospects”, 16th International Conference on Materials Processing and Characterization (ICMPC 2024) Conference Paper, E3S Web of Conferences, ISSN NO. 2267-1242, Department - ME

156. D Makwana, Z Najah, D Soni, HB Valiveti “Enhancing sleep pattern assessment with biocompatible smart materials”, 16th International Conference on Materials Processing and Characterization (ICMPC 2024) Conference Paper, E3S Web of Conferences, ISSN NO. 2267-1242, Department - ME

157. Nahar A.; Das D.; Yadav R.; Khujamatov K.; Reypnazarov E. “RF-CVN: Recurrent Reinforcement Learning Framework for Cognitive Vehicular Ad-Hoc Networks Routing”, IEEE Wireless Communications and Networking Conference, WCNC Conference Paper, IEEE, ISSN NO. 1558-2612, Department - ECE

158. Manthan S. Dhavne & Jiten H. Shah “Monetary Evaluation of Congestion at Signalized Intersections in Ahmedabad”, Innovation in Smart and Sustainable Infrastructure, Volume 2, Select Proceeding of ISSI 2022 Conference Paper, Springer, ISSN NO. 2366-2557, Department - CE

159. Nishyal Sangani & Jiten Shah “Investigation on Parking Characteristics and Possible Solutions: A Case Study of Ahmedabad City”, Innovation in Smart and Sustainable Infrastructure, Volume 2, Select Proceeding of ISSI 2022 Conference Paper, Springer, ISSN NO. 978-981-97-3994-3, Department - CE

160. Bhatt, K., Kshirsagar, V., Shah, J., Bhalerao, R. “A Novel Approach for Vehicle Classification and Counting at an Unsignalized Intersection”, Innovation in Smart and Sustainable Infrastructure, Volume 2, Select Proceeding of ISSI 2022 Conference Paper, Springer, ISSN NO. 978-981-97-3994-3, Department - ECE

161. Maharshi Shukla & Jiten Shah “Effectiveness of Polypropylene Fibre on Subgrade Sand of Flexible Pavement”, Innovation in Smart and Sustainable Infrastructure, Volume 2, Select Proceeding of ISSI 2022 Conference Paper, Springer, ISSN NO. 978-981-97-3994-3, Department - ECE

162. Sathavara P.; Kumar M.; Desai A.; Parwani A.K.; Chaudhuri P. “Estimation of Energy Transmission to Workpiece in Wire Electrical Discharge Machining Process”, Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023) Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-3-031-67240-8, Department - ME

163. M Parmar, M Bandyopadhyay, R Gaur & S Shahabuddin “Synthesis and Characterization of Amine-Functionalized Zeolite 4A for Wastewater Treatment”, Advances in Water Treatment and Management: Select Proceedings of ICAWTM 2023 Conference Paper, Springer, ISSN NO. 978-981-97-5954-5, Department - Chem

164. Wanare R.; Iyer K.K.R. “Study on the Effect of Alkali Activated Ground Granulated Blast Furnace Slag on Cracking and Shrinkage Characteristics of Marine Soil”, Proceedings of 9IYGEC 2023, Volume 1, Lecture Notes in Civil Engineering Conference Paper, Springer, ISSN NO. 978-981-97-6643-7, Department - CE

165. ID Pharne, SV Patil, K Bhargava “Effect of Defect Concentration on Photovoltaic Cell and Module Performance”, Advances in Photonics and Electronics: Innovations for Smart and Sustainable Development Conference Paper, Springer, ISSN NO. 978-3-031-68040-3, Department - ECE

166. M Dabhi, M Langhi  “Improved One-Dimensional Velocity Deformation Model for Unsteady Flows”, Hydraulics and Fluid Mechanics, Volume 2: Select Proceedings of HYDRO 2023 Conference Paper, Springer, ISSN NO. 978-981-97-8894-1, Department - CE

167. R Kashyap, M Langhi, H Sharma  “Numerical Estimation of Flow Field Around Bridge Piers Using Turbulence Models”, Hydraulics and Fluid Mechanics, Volume 2: Select Proceedings of HYDRO 2023 Conference Paper, Springer, ISSN NO. 978-981-97-8894-1, Department - CE

168. Ajit K Parwani, PL. Ramkumar, K Abhishek, D K Gupta, and S K Yadav “Volume 2960 is the proceedings of Fourth International Conference on Recent Advances in Mechanical Infrastructure (16–18 December 2022, Ahmedabad, India)”, AIP Pub. Book Chapters, , ISSN NO. 9780735447806, Department - ME

169. P Jain, K Abhishek, P Chatterjee (Eds.) “Decision-Making Models and Applications in Manufacturing Environments”, AAP Research Notes on Optimization and Decision Making Theories, CRC Press Book Chapters, , ISSN NO. 9781774913550, Department - ME

170. M SHAH, YUG MODI, DIN BANDHU, S KUMARI and Kumar Abhishek “Selection of Cutting Fluids for Machining Titanium Alloys Using MCDM Methods (Book Title: Decision-Making Models and Applications in Manufacturing Environments)”, AAP Research Notes on Optimization and Decision Making Theories, CRC Press Book Chapters, , ISSN NO. 9781774913550, Department - ME

171. JAY VAISHNANI, NK LAXKAR, DIN BANDHU, Kumar Abhishek and Soni Kumar “Identification of Problems and Their Prioritization in Textile Industries Using MADM Techniques: Fuzzy-TOPSIS and Fuzzy-VIKOR Methods (Book Title: Decision-Making Models and Applications in Manufacturing Environments)”, AAP Research Notes on Optimization and Decision Making Theories, CRC Press Book Chapters, , ISSN NO. 9781774913550, Department - ME

172. A SINGH, A GUPTA, DIN BANDHU, S KUMARI, Dileep Kumar Gupta, Kumar Abhishek “Selection of Refrigerants for Domestic Applications Using Madm Techniques (Book Title: Decision-Making Models and Applications in Manufacturing Environments)”, AAP Research Notes on Optimization and Decision Making Theories, CRC Press Book Chapters, , ISSN NO. 9781774913550, Department - ME

173. S Chatterjee, P Subudhi, D Bandhu, K Abhishek, S S Mahapatra “Experimental Analysis and Optimization of Drilling of Glass Fiber Reinforced Plastics Composites Using Madm Methodology: Utility Concept (Book Title: Decision-Making Models and Applications in Manufacturing Environments)”, AAP Research Notes on Optimization and Decision Making Theories, CRC Press Book Chapters, , ISSN NO. 9781003394723, Department - ME

174. Axaykumar Mehta and Akash Modi “Robust Sliding Mode Protocols For Formation of Quadcopter Swarm”, Studies in Systems, Decision and Control (SSDC, volume 521), Springer Book Chapters, , ISSN NO. 978-981-99-9726-8, Department - ECS

175. AK Bhojani, S Singh, DK Singh “Saga and Developments of Raman Spectroscopy (Book Title: Raman Spectroscopy: Advances and Applications)”, Springer Series in Optical Sciences ((SSOS,volume 248)) Book Chapters, , ISSN NO. 978-981-97-1703-3, Department - BS

176. P Goge, S Saspara, J Shah “Green Buildings and Smart Cities: A Perfect Harmony of Sustainability and Progress”, Smart Cities, Springer Book Chapters, , ISSN NO. 978-3-031-59846-3, Department - CE

177. Pamela Pati and I. Watitula Longkumer “Journeying through the Lesser-Known Indian Spaces: A Reading of Biswanath Ghosh’s Chai, Chai (Book Title: Language and Cross-Cultural Communication in Travel and Tourism: Strategic Adaptations)”, CRC Press Book Chapters, , ISSN NO. 9781003477143, Department - HSS

178. M K Dikshit, N Khanna, A Soni, A P Markopoulos “Advances in Manufacturing Engineering: Select Proceedings of ICFAMMT 2024”, Lecture Notes in Mechanical Engineering (LNME), Springer Book Chapters, , ISSN NO. 978-981-97-4324-7, Department - ME

179. Jiten Shah, Priyank Trivedi “Sustainable Urban Transportation in India (Book Title: Civil Engineering Innovations for Sustainable Communities with Net Zero Targets)”, CRC Press Book Chapters, , ISSN NO. 9781032686899, Department - CE

180. Chaudhary N.; Rana J.; Dikshit M.K. “Atomistic Modelling and Molecular Dynamics Simulation for Elastic Deformation in Nanocomposites (book Title: Deformation and Fracture in Materials)”, CRC Press Book Chapters, , ISSN NO. 9781003359364, Department - ME

181. Gautam Choubey, Sumit Tripathi, V. K. Singh, P. M. V. Subbarao “Advances in Thermal Engineering: Select Proceedings of ICFAMMT 2024”, Lecture Notes in Mechanical Engineering (LNME), Springer Book Chapters, , ISSN NO. 978-981-97-4500-5, Department - ME

182. Santosh V. Patil and Kshitij Bhargava “Semiconductors for Solar Cells (Book Title: Handbook of Semiconductors Fundamentals to Emerging Applications)”, CRC Press Book Chapters, , ISSN NO. 9781032584553, Department - ECS

183. P Arote, P Jadhav, R N Choudhury, and H Sagara “India-ASEAN Free Trade Agreement: Impact, Issues, and Challenges in Act East Policy (Book Title: India and Southeast Asia in a Changing WorldExploring Relationship Prospects for a Sustainable Future)”, T&F Book Chapters, , ISSN NO. 9781003570745, Department - HSS

184. S Joshi, M Vasani “The Gondian Maja Tolas: A Perishing Natural Habitat”, Tribal Studies : A Journal of COATS Research Papers, Journal of COATS Council of Analytical Tribal Studies (COATS), Koraput, ISSN NO. , Department - HSS

185. M Pipariya and M. R. Sharma “Behaviour of Steel Built Up Channel Section Under Biaxial Eccentric Load”, International Conference on Recent Advances in Infrastructure Development(RAID-24) Conference Paper, NOLEGEIN, ISSN NO. 978-81-952903-7-6, Department - CE

1. Paredi P.; Pandey M.; Tsunoji N.; Prajapati R.; Das S.; Bandyopadhyay M. “Mononuclear Cu-complex embedded ordered nano-porous silica based hybrid catalyst for oxidation of benzyl alcohol”, Molecular Catalysis Research Papers, Elsevier, ISSN NO. 2468-8231, Department - BS

2. N Chaudhary, MK Dikshit, CL Kumar, P Sonia and et al. “Sustainable mechanical properties evaluation for graphene reinforced Epoxy/Kevlar fiber using MD simulations”, Journal of Experimental Nanoscience  Research Papers, T&F, ISSN NO. 1745-8080, Department - ME

3. Khanna N.; Airao J.; Kshitij G.; Nirala C.K.; Hegab H. “Sustainability analysis of new hybrid cooling/lubrication strategies during machining Ti6Al4V and Inconel 718 alloys”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

4. Alanwar A.; Rath J.J.; Said H.; Johansson K.H.; Althoff M. “Distributed set-based observers using diffusion strategies”, Journal of the Franklin Institute Research Papers, Elsevier, ISSN NO. 0016-0032, Department - ME

5. Khanna N.; Kshitij G.; Solanki M.; Bhatt T.; Patel O.; Uysal A.; Sarıkaya M. “In pursuit of sustainability in machining thin walled α‑titanium tubes: An industry supported study”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

6. Koshti H.; Bandyopadhyay M.; Bandyopadhyay R. “Post-synthetically modified hierarchical Mordenite and ZSM-5 zeolite and their catalytic performances in benzylation of acetic acid to benzyl acetate”, Journal of Materials Science Research Papers, Springer, ISSN NO. 0022-2461, Department - BS

7. A S Bale, R S Solanki, V. Mouneswari, S Sanamdikar, P Gulati, P U Trivedi “Psychological Confidence by Ai: Enhancement Quality & Future of Mobility for People with Disabilities of Neurological Impairment”, Journal for Re Attach Therapy and Developmental Diversities Research Papers, , ISSN NO. 2589-7799, Department - CE

8. Hegab H.; Shaban I.; Jamil M.; Khanna N. “Toward sustainable future: Strategies, indicators, and challenges for implementing sustainable production systems”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

9. Usluer E.; Emiroğlu U.; Yapan Y.F.; Kshitij G.; Khanna N.; Sarıkaya M.; Uysal A. “Investigation on the effect of hybrid nanofluid in MQL condition in orthogonal turning and a sustainability assessment”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

10. Faniband, M., & Jadhav, P. “Impact of Geopolitical Risks on the Stock Market: Evidence from Large, Mid, and Small-Cap Stocks”, Arthshastra Indian Journal of Economics & Research Research Papers, --, ISSN NO. 2278 - 1811, Department - HSS

11. Pandey D.K.; Jadav D.; Tsunoji N.; Singh D.K.; Dharaskar S.; Bandyopadhyay M. “Imidazolium-based ionic liquid supported layered silicate HUS-7 as an active catalyst for ring opening of oxiranes”, Journal of Materials Science Research Papers, Springer, ISSN NO. 0022-2461, Department - BS

12. Dhuria M.; Pradhan A. “Synergy between Hubble tension motivated self-interacting neutrinos and KeV-sterile neutrino dark matter”, Physical Review D Research Papers, APS, ISSN NO. 2470-0010, Department - BS

13. Pimenov D.Y.; Berti L.F.; Pintaude G.; Peres G.X.; Chaurasia Y.; Khanna N.; Giasin K. “Influence of selective laser melting process parameters on the surface integrity of difficult-to-cut alloys: comprehensive review and future prospects”, International Journal of Advanced Manufacturing Technology Research Papers, Springer, ISSN NO. 1433-3015, Department - ME

14. M. Faniband, P. Jadhav “Economic Policy Uncertainty and Government Bond Prices”, Indian Journal of Finance  Research Papers, --, ISSN NO. 0973-8711, Department - HSS

15. Khushbu Bhatt, Ninad Gore, Jiten Shah and Shriniwas Arkatkar “Drivers’ Dilemma at High-Speed Unsignalized Intersections”, Transportation Research Record: Journal of the Transportation Research Board Research Papers, Sage, ISSN NO. 0361-1981, Department - CE

16. M. Sharma, H. Lodhi, R. Yadev, N. Sampathila, K. S. Swathi, and U. R. Acharya “Automated Explainable Detection of Cyclic Alternating Pattern (CAP) Phases and Sub-Phases Using Wavelet-Based Single-Channel EEG Signals”, IEEE Access Research Papers, IEEE, ISSN NO. 2169-3536, Department - ECE

17. Rohit Prajapati, Nao Tsunoji, Mahuya Bandyopadhyay & Rajib Bandyopadhyay “Hierarchical, amine functionalized silicoaluminophosphate molecular sieves for the synthesis of cyclic carbonate via CO2 utilization”, Journal of Porous Materials Research Papers, Springer, ISSN NO. 1573-4854, Department - BS

18. PS Paredi, M Pandey, EM Manohar, N Tsunoji, S Shahabuddin, S Das & M Bandyopadhyay “Ni4 complex anchored porous silica for enhanced adsorption of organic pollutants in the wastewater”, Environmental Science and Pollution Research Research Papers, Springer, ISSN NO. 1614-7499, Department - BS

19. Pandey D.K., Joshi N., Singh D.K. “Impact of water and metal oxide nanoparticles on the structure and properties of 1-ethyl-3-methylimidazolium methylsulfate ionic liquid for solar thermal applications”, Materials Today Communications Research Papers, Elsevier, ISSN NO. 2352-4928, Department - BS

20. Muchhadiya A.; Kumari S.; Bandhu D.; Abhishek K.; Vora J.J. “Elucidating the Effect of Friction Stir Welding Variables on HDPE Sheets Using Grey Integrated with Fuzzy: Experimental Investigation and Parametric Optimization”, Journal of The Minerals, Metals & Materials Society (JOM) Research Papers, Springer, ISSN NO. 1047-4838, Department - ME

21. Yadav J.; Ramkumar P.; Parwani A.K. “A comprehensive review to evaluate the consequences of material, additives, and parameterization in rotational molding”, Journal of Polymer Research Research Papers, Springer, ISSN NO. 1022-9760, Department - ME

22. Swami J.; Dixit A.; Tiwari B. “Onset of Antiferromagnetic Insulator-to-Ferromagnetic Half Metal-to-Antiferromagnetic Metal Transitions in La1−xCaxCrO3 and their Microscopic Origin”, Physica Status Solidi (B) Basic Research Research Papers, Wiley, ISSN NO. 1521-3951, Department - BS

23. Patil M., Dalal P. H., Salifu E., Iyer K. K. R., Dave T. N. “Biostabilization of soils as sustainable pathway for anti-desertification: Present and future perspectives”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - CE

24. Shah V., Wanare R., Iyer K. K. R., Rotte V. M. “Evaluation of the role of fibres and admixture(s) on sustainable crack reduction in expansive soil”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - CE

25. Pooja Shukla, Sourav Das, Prasenjit Bag and Atanu Dey “Magnetic Materials Based on Heterometallic CrII/III‒LnIII Complexes”, Inorganic Chemistry Frontiers Research Papers, RSC, ISSN NO. 2052-1545, Department - BS

26. J Swami, A Dixit, B Tiwari  “Onset of antiferromagnetic insulator to ferromagnetic half‐metal to antiferromagnetic metal transitions in La1‐xCaxCrO3 and their microscopic origin”, Physica status solidi. B Research Papers, Wiley, ISSN NO. 1521-3951, Department - BS

27. Dikshit M.K., Singh S., Pathak V.K., Saxena K.K., Agrawal M.K., Malik V., Salem K.H., Khan M.I. “Surface characteristics optimization of biocompatible Ti6Al4V with RCCD and NSGA II using die sinking EDM”, Journal of Materials Research and Technology Research Papers, Elsevier, ISSN NO. 2214-0697, Department - ME

28. Aditya Powari and Dharmendra Sadhwani “Extremely Accurate, Generic and Tractable Exponential Bounds for the Gaussian Q Function with Applications in Communication Systems”, IEEE Communications Letters Research Papers, IEEE, ISSN NO. 1089-7798, Department - ECE

29. Jayswal S., Mungule M. “Microstructure evolution and strength development for pozzolana blended cement mortar”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - CE

30. Sutar A.A., Rotte V.M. “Performance evaluation of one dimensional electrokinetic barrier subjected to saltwater intrusion: A laboratory scale study”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - CE

31. P Patel, E Patel, K Patel, M Mungule “Assessing the role of polypropylene fibres on tensile strength of alccofine and silicafume blended high strength concrete”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - CE

32. P Limbachiya, F Tamakuwala, R Yadav, DK Gupta “Recycling of mobile phones in India: challenges and barrier for the industries”, International Journal of Environment and Waste Management Research Papers, InderScience, ISSN NO. 1478-9876, Department - ME

33. D Deb, VE Balas, M Kaushik “Special Issue “Active Flow Control Processes with Machine Learning and the Internet of Things”, Processes  Research Papers, MDPI, ISSN NO. 2227-9717, Department - ECE

34. Y Shi, Q Cheng, A Alizadeh, H Yan, G Choubey “Influence of lateral single jets for thermal protection of reentry nose cone with multi-row disk spike at hypersonic flow: computational study”, Scientific Reports Research Papers, Nature, ISSN NO. 2045-2322, Department - ME

35. Patil M., Wanare R., Dalal P.H., Iyer K.K.R., Dave T.N. “A study on utilization of landfill mined soil like fraction for sustainable reduction in swelling and cracking potential for expansive and marine soils”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - CE

36. Dikshit, Mithilesh K., Vimal K. Pathak, Reeya Agrawal, Kuldeep K. Saxena, Dharam Buddhi, and Vinayak Malik “Experimental Study On The Surface Roughness And Optimization Of Cutting Parameters In The Hard Turning Using Biocompatible Tialn-Coated And Uncoated Carbide Inserts”, Surface Review and Letters Research Papers, World Scientific, ISSN NO. 1793-6667, Department - ME

37. K Kumar, P Kumar, V Kshirsagar, R Bhalerao, K Shah, P Vaidhya and S Panda “A Real-Time Object Counting and Collecting Device for Industrial Automation Process using Machine Vision”, IEEE Sensors Journal Research Papers, IEEE, ISSN NO. 1558-1748, Department - ECE

38. I Watitula Longkumer “Archiving Memories of Wartime through Storytelling: A Reading of Temsula Aos "An Old Man Remembers"”, Indian Literature: Sahitya Akademi Journal Research Papers, Sahitya Akademi, ISSN NO. 0019-5804 , Department - HSS

39. R Kumar, A Shah, R Tandon, M Suthar, KKR Iyer, M.Mungule “A study on the role of metakaolin and alccofine as supplementary materials on strength properties of concrete”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - CE

40. N Chaudhary, MK Dikshit “Study of the cross-linking density effect on the mechanical properties of h-BNNS reinforced epoxy nanocomposite part-1: a molecular dynamics simulation”, Journal of Molecular Modeling Research Papers, Springer, ISSN NO. 0948-5023, Department - ME

41. Makhesana M.A., Patel K.M., Krolczyk G.M., Danish M., Singla A.K., Khanna N. “Influence of MoS2 and graphite-reinforced nanofluid-MQL on surface roughness, tool wear, cutting temperature and microhardness in machining of Inconel 625”, CIRP Journal of Manufacturing Science and Technology Research Papers, Elsevier, ISSN NO. 1878-0016, Department - ME

42. Ramkumar P.L., Gupta N., Sangani V. “Experimental Investigation on Underlying Mechanism of LLDPE Based Rotationally Molded BioComposites”, Journal of Natural Fibers Research Papers, T&F, ISSN NO. 1544-046X, Department - ME

43. Salvi H., Vesuwala H., Raval P., Badheka V., Khanna N. “Sustainability analysis of additive + subtractive manufacturing processes for Inconel 625”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

44. R. Reddy, K. Shah and M. Kallamadi “Towards Unique Circuit Synthesis of Power Transformer Winding Using Gradient and Population Based Methods”, IEEE Latin America Transactions Research Papers, IEEE, ISSN NO. 1548-0992, Department - ECE

45. Supriya Mahida, Yogesh U. Shah, Sangita Sharma, and Prakash Mehta “A review on polymers additives in flexible pavement ”, Journal of Materials Science Research Papers, Springer, ISSN NO. 1573-4803, Department - CE

46. S Kumari, D Bandhu, A Muchhadiya, K Abhishek “Recent trends in parametric influence and microstructural analysis of friction stir welding for polymer composites”, Advances in Materials and Processing Technologies Research Papers, T&F, ISSN NO. 2374-0698, Department - ME

47. M Sharma, RK Patel, A Garg, RS Tan, UR Acharya “Automated detection of schizophrenia using deep learning: a review for the last decade”, Physiological Measurement Research Papers, IOP Science, ISSN NO. 0967-3334, Department - ECE

48. V Kshirsagar, RH Bhalerao, M Chaturvedi “Modified YOLO Module for Efficient Object Tracking in a Video”, IEEE Latin America Transactions Research Papers, IEEE, ISSN NO. 1548-0992, Department - ECE

49. Hegab H., Khanna N., Monib N., Salem A. “Design for sustainable additive manufacturing: A review”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

50. Sirin S., Akincioglu S., Gupta M.K., Kivak T., Khanna N. “A tribological performance of vegetable-based oil combined with GNPs and hBN nanoparticles on the friction-wear tests of titanium grade 2”, Tribology International Research Papers, Elsevier, ISSN NO. 0301679X, Department - ME

51. Sharma M., Lodhi H., Yadav R., Elphick H., Acharya U.R. “Computerized detection of cyclic alternating patterns of sleep: A new paradigm, future scope and challenges”, Computer Methods and Programs in Biomedicine Research Papers, PubMed, ISSN NO. 0169-2607, Department - ECE

52. Punit Bhanwar, Sandeep Reddy Trudeep N. Dave “A spreadsheet-based decision support system for selection of optimal soil liquefaction mitigation technique”, Decision Analytics Journal Research Papers, Elsevier, ISSN NO. 2772-6622, Department - CE

53. Parth Sathavara, Ajit Kumar Parwani, Paritosh Chaudhuri “Functional estimation of space and time varying thermal properties using modified conjugate gradient method”, International Journal of Thermal Sciences Research Papers, Elsevier, ISSN NO. 1778-4166, Department - ME

54. Roy S., Du J., Manohar E.M., Aziz T., Pal T.K., Sun L., Ahmed N., Das S. “Syntheses, Structures, and Magnetic Properties of Novel [3×1 + 2×1] Pentanuclear Zinc(II)-Lanthanide(III) Cocrystal Complexes: Slow Magnetic Relaxation Behavior of the Dy(III) Analogue”, Crystal Growth and Design Research Papers, ACS, ISSN NO. 1528-7483, Department - BS

55. Faniband, M., Jadhav, P., & Marulkar, K. “Impact of Firm Performance on Stock Returns: Evidence from Large-Cap, Mid-Cap and Small-Cap Stocks ”, Indian Journal of Finance and Banking Research Papers, CRIBFB, ISSN NO. 2574-609X, Department - HSS

56. PJ Patil, P Jadhav, J Chakradhar “Changing Pattern of Agricultural Exports: Evidence From India”, Dogo Rangsang Research Journal Research Papers, Guwahati University, ISSN NO.  2347-7180, Department - BS

57. Bagga P.J., Patel K.M., Makhesana M.A., Şirin Ş., Khanna N., Krolczyk G.M., Pala A.D., Chauhan K.C. “Machine vision-based gradient-boosted tree and support vector regression for tool life prediction in turning”, International Journal of Advanced Manufacturing Technology Research Papers, Springer, ISSN NO. 1433-3015, Department - ME

58. Dakhale B.J., Sharma M., Arif M., Asthana K., Bhurane A.A., Kothari A.G., Rajendra Acharya U. “An automatic sleep-scoring system in elderly women with osteoporosis fractures using frequency localized finite orthogonal quadrature Fejer Korovkin kernels”, Medical Engineering and Physics Research Papers, Elsevier, ISSN NO. 1350-4533, Department - ECE

59. Singh M., Kumari S., Biswas A., Abhishek K. “Influence of advanced coated tools on surface integrity characteristics of Nimonic C263”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - ME

60. M Pandey, N Tsunoji, R Bandyopadhyay, S Das, M Bandyopadhyay “Ni4 complex encapsulated hybrid Na–Y catalyst: Structural investigation and enhanced Catalysis”, Hybrid Advances Research Papers, Elsevier, ISSN NO. 2773-207X, Department - BS

61. M Sharma, P Makwana, RS Chad, UR Acharya “A novel automated robust dual-channel EEG-based sleep scoring system using optimal half-band pair linear-phase biorthogonal wavelet filter bank”, Applied Intelligence Research Papers, Springer, ISSN NO. 1573-7497, Department - ECE

62. Manvi Kaushik and Mohit Kumar “An integrated approach of intuitionistic fuzzy fault tree and Bayesian network analysis applicable to risk analysis of ship mooring operations”, Ocean Engineering Research Papers, Elsevier, ISSN NO. 1873-5258, Department - BS

63. M. Pandey, P. Shukla, A. Manhas, S. Kediya, N. Tsunoji, R. Kumar, S.S. Harmalkar, S. Das, M. Bandyopadhyay “Synthesis and characterization of novel binuclear zinc complex, immobilization in nano-porous support, and its catalytic application”, Molecular Catalysis Research Papers, Elsevier, ISSN NO. 2468-8231, Department - BS

64. Sharma M., Goyal D.K., Bansal A., Singla A.K., Grover N.K., Gupta M.K., Khanna N. “Investigations on erosion performance of carbon fiber–epoxy-based composite adhesion on 16Cr5Ni steel”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering Research Papers, Sage, ISSN NO. 2041-3009, Department - ME

65. Roy S., Du J., Manohar E.M., Sun L., Ahmed N., Dey A., Das S. “Mononuclear Lanthanide Complexes in Triangular Dodecahedron Geometry: Manifestation of Single Ion Magnet Behavior for DyIII Analogue”, Crystal Growth and Design Research Papers, ACS, ISSN NO. 1528-7505, Department - BS

66. Bhatt K., Shah J. “Reckoning Level of Risk and Severity (LORS) Based on the Gap Acceptance at a Three-Legged Uncontrolled Intersection of a Rural Highway”, Communications - Scientific Letters of the University of Žilina Research Papers, , ISSN NO. 1335-4205, Department - CE

67. Bhojani A.K., Kagdada H.L., Singh D.K. “First-principles investigation on structural and optoelectronic properties of buckled SnO monolayer for effective solar energy scavenging”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - BS

68. Ajit Kumar, A.K. Ghosh “Regularization regression methods for aerodynamic parameter estimation from flight data”, Aircraft Engineering and Aerospace Technology Research Papers, Emerald insight, ISSN NO. 0002-2667, Department - ME

69. Perozzi G., Oudainia M.R., Sentouh C., Popieul J.-C., Rath J.J. “Driver Assisted Lane Keeping with Conflict Management Using Robust Sliding Mode Controller”, Sensors Research Papers, MDPI, ISSN NO. 1424-8220, Department - ME

70. Raushan H., Bansal A., Singh V., Singla A.K., Singla J., Omer A., Singh J., Goyal “Dry sliding and slurry abrasion behaviour of wire arc additive manufacturing – Cold metal transfer (WAAM-CMT) cladded inconel 625 on EN8 steel”, Tribology International  Research Papers, Elsevier, ISSN NO. 0301-679X, Department - ME

71. Leksycki K., Feldshtein E., Maruda R.W., Khanna N., Krolczyk G.M., Pruncu C.I. “Corrigendum to an insight into the effect surface morphology, processing, and lubricating conditions on tribological properties of Ti6Al4V and UHMWPE pairs, Tribol Int, vol. 170, June 2022, 107504”, Tribology International  Research Papers, Elsevier, ISSN NO. 0301-679X, Department - ME

72. N Dalwadi, D Deb, S Ozana “Dual Observer Based Adaptive Controller for Hybrid Drones”, Drones Research Papers, MDPI, ISSN NO. 2504-446X, Department - ECE

73. R Iranmanesh, A Alizadeh, M Faraji, G Choubey “Numerical investigation of compressible flow around nose cone with Multi-row disk and multi coolant jets”, Scientific Reports Research Papers, Nature, ISSN NO. 2045-2322, Department - ME

74. K Kumar, P Kumar, D Deb, ML Unguresan, V Muresan “Artificial Intelligence and Machine Learning Based Intervention in Medical Infrastructure: A Review and Future Trends”, Healthcare Research Papers, MDPI, ISSN NO. 2227-9032, Department - ECE

75. PL. Ramkumar, Nikita Gupta, and Vrushang Sangani “Experimental Investigation on Underlying Mechanism of LLDPE Based Rotationally MoldedBioComposites”, Journal of Natural Fibers Research Papers, T&F, ISSN NO. 1544-046X, Department - ME

76. Prasenjit Sarkhel, Mithilesh K. Dikshit, Vimal Kumar, Pathak, Kuldeep K. Saxena, C. Prakash, Dharam Buddhi “Robust deflection control and analysis of a fishing rod-type flexible robotic manipulator for collaborative robotics”, Robotics and Autonomous Systems Research Papers, Elsevier, ISSN NO. 1872-793X, Department - ME

77. Dak G., khanna N., Pandey C. “Study on narrow gap welding of martensitic grade P92 and austenitic grade AISI 304L SS steel for ultra-supercritical power plant application”, Archives of Civil and Mechanical Engineering Research Papers, Springer, ISSN NO. 1644-9665, Department - ME

78. G Choubey, M Solanki, T Bhatt, G Kshitij, D Yuvarajan “Numerical investigation on a typical scramjet combustor using cavity floor H2 fuel injection strategy”, Acta Astronautica Research Papers, Elsevier, ISSN NO. 0094-5765, Department - ME

79. Bhojani A.K., Kagdada H.L., Ahuja R., Singh D.K. “Carbon-based monochalcogenides for efficient solar and heat energy harvesting”, Applied Surface Science Research Papers, Elsevier, ISSN NO. 0169-4332, Department - BS

80. Makwana D., Pramod B. “Dry sliding wear and heat flux mapping of closed-cell Mg-2Zn-2Ca foam fabricated by stir casting route”, Materials Letters Research Papers, Elsevier, ISSN NO. 1873-4979, Department - ME

81. Singh D.K.; Singh S.; Singh P. “Nanomaterials: Advances and Applications”, Springer Book Chapters, , ISSN NO. 978-981-19-7963-7, Department - BS

82. Sharma V.K.; Shekhawat K.; Singh S.K. “On the Family of Generalized Topp-Leone Arcsin Distributions (Book: G Families of Probability Distributions: Theory and Practices)”, CRC Press Book Chapters, , ISSN NO. 978-100086035-1, Department - BS

83. M Sharma, M Arif, K Asthana “Automated IoT-based detection of periodic leg movement using optimal wavelet-based entropy features (Chp.-14)”, Internet of Things in Biomedical Sciences: Challenges and applications Book Chapters, , ISSN NO. 978-0-7503-5311-3, Department - ECS

84. Shah, S., Parwani, A.K. “Estimation of Emissivity of the Surface Using Jaya Algorithm (Book: Recent Advances in Thermal Sciences and Engineering)”, Lecture Notes in Mechanical Engineering (Springer) Book Chapters, , ISSN NO. 978-981-19-7213-3, Department - ME

85. Upadhyay N.; Tripathi S.; Kushwaha A.; Bhasney S.M.; Mishra M. “Renewable bio-based materials: A journey towards the development of sustainable ecosystem”, Bio-Based Materials and Waste for Energy Generation and Resource Management: Present and Emerging Waste Management Practices: Volume 5 of Advanced Zero Waste Tools Book Chapters, , ISSN NO. 978-0-323-91149-8, Department - ME

86. Mohammad Yazdi, Sohag Kabir, Mohit Kumar, Ibrahim Ghafir, and Farhana Islam “Reliability Analysis of Process Systems Using Intuitionistic Fuzzy Set Theory (Book Title: Advances in Reliability, Failure and Risk Analysis)”, Industrial and Applied Mathematics, Springer Book Chapters, , ISSN NO. 978-981-19-9909-3, Department - BS

87. Dikshit M.K., Pathak V.K., Puri A.B., Davim J.P., Davim J.P. “Futuristic Manufacturing: Perpetual Advancement and Research Challenges”, CRC Press Book Chapters, , ISSN NO. 9781000852127, Department - ME

88. Nihal Dalwadi, Dipankar Deb, Stepan Ozana “Adaptive Hybrid Control of Quadrotor Drones”, Studies in Systems, Decision and Control (Springer) Book Chapters, , ISSN NO. 978-981-19-9744-0, Department - ECS

89. Dalwadi N., Deb D., Ozana S. “Anti-Swing Control Structure for the Biplane Quadrotor with Slung Load (Book Title: Adaptive Hybrid Control of Quadrotor Drones)”, Studies in Systems, Decision and Control Book Chapters, , ISSN NO. 978-981-19-9744-0, Department - ECS

90. Dalwadi N., Deb D., Ozana S. “Multi-observer Based Adaptive Controller for Hybrid UAV (Book Title: Adaptive Hybrid Control of Quadrotor Drones)”, Studies in Systems, Decision and Control Book Chapters, , ISSN NO. 978-981-19-9744-0, Department - ECS

91. Dalwadi N., Deb D., Ozana S. “Epilogue (Book Title: Adaptive Hybrid Control of Quadrotor Drones)”, Studies in Systems, Decision and Control Book Chapters, , ISSN NO. 978-981-19-9744-0, Department - ECS

92. Dalwadi N., Deb D., Ozana S. “Nonlinear Controllers for Hybrid UAV: Biplane Quadrotor (Book Title: Adaptive Hybrid Control of Quadrotor Drones)”, Studies in Systems, Decision and Control Book Chapters, , ISSN NO. 978-981-19-9744-0, Department - ECS

93. Dalwadi N., Deb D., Ozana S. “Deflecting Surface-Based Total Rotor Failure Compensation for Biplane Quadrotor (Book Title: Adaptive Hybrid Control of Quadrotor Drones)”, Studies in Systems, Decision and Control Book Chapters, , ISSN NO. 978-981-19-9744-0, Department - ECS

94. Dalwadi N., Deb D., Ozana S. “Partial Rotor Failure Compensation for Biplane Quadrotor with Slung Load (Book Title: Adaptive Hybrid Control of Quadrotor Drones)”, Studies in Systems, Decision and Control Book Chapters, , ISSN NO. 978-981-19-9744-0, Department - ECS

95. Dalwadi N., Deb D., Ozana S. “Nonlinear Disturbance Observer-Based Backstepping Control of Tail-Sitter Quadrotors (Book Title: Adaptive Hybrid Control of Quadrotor Drones)”, Studies in Systems, Decision and Control Book Chapters, , ISSN NO. 978-981-19-9744-0, Department - ECS

96. Dalwadi N., Deb D., Ozana S. “Adaptive Controller Design for Biplane Quadrotor (Book Title: Adaptive Hybrid Control of Quadrotor Drones)”, Studies in Systems, Decision and Control Book Chapters, , ISSN NO. 978-981-19-9744-0, Department - ECS

97. Shah D., Rashid R.A.R., Jamil M., Pervaiz S., Gajrani K.K., Rahman M.A., Khanna N. “Cryogenic assisted drilling of Ti-6Al-4V: An industry-supported study (Book Title: Sustainable Materials and Manufacturing Technologies)”, CRC Press Book Chapters, , ISSN NO. 9781003291961, Department - ME

98. Singh V., Bansal A., Singla A.K., Goyal D.K., Rampal, Khanna N. “Modification of SS316 steel with the assistance of high velocity oxy fuel (HVOF) process to upsurge its sustainability (Book Title: Sustainable Materials and Manufacturing Technologies)”, CRC Press Book Chapters, , ISSN NO. 9781003291961, Department - ME

99. Lahari N., Khanna N., Gajrani K.K. “Energy and economic assessment of machining Ti-6Al-4V in cryo-MQL environment (Book Title: Sustainable Materials and Manufacturing Technologies)”, CRC Press Book Chapters, , ISSN NO. 9781003291961, Department - ME

100. Navneet Khanna, Kishor Kumar Gajrani, Khaled Giasin, J. Paulo Davim “Sustainable Materials and Manufacturing Technologies”, CRC Press Book Chapters, , ISSN NO. 9781003291961, Department - ME

101. R. Prajapati, D. Jadav, P. Paredi, R. Bandyopadhyay, M. Bandyopadhyay “Acid- and alkali-treated hierarchical silicoaluminophosphate molecular sieves for sustainable industrial applications (Book Title: Sustainable Materials and Manufacturing Technologies)”, CRC Press Book Chapters, , ISSN NO. 9781003291961, Department - BS

102. Vineet Gupta, Garima Madaan Dua, and Pravin Jadhav “Awakening the might of heaven: Contextualization of religious values, social identity, and purchase intention in selected nations”, Religion and Consumer Behaviour Influence of Religiosity and Culture on Consumption, Routledge Book Chapters, , ISSN NO. 9781003288558, Department - HSS

103. Kagdada H.L.; Bhojani A.K.; Singh D.K. “An Overview of Nanomaterials: History, Fundamentals, and Applications (Book: Nanomaterials: Advances and Applications)”, Springer Book Chapters, , ISSN NO. 978-981-19-7963-7, Department - BS

104. Joshi N.; Pandey D.K.; Mistry B.G.; Singh D.K. “Metal Oxide Nanoparticles: Synthesis, Properties, Characterization, and Applications (Book: Nanomaterials: Advances and Applications)”, Springer Book Chapters, , ISSN NO. 978-981-19-7962-0, Department - BS

105. Mohit Kumar “Chapter 10 - An α-cut interval-based similarity aggregation method to evaluate fault tree events for system safety under fuzzy environment”, Engineering Reliability and Risk Assessment: A volume in Advances in Reliability Science (Elsevier) Book Chapters, , ISSN NO. 978-0-323-91943-2, Department - BS

106. Bhingole Pramod P., Ulkesh B. Desai, Sunkulp Goel “Advances in Material Science and Metallurgy”, Lecture Notes in Mechanical Engineering, Springer Book Chapters, , ISSN NO. 978-981-19-4918-0, Department - ME

107. V Rawat, V Shrimali, A Jain, A Rawat “Detection of Fetal Abnormality Using ANN Techniques (Book Title: Biomedical Signal and Image Processing with Artificial Intelligence)”, EAI/Springer Innovations in Communication and Computing (EAISICC), Springer Book Chapters, , ISSN NO. 978-3-031-15816-2, Department - ECS

108. Mithilesh K. Dikshit, Ashish Soni, J. Paulo Davim “Advances in Manufacturing Engineering Select Proceedings of ICFAMMT 2022”, Lecture Notes in Mechanical Engineering, Springer Book Chapters, , ISSN NO. 978-981-19-4208-2, Department - ME

109. K Makwana, K Parmar, AK Parwani, S Tripathi “Parametric current trends on pulsating heat pipes–A review”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ME

110. P Rajput, M Chaturvedi, V Patel “Design and implementation of advanced public transportation system for developing countries”, AIP Conference Proceedings Conference Paper, AIP, ISSN NO. 1551-7616, Department - ECS

111. Khushbu Bhatt, Jiten Shah “A Statistical Approach to Estimate Gap Acceptance Parameter at Three-Legged Uncontrolled Intersection”, TPMDC 2022: Transportation Research Conference Paper, Springer, ISSN NO. 978-981-99-6089-7, Department - CE

112. A Modi, N Joshi, AK Mehta “Formation of Quadcopter Swarm Using Distributed Exponential Discrete-Time Sliding Mode Protocol”, IECON 2023-49th Annual Conference of the IEEE Industrial Electronics Society Conference Paper, IEEE, ISSN NO. 979-8-3503-3182-0, Department - ECS

113. Kumar Abhishek , Pusuluri Harish Babu, Deepika Arora, Meenakshi, Hazim Y. Saeed, Sorabh Lakhanpal “Exploring the Microstructural and Mechanical Properties of Next-Generation Super Alloys”, 15th International Conference on Materials Processing and Characterization (ICMPC 2023) Conference Paper, E3S Web Conf. EDP Sciences, ISSN NO. 2267-1242, Department - ME

114. Kumar Abhishek, B. Anupama, Harjeet Singh, Nisha Gupta, Muthana Saleh Mashkour and Lavish Kansal “Super Alloy Coatings for Enhanced Corrosion and Oxidation Resistance in Extreme Environments”, 15th International Conference on Materials Processing and Characterization (ICMPC 2023) Conference Paper, E3S Web Conf. EDP Sciences, ISSN NO. 2267-1242, Department - ME

115. Srinivas C.M.V.; Jaglan S.; Savitha H.S.; Ghamande M.V.; Trivedi P.U.; Ramakrishnan R. “Integrating Smart Technologies for Enhanced Traffic Management and Road Safety: A Data-Driven Approach”, Proceedings of the 2023 2nd International Conference on Augmented Intelligence and Sustainable Systems, ICAISS 2023 Conference Paper, IEEE, ISSN NO. 979-8-3503-2579-9, Department - CE

116. Mehta D.; Verma P.; Rawat A. “Data Analysis of U-blox GPS on Static and Dynamic Drone Platform”, 2nd International Conference on Wireless, Antenna and Microwave Symposium, WAMS 2023 Conference Paper, IEEE, ISSN NO. 979-8-3503-1243-0, Department - ECS

117. S Verma, AH Singh, K Bhargava “Computational Analysis of Perovskite Based Standalone Solar PV System”, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET) Conference Paper, IEEE, ISSN NO. 979-8-3503-1997-2, Department - ECS

118. J Rana, MK Dikshit “Recent advancements in materials for battery thermal management systems in Li-ion battery: A mini review”, Materials Today: Proceedings  Conference Paper, Elsevier, ISSN NO. 2214-7853, Department - ME

119. R Ganesh, BS Rao, S Goriparthi, PU Trivedi, N Nishant et al. “An Efficient Method for Smart Parking System Using Adaptive CNN Ensemble Approach”, 2023 5th International Conference on Inventive Research in Computing Applications (ICIRCA) Conference Paper, IEEE, ISSN NO. 979-8-3503-2142-5, Department - CE

120. Sharma S.; Singh A.; Kumar R.; Mehta A. “Analysis of Land Surface Temperature at 10-meter Pixel size (Spatial Resolution) for Ahmedabad City”, 2023 International Conference on Computational Intelligence and Sustainable Engineering Solutions (CISES) Conference Paper, IEEE, ISSN NO. 979-8-3503-2391-7, Department - CE

121. Umanesan R.; Nagabhushana Rao M.; Bhavana S.; Walid M.A.A.; Trivedi P.U.; Naresh Kumar Reddy P. “Innovative Method for Predicting Vehicle Speed Detection using Fuzzy Local Information Means and CNN”, 2023 International Conference on Sustainable Computing and Smart Systems (ICSCSS) Conference Paper, IEEE, ISSN NO. 979-8-3503-3360-2, Department - CE

122. Motiyani H.; Sameed Q.; Mali P.K.; Mehta A. “Clustering of Hyperspectral Images using Entropy based Multiple Features (Bands) Set Selection”, 2023 International Conference on Computational Intelligence and Sustainable Engineering Solutions (CISES) Conference Paper, IEEE, ISSN NO. 979-8-3503-2391-7, Department - CE

123. Dalal, P. H., Wanare, R., Patil, M., Reddy, A. S., Dave, T. N., & Iyer, K. K. R. “Water stability test: A tool to assess resilience of geotechnical structures to flooding and water inundation ”, Coalition for Disaster Resilient Infrastructure (CDRI) 2022 Conference Proceedings Conference Paper, Sustainable and Resilient Infrastructure, ISSN NO. 2378-9689, Department - CE

124. S Bapodara, S Mesvani, M Chaturvedi, P Rajput “Traffic Congestion and Emergency Vehicle Responsive Traffic Signal Control in Resource Constrained Environment”, 2023 11th International Symposium on Electronic Systems Devices and Computing (ESDC) Conference Paper, IEEE, ISSN NO. 978-1-6654-5572-5, Department - ECS

125. ID Pharne, SV Patil, AD Rana, K Bhargava “Quantified Analysis of Highly Efficient Halide Perovskite Solar Cell”, 2023 IEEE 8th International Conference for Convergence in Technology (I2CT) Conference Paper, IEEE, ISSN NO. 979-8-3503-3401-2, Department - ECS

126. Prashant Kumar Mali, Hitenkumar Motiyani, Quazi Sameed and Anand Mehta “Hyper spectral Image Clustering and Local Feature Selection using Gini Impurity.”, 2023 7th International Conference on Trends in Electronics and Informatics (ICOEI) Conference Paper, IEEE, ISSN NO. 979-8-3503-9728-4, Department - CE

127. Prajapat R., Yadav R.N. “Profit Maximization for Resource Providers Using Dynamic Programming in Edge Computing”, Advanced Information Networking and Applications Conference Paper, Lecture Notes in Networks and Systems, Springer, ISSN NO. 978-3-031-28451-9, Department - ECS

128. K. Manjunath and V. Pandya “Single-loop control of grid-tied synchronverter for the desired power injection”, 2022 IEEE International Power and Renewable Energy Conference (IPRECON) Conference Paper, IEEE, ISSN NO. 978-1-6654-9175-4, Department - ECS

129. S. K. M. Shaikh and Manjunath. K “An empirical study of PMU data based power system event detection techniques”, 2023 5th International Conference on Power, Control & Embedded Systems (ICPCES) Conference Paper, IEEE, ISSN NO. 2643-864X, Department - ECS

130. Patel K., Patel P., Ghodasara T., Tripathi S. “A Review on Different Mechanisms Used in Power Generation Through Speed Bumps”, Advances in Material Science and Metallurgy Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-981-19-4918-0, Department - ME

131. Pandya A., Shah M., Pramod B., Srivastava N. “A Review on Heat Treatment of Magnesium Alloys and Its Effect on Various Properties”, Advances in Material Science and Metallurgy Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-981-19-4918-0, Department - ME

132. V Bhonde, M Fadadu, S Patel, M Mungule, KKR Iyer “A comparison of stress-strain behaviour of conventional and high strength concrete”, Proceedings of the 12th Structural Engineering Convention (SEC 2022), NCDMM, MNIT Jaipur Conference Paper, Alwaha Scientific Publishing Services, ASPS, ISSN NO. 2830-909X, Department - CE

133. Hitenkumar Motiyani, Prashant Kumar Mali, and Anand Mehta “Hyperspectral Image Segmentation, Feature Reduction and Clustering using k-means”, 2022 International Conference on Computing, Communication, and Intelligent Systems (ICCCIS-2022) Conference Paper, IEEE, ISSN NO. 978-1-6654-6200-6, Department - CE

134. SR George, AK Verma, BR Dalwadi, KKR Iyer “A Parametric Study on Effect of Wave Height, Water Depth and Support Conditions on Behaviour of Offshore Jacket Structure”, Proceedings of the 12th Structural Engineering Convention (SEC 2022), NCDMM, MNIT Jaipur Conference Paper, Alwaha Scientific Publishing Services, ASPS, ISSN NO. 2830-909X, Department - CE

135. M Vyas, G Anand, RN Yadav, SK Nayak “DASA: An Efficient Data Aggregation Algorithm for LoRa Enabled Fog Layer in Smart Agriculture”, Advanced Information Networking and Applications, AINA 2023 ( Vol 654) Conference Paper, Lecture Notes in Networks and Systems, Springer, ISSN NO. 978-3-031-28451-9, Department - ECS

136. Shah M., Pandya A., Pramod B., Srivastava N. “Processing Techniques of Magnesium Matrix Composites and Its Heat Treatment—A Review”, Advances in Material Science and Metallurgy Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-981-19-4918-0, Department - ME

137. A Pandya, M Shah, B Pramod, N Srivastava “A Review on Heat Treatment of Magnesium Alloys and Its Effect on Various Properties”, Advances in Material Science and Metallurgy Select Proceedings of ICFAMMT 2022 Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-981-19-4918-0, Department - ME

138. BK Swargam, RN Yadav, M Chaturvedi “Two Level Wi-Fi Fingerprinting based Indoor Localization using Machine Learning”, ICDCN 23: Proceedings of the 24th International Conference on Distributed Computing and Networking Conference Paper, acM Digital Library, ISSN NO. 978-1-4503-9796-4, Department - ECS

139. M Shah, A Pandya, B Pramod, N Srivastava “Processing Techniques of Magnesium Matrix Composites and Its Heat Treatment—A Review”, Advances in Material Science and Metallurgy Select Proceedings of ICFAMMT 2022 Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-981-19-4918-0, Department - ME

140. K Patel, P Patel, T Ghodasara, S Tripathi “A Review on Different Mechanisms Used in Power Generation Through Speed Bumps”, Advances in Material Science and Metallurgy Select Proceedings of ICFAMMT 2022 Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-981-19-4918-0, Department - ME

141. S Teli, P Kundhani, V Choksi, KKR Iyer “Effect of Seismic Analysis Approach and Provision of Shear Walls on Parameters for Raft Foundation Design”, Proceedings of the 12th Structural Engineering Convention (SEC 2022), NCDMM, MNIT Jaipur Conference Paper, Alwaha Scientific Publishing Services, ASPS, ISSN NO. 2830-909X, Department - CE

142. Yıldırım Ç.V.; Sirin; Dağlı S.; Salvi H.; Khanna N. “Analysis of machinability and sustainability aspects while machining Hastelloy C4 under sustainable cutting conditions”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

143. Ramkumar P.L.; Rupareliya T.; Jasani S. “Processability investigation on underlying mechanism of LLDPE-based rotationally moulded banana fibre biocomposites”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering Research Papers, Sage, ISSN NO. 0954-4089, Department - ME

144. Faniband, M., & Jadhav, P. “Do large cap, mid cap and small cap firms stock liquidity react to macroeconomic and nonmacroeconomic factors alike? A New Indian experience”, JIMS 8M The Journal of Indian Management And Strategy Research Papers, , ISSN NO. 0973-9335, Department - HSS

145. MK Dikshit, R Srinivas, S Panchal, M Agrawal, A Verma “Experimental investigation on the mechanical properties of resistance seam welding of thin sheet”, Journal of Adhesion Science and Technology  Research Papers, T&F, ISSN NO. 0169-4243, Department - ME

146. Hossam E Glida, Chouki Sentouh, Jagat Jyoti Rath “Optimal Model-Free Finite-Time Control Based on Terminal Sliding Mode for a Coaxial Rotor”, Drones Research Papers, MDPI, ISSN NO. 2504-446X, Department - ME

147. Sharma M.; Anand D.; Verma S.; Acharya U.R. “Automated insomnia detection using wavelet scattering network technique with single-channel EEG signals”, Engineering Applications of Artificial Intelligence Research Papers, Elsevier, ISSN NO. 0952-1976, Department - ME

148. Wadichar A.; Murarka S.; Shah D.; Bhurane A.; Sharma M.; Mir H.S.; Acharya U.R. “A Hierarchical Approach for the Diagnosis of Sleep Disorders Using Convolutional Recurrent Neural Network”, IEEE Access Research Papers, IEEE, ISSN NO. 2169-3536, Department - ECE

149. Koshti H.; Bandyopadhyay M.; Bandyopadhyay R. “Micro-Mesoporous Hierarchical Beta Zeolite and its Catalytic Application in Acetic Acid Benzylation”, ChemistrySelect Research Papers, ECSP, ISSN NO. 2365-6549, Department - BS

150. Koshti H.; Bandyopadhyay M.; Kumar M.; Tsunoji N.; Bandyopadhyay R. “Alkylation of Toluene to Mono-benzylated Toluene over Micro-mesoporous Zeolite: Effect of Post-synthetic Treatment and Catalytic Application”, European Journal of Inorganic Chemistry Research Papers, ECSP, ISSN NO. 1434-1948, Department - BS

151. Dikshit M.K.; Pathak V.K.; Bhavani B.; Agrawal M.K.; Malik V.; Saxena A. “Optimization of cutting forces in high-speed ball-end milling using fuzzy-based desirability function approach”, International Journal on Interactive Design and Manufacturing Research Papers, Springer, ISSN NO. 1955-2513, Department - ME

152. Sureja D.; Kumari S.; Kumar R.S.; Abhishek K.; Saxena A.; Abdullaev S.S. “Experimental analysis and optimization of MQL turning of nitinol 56 alloy: a comparative study of grey, utility, and TOPSIS methods”, International Journal on Interactive Design and Manufacturing Research Papers, Springer, ISSN NO. 1955-2505, Department - ME

153. Kumar M.; Kumar A.; Solanki D.; Mungule M. “Low molarity geopolymer concrete: Effects on compressive strength, elastic modulus, sorptivity and chloride migration”, Construction and Building Materials Research Papers, Elsevier, ISSN NO. 0950-0618, Department - CE

154. Jayabal R.; Soundararajan G.; Kumar R.A.; Choubey G.; Devarajan Y.; Raja T.; Kaliappan N. “Study of the effects of bio-silica nanoparticle additives on the performance, combustion, and emission characteristics of biodiesel produced from waste fat”, Scientific Reports Research Papers, Springer, ISSN NO. 2045-2322, Department - ME

155. Pimenov D.Y.; Kiran M.; Khanna N.; Pintaude G.; Vasco M.C.; da Silva L.R.R.; Giasin K. “Review of improvement of machinability and surface integrity in machining on aluminum alloys”, International Journal of Advanced Manufacturing Technology Research Papers, Springer, ISSN NO. 0268-3768, Department - ME

156. Maruda R.W.; Szczotkarz N.; Michalski M.; Arkusz K.; Wojciechowski S.; Niesłony P.; Khanna N.; Królczyk G.M. “Evaluation of tool wear during turning of Ti6Al4V alloy applying MQL technique with Cu nanoparticles diversified in terms of size”, Wear Research Papers, Elsevier, ISSN NO. 0043-1648, Department - ME

157. Pari J. Kundaliya, Sudhakar Chaudhary “Symmetric fractional order reduction method with ????1 scheme on graded mesh for time fractional nonlocal diffusion-wave equation of Kirchhoff type”, Computers and Mathematics with applications Research Papers, Elsevier, ISSN NO. 0898-1221, Department - BS

158. A Maji, T Deshamukhya, G Choubey “Numerical investigation and optimisation of flat plate solar collectors using two swarm-based metaheuristic algorithms”, Engineering Analysis with Boundary Elements Research Papers, Elsevier, ISSN NO. 0955-7997, Department - ME

159. Gautam Choubey, Malhar Solanki, Om Patel, Yuvarajan Devarajan, Wei Huang “Effect of different strut design on the mixing performance of H2 fueled two-strut based scramjet combustor”, Fuel Research Papers, Elsevier, ISSN NO. 0016-2361, Department - ME

160. M Sharma, H Lodhi, R Yadav, UR Acharya “Sleep disorder identification using wavelet scattering on ECG signals”, International Journal of Imaging Systems and Technology Research Papers, Wiley, ISSN NO. 0899-9457, Department - ECE

161. HH Gajjar, JD Jeyaraman “Assessment of different types of bricks in varying wall configurations in an indoor thermal environment for a semi-arid region”, Architectural Science Review Research Papers, T&F, ISSN NO. 0003-8628, Department - CE

162. Sharma M.; Anand D.; Verma S.; Acharya U.R. “Automated insomnia detection using wavelet scattering network technique with single-channel EEG signals”, Engineering Applications of Artificial Intelligence Research Papers, Elsevier, ISSN NO. 0952-1976, Department - ECE

163. AS Reddy, M Mungule, TN Dave, KKR Iyer “Evaluation of Interface Behaviour and Load-Settlement Characteristics of Geosynthetics-Reinforced Landfill Mined Soil like Fraction for Fill Applications”, International Journal of Geosynthetics and Ground Engineering Research Papers, Springer, ISSN NO. 2199-9279, Department - CE

164. D Chauhan, MA Makhesana, RA Rahman Rashid “Comparison of Machining Performance of Ti-6Al-4V under Dry and Cryogenic Techniques Based on Tool Wear, Surface Roughness, and Power Consumption”, Lubricants Research Papers, MDPI, ISSN NO. 2075-4442, Department - ME

165. Aditya Powari, Garv Anand and Dharmendra Sadhwani “Novel Range Wise Optimization of the Exponential Bounds on the Gaussian $Q$ Function and its Applications in Communications Theory”, IEEE Latin America Transactions Research Papers, IEEE, ISSN NO. 1548-0992, Department - ECE

166. Prajapati R.; Pandey M.; Tsunoji N.; Bandyopadhyay R.; Bandyopadhyay M. “Cyclo-addition of carbon dioxide to epoxides employing hierarchical silicoaluminophosphates molecular sieves”, Molecular Catalysis Research Papers, Elsevier, ISSN NO. 2468-8274, Department - BS

167. Priyank Trivedi, Jiten Shah, S. Moslem, F. Pilla “An application of the hybrid AHP-PROMETHEE approach to evaluate the severity of the factors influencing road accidents”, Heliyon Research Papers, Elsevier, ISSN NO. 2405-8440, Department - CE

168. M Pandey, S Shabuddhin, N Tsunoji, S Das, M Bandyopadhyay “Extraction of heavy metals from wastewater using amine-modified mesoporous silica”, Environmental Science and Pollution Research Research Papers, Springer, ISSN NO. 1614-7499, Department - BS

169. H. Sharma, N. Joshi “Estimation of Transverse Velocity and Concentration Profile Using Kumaraswamy Distribution”, Journal Stochastic Environmental Research and Risk Assessment Research Papers, Springer, ISSN NO. 1436-3240, Department - CE

170. N Dalwadi, D Deb, G Choubey, M Kaushik, DP Mishra “Virtual deflection with synthetic jet actuators at high angles of attack”, International Journal of Turbo & Jet-Engines Research Papers, De Gruyter, ISSN NO. 2191-0332, Department - ECE

171. CB Khatri, SK Yadav, GD Thakre, AK Rajput “Design optimization of vein-bionic textured hydrodynamic journal bearing using genetic algorithm”, Acta Mechanica Research Papers, Springer, ISSN NO. 0001-5970, Department - ME

172. Swami J.; Dixit A.; Tiwari B. “Impact of Cr-O hybridization in A CrO3(A = La, Y): A theoretical investigation”, Modern Physics Letters B Research Papers, World Scientific, ISSN NO. 0217-9849, Department - BS

173. Khanna N.; Kshitij G.; Kashyap N.; Rahman Rashid R.A.; Palanisamy S. “Machinability analysis for drilling Ti6Al4V ELI under sustainable techniques: EMQL vs LCO2”, Tribology International Research Papers, Elsevier, ISSN NO. 0301-679X, Department - ME

174. S Kumari, R Gupta, G Krishna, K Abhishek, N Alla and Kuldeep Kr. Saxena “Recent trends and research opportunities in hybrid additive manufacturing”, Innovation and Emerging Technologies Research Papers, World Scientific, ISSN NO. 2810-9007, Department - ME

175. S Kandaswamy, VM Swarupa, S Sur, G Choubey & et al. “Cashew nut shell oil as a potential feedstock for biodiesel production: An overview”, Biotechnology and Bioengineering Research Papers, Wiley, ISSN NO. 1097-0290, Department - ME

176. Rampal; Singla A.K.; Bansal A.; Singh V.; Khanna N.; Goyal D.K.; Singla J.; Tailor S. “Development, characterization, and cavitation erosion analysis of high velocity oxy-fuel (HVOF) sprayed TiC and (70Cu-30Ni)-Cr based composite coatings on SS316 steel”, Tribology International Research Papers, Elsevier, ISSN NO. 0301-679X, Department - ME

177. Rejesh Reddy, Krupa Shah, Manjunath K “Performance Evaluation of Laboratory and Industrial Equipment in FRA Measurement”, Iranian Journal of Science and Technology, Transactions of Electrical Engineering  Research Papers, Springer, ISSN NO. 2364-1827, Department - ECE

178. Dalwadi N.; Deb D.; Ozana S. “Performance evaluation of RW-Quadrotor and Bi-Quadrotor for payload delivery”, IET Intelligent Transport Systems Research Papers, Wiley, ISSN NO. 1751-956X, Department - ECE

179. PH Dalal, M Patil, KKR Iyer, TN Dave “Sustainable controlled low strength material from waste materials for infrastructure applications: State-of-the-art”, Journal of Environmental Management Research Papers, Elsevier, ISSN NO. 1095-8630, Department - CE

180. Maity S.R.; Tiwari B.; Rath M.; Rao M.S.R. “Composition-driven structural phase transition in ferroelectric PbZrxTi1-xO3 across the morphotropic phase boundary”, Journal of Solid State Chemistry Research Papers, Elsevier, ISSN NO. 0022-4596, Department - BS

181. Akash Modi, Nikita Joshi, Axaykumar Mehta “Robust discrete-time super twisting formation protocol for a 6-DOF Quadcopter swarm”, ISA Transactions Research Papers, Elsevier, ISSN NO. 0019-0578, Department - ECE

182. M Langhi, T Hosoda “Transition from undular jump to breaking jump”, Journal of Hydraulic Research Research Papers, T&F, ISSN NO. 0022-1686, Department - CE

183. Maheshwari P.; Khanna N.; Hegab H.; Singh G.; Sarıkaya M. “Comparative environmental impact assessment of additive-subtractive manufacturing processes for Inconel 625: A life cycle analysis”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

184. Khanna N.; Airao J.; Maheshwari P.; Nirala C.K.; Outeiro J. “Life cycle assessment to reduce environmental and carbon footprints of ultrasonic-assisted turning”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

185. Kumar K.; Gupta K.; Sharma M.; Bajaj V.; Rajendra Acharya U. “INSOMNet: Automated insomnia detection using scalogram and deep neural networks with ECG signals”, Medical Engineering & Physics Research Papers, Elsevier, ISSN NO. 1350-4533, Department - ECE

186. Sharma M.; Verma S.; Anand D.; Gadre V.M.; Acharya U.R. “CAPSCNet: A novel scattering network for automated identification of phasic cyclic alternating patterns of human sleep using multivariate EEG signals”, Computers in Biology and Medicine Research Papers, Elsevier, ISSN NO. 0010-4825, Department - ECE

187. S Liu, Z Lin, B Yan, W Huang, G Choubey “Wide-Speed Vehicle Control Considering Flight-Propulsion Coupling Constraints”, Journal of Aerospace Engineering Research Papers, ASCE, ISSN NO. 0893-1321, Department - ME

188. PA Dabhi, KB Solanki “Vector valued Beurling algebra analogues of Wieners Theorem”, Indian Journal of Pure and Applied Mathematics Research Papers, Springer, ISSN NO. 0019-5588, Department - BS

189. M Choudhuri, G Faraco, AK Yadav “On the distality and expansivity of certain maps on spheres”, Dynamical Systems Research Papers, T&F, ISSN NO. 1468-9367, Department - BS

190. Choubey G.; Patel O.; Solanki M.; Ingenito A.; Devarajan Y.; Tripathi S. “Influence of cavity floor injection strategy on mixing improvement study of a splitter plate-assisted supersonic combustor”, Engineering Analysis with Boundary Elements Research Papers, Elsevier, ISSN NO. 0955-7997, Department - ME

191. Khanna N.; Raval P.; Patel D.; Prajapati R.; Schoop J.; Gajrani K.K. “Assessment of additive and subtractive sustainable manufacturing of Inconel 625”, Tribology International Research Papers, Elsevier, ISSN NO. 0301-679X, Department - ME

192. S Kumari, K Abhishek, D Bandhu, Pardeep, BDY Sunil and M Gupta “Industrial and market opportunities in hybrid additive manufacturing”, Innovation and Emerging Technologies Research Papers, World Scientific, ISSN NO. 2810-9007, Department - ME

1. Makhesana M.A., Patel K.M., Khanna N. “Analysis of vegetable oil-based nano-lubricant technique for improving machinability of Inconel 690”, Journal of Manufacturing Processes Research Papers, Elsevier, ISSN NO. --, Department - ME

2. Moossa B., Trivedi P., Saleem H., Zaidi S.J. “Desalination in the GCC countries- a review”, Journal of Cleaner Production Research Papers, Elsevier, ISSN NO. --, Department - ME

3. Leksycki K., Feldshtein E., Maruda R.W., Khanna N., Królczyk G.M., Pruncu C.I. “An insight into the effect surface morphology, processing, and lubricating conditions on tribological properties of Ti6Al4V and UHMWPE pairs”, Tribology International Research Papers, Elsevier, ISSN NO. --, Department - ME

4. Choubey G., Gaud P., Mahmood Fatah A., Devarajan Y. “Numerical investigation on geometric sensitivity and flame stabilisation mechanism in H2 fueled two-strut based scramjet combustor”, Fuel Research Papers, Elsevier, ISSN NO. --, Department - ME

5. Sankhla A.M., Patel K.M., Makhesana M.A., Giasin K., Pimenov D.Y., Wojciechowski S., Khanna N. “Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder metallurgy route”, Journal of Materials Research and Technology Research Papers, Elsevier, ISSN NO. --, Department - ME

6. Agrawal C., Khanna N., Pimenov D.Y., Wojciechowski S., Giasin K., Sarıkaya M., Yıldırım Ç.V., Jamil M. “Experimental investigation on the effect of dry and multi-jet cryogenic cooling on the machinability and hole accuracy of CFRP composites”, Journal of Materials Research and Technology Research Papers, Elsevier, ISSN NO. --, Department - ME

7. Vaidya G., Munuswamy D.B., Devarajan Y., Choubey G., Nagappan B., Bibin C. “Detailed analysis on reducing wastage and exploiting the production process of bio-oil from in-edible and waste Sinapis arvensis seed oil”,  Research Papers, Elsevier, ISSN NO. --, Department - ME

8. Airao J., Nirala C.K., Bertolini R., Krolczyk G.M., Khanna N. “Sustainable cooling strategies to reduce tool wear, power consumption and surface roughness during ultrasonic assisted turning of Ti-6Al-4V”, Tribology International Research Papers, Elsevier, ISSN NO. --, Department - ME

9. Khanna N., Shah P., Sarikaya M., Pusavec F. “Energy consumption and ecological analysis of sustainable and conventional cutting fluid strategies in machining 15–5 PHSS”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. --, Department - ME

10. Devarajan Y., Munuswamy D.B., Nalla B.T., Choubey G., Mishra R., Vellaiyan S. “Experimental analysis of Sterculia foetida biodiesel and butanol blends as a renewable and eco-friendly fuel”, Industrial Crops and Products Research Papers, Elsevier, ISSN NO. --, Department - ME

11. Sharma M., Yadav A., Tiwari J., Karabatak M., Yildirim O., Acharya U.R. “An Automated Wavelet-Based Sleep Scoring Model Using EEG, EMG, and EOG Signals with More than 8000 Subjects”, International Journal of Environmental Research and Public Health Research Papers, MDPI, ISSN NO. 1660-4601, Department - ECE

12. Redekar A., Deb D., Ozana S. “Functionality Analysis of Electric Actuators in Renewable Energy Systems—A Review”, Sensors Research Papers, MDPI, ISSN NO. 1424-8220, Department - EE

13. M Lata, R Yadav, DK Gupta “Performance Evaluation of Modified Evaporative Cooler through Simulation and Experimental Investigation in Indian Context”, Heat Transfer Engineering Research Papers, Taylor & Francis, ISSN NO. 1521-0537, Department - ME

14. R Jani, K Bhargava “Efficiency and Reproducibility Enhancement in Perovskite Solar Cell With MoS 2 as Electron Transport Layer: A Computational Finding”, IEEE Transactions on Electron Devices Research Papers, IEEE, ISSN NO. 1557-9646, Department - EE

15. Kshitij Bhargava “Enhanced efficiency, durability and reproducibility of non-fullerene acceptor organic solar cell with NiO as hole transport material: A computational study”, International Journal of Energy Research Research Papers, Wiley, ISSN NO. 1099-114X, Department - EE

16. Rajesh Kumar, Mahuya Bandyopadhyay, Madhu Pandey, Nao Tsunoji “Amine-impregnated nanoarchitectonics of mesoporous silica for capturing dry and humid 400 ppm carbon dioxide: A comparative study”, Microporous and Mesoporous Material Research Papers, Elsevier, ISSN NO. 1387-1811, Department - BS

17. Priyank Trivedi, Jiten Shah “Identification of Road Crash Severity Ranking by Integrating the Multi-Criteria Decision-Making Approach”, Journal of Road Safety (JRS) Research Papers, --, ISSN NO. 2652-4252, Department - CE

18. AK Parwani, P Ramkumar, F de Monte “Selected Papers from the 3rd International Conference on Recent Advances in Mechanical Infrastructure (ICRAM-2021)”, Heat Transfer Engineering Research Papers, Taylor & Francis, ISSN NO. 1521-0537, Department - ME

19. Joshi D., Deb D., Muyeen S.M. “Comprehensive Review on Electric Propulsion System of Unmanned Aerial Vehicles”, Frontiers in Energy Research Research Papers, Frontiers, ISSN NO. 2296-598X, Department - ECE

20. Swara Joshi and Dr. Meera Vasani “Ecohes of Eco-Communities: A Cultural Study of Mavchi Community in Khandesh, Maharashtra”, ELT Voices, International Peer- Reviewed Journal for the Teachers of English Research Papers, , ISSN NO. , Department - HSS

21. Sharma M., Kumbhani D., Tiwari J., Kumar T.S., Acharya U.R. “Automated detection of obstructive sleep apnea in more than 8000 subjects using frequency optimized orthogonal wavelet filter bank with respiratory and oximetry signals”, Computers in Biology and Medicine Research Papers, Elsevier, ISSN NO. 0010-4825, Department - EE

22. Kanzariya D.B., Khan T.S., Das S., Lama P., Bandyopadhyay R., Pal T.K. “Highly regenerative, fast colorimetric response for organo-toxin and oxo-anions in an aqueous medium using a discrete luminescent Cd(ii) complex in a heterogeneous manner with theoretical revelation”, Dalton Transactions Research Papers, RSC, ISSN NO. 1477-9234, Department - BS

23. Pulkit Kumara, Ajit Kumar Parwani & Vivek Vitankar “Multiphase Computational Fluid Dynamics Simulation of Air and Fuel Reactors of Chemical Looping Combustion”, Heat Transfer Engineering Research Papers, Taylor & Francis, ISSN NO. 1521-0537, Department - ME

24. Patel N., Shukla P., Lama P., Das S., Pal T.K. “Engineering of Metal-Organic Frameworks as Ratiometric Sensors”, Crystal Growth & Design Research Papers, ACS, ISSN NO. 1528-7505, Department - BS

25. Sudhakar Chaudhary, Pari J. Kundaliya “L1 scheme on graded mesh for subdiffusion equation with nonlocal diffusion term”, Mathematics and Computers in Simulation Research Papers, Elsevier, ISSN NO. 0378-4754, Department - BS

26. S Shah, AK Parwani “Enhanced Conjugate Gradient Method for Heat Flux Estimation in Laminar and T-junction Turbulent Mixing Flow”, Heat Transfer Engineering Research Papers, Taylor & Francis, ISSN NO. 1521-0537, Department - ME

27. N Chaudhary, MK Dikshit “Molecular Dynamic Prediction of Elastic Modulus of h-BNNS Reinforced Al Metal Matrix Nanocomposite”, Composites: Mechanics, Computations, Applications: An International Journal Research Papers, Begell House, ISSN NO. 2152-2073, Department - ME

28. Rohit Prajapati, Divya Jadav, Madhu Pandey, Mahuya Bandyopadhyay et al. “Synthesis of hierarchical silicoaluminophosphate (SAPO) molecular sieves by post-synthetic modification and their catalytic application”, European Journal of Inorganic Chemistry Research Papers, Wiley, ISSN NO. 1099-0682, Department - BS

29. T. Deshamukhya & G. Choubey “Prospects of micro-hydropower plants in Northeast India: a brief review”, International Journal of Energy and Water Resources Research Papers, Springer, ISSN NO. 2522-0101, Department - ME

30. Khushbu Bhatt, Jiten Shah “An impact of gap acceptance on road safety: A critical systematic review”, Journal of Sustainable Development of Transport and Logistics Research Papers, --, ISSN NO. 2520-2979, Department - CE

31. Divya Jadav, Pooja Shukla, Rajib Bandyopadhyay, Plaban Jyoti Sarma, Ramesh Chandra Deka, Rajesh Kumar, Sourav Das, Nao Tsunoji, Mahuya Bandyopadhyay “Immobilization of Zn4 complex on functionalized Layered HUS-7: Synthesis, Structural Investigation and Catalytic Activity”, New Journal of Chemistry Research Papers, RSC, ISSN NO. 1369-9261, Department - BS

32. Rajput J.S., Sharma M., Kumar T.S., Acharya U.R. “Automated Detection of Hypertension Using Continuous Wavelet Transform and a Deep Neural Network with Ballistocardiography Signals”, International Journal of Environmental Research and Public Health Research Papers, MDPI, ISSN NO. 1660-4601, Department - EE

33. Kagdada H.L., Gupta S.K., Sahoo S., Singh D.K. “Mobility driven thermoelectric and optical properties of two-dimensional halide-based hybrid perovskites: impact of organic cation rotation”, Physical Chemistry Chemical Physics Research Papers, RSC, ISSN NO. 1463-9084, Department - BS

34. UH Mehta, DS Kaul, Hardik H. Gajjar, Jai D. Jeyaraman “Understanding the Sources of Heavy Metal Pollution in Ambient Air of Neighboring a Solid Waste Landfill Site”, Aerosol Science and Engineering Research Papers, Springer, ISSN NO. 2510-3768, Department - CE

35. Jogendra Kumar, Kumar Abhishek, Jinyang Xu, and Rajesh Kumar Verma “Experimental Investigation on Machine-Induced Damages during the Milling Test of Graphene/Carbon Incorporated Thermoset Polymer Nanocomposites”, Journal of Composites Science Research Papers, MDPI, ISSN NO. 2504-477X, Department - ME

36. D Bandhu, JJ Vora, S Das, A Thakur, S Kumari, K Abhishek “Experimental study on application of gas metal arc welding based regulated metal deposition technique for low alloy steel”, Materials and Manufacturing Processes Research Papers, Taylor & Francis, ISSN NO. 1532-2475, Department - ME

37. R Wanare, P Jayanthi, KKR Iyer “A study on cracking behavior of marine soil modified with ultrafine slag under cured and uncured conditions”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - CE

38. M Sharma, AA Bhurane, UR Acharya “An expert system for automated classification of phases in cyclic alternating patterns of sleep using optimal wavelet-based entropy features”, Expert Systems Research Papers, Wiley, ISSN NO. 1468-0394, Department - EE

39. Thangaraj T., Kaushik M., Deb D., Unguresan M., Muresan V. “Survey on Vortex Shedding Tabs as Supersonic Jet Control”, Frontiers in Physics Research Papers, Frontiers, ISSN NO. 2296-424X, Department - EE

40. Majumdar D., Frontera A., Gomila R.M., Das S., Bankura K. “Synthesis, spectroscopic findings and crystal engineering of Pb(II)-Salen coordination polymers, and supramolecular architectures engineered by shole/ spodium/tetrel bonds: A combined experimental and theoretical investigation”, RSC Advances Research Papers, RSC, ISSN NO. 2046-2069, Department - BS

41. N Dalwadi, D Deb, JJ Rath “Biplane Trajectory Tracking Using Hybrid Controller Based on Backstepping and Integral Terminal Sliding Mode Control”, Drones Research Papers, MDPI, ISSN NO. 2504-446X, Department - EE

42. Manvi Kaushik,Mohit Kumar “An application of fault tree analysis for computing the bounds on system failure probability through qualitative data in intuitionistic fuzzy environment”, Quality and Reliability Engineering International  Research Papers, Wiley, ISSN NO. 1099-1638, Department - BS

43. Nihal Dalwadi,Dipankar Deb,S. M. Muyeen “Adaptive backstepping controller design of quadrotor biplane for payload delivery”, IET Intelligent Transport Systems Research Papers, IET, ISSN NO. 1751-9578, Department - EE

44. Sharma M., Darji J., Thakrar M., Acharya U.R. “Automated identification of sleep disorders using wavelet-based features extracted from electrooculogram and electromyogram signals”, Computers in Biology and Medicine Research Papers, PubMed, ISSN NO. 1879-0534, Department - EE

45. Y Patel, D Deb “Machine Intelligent Hybrid Methods Based on Kalman Filter and Wavelet Transform for Short-Term Wind Speed Prediction”, Wind Research Papers, MDPI, ISSN NO. 2674-032X, Department - EE

46. Majumdar D., Tüzün B., Pal T.K., Das S., Bankura K. “Architectural View of Flexible Aliphatic –OH Group Coordinated Hemi-Directed Pb(II)-Salen Coordination Polymer: Synthesis, Crystal Structure, Spectroscopic Insights, Supramolecular Topographies, and DFT Perspective”, Journal of Inorganic and Organometallic Polymers and Materials Research Papers, Springer, ISSN NO. 1574-1451, Department - BS

47. Pulkit Kumar, Ajit Kumar Parwani & Mohammad Mehdi Rashidi “Mitigation of NOx and CO2 from diesel engine with EGR and carbon capture unit”, Journal of Thermal Analysis and Calorimetry Research Papers, Springer, ISSN NO. 1588-2926, Department - ME

48. P Sanchora, DK Pandey, HL Kagdada, Dheeraj K. Singh “Understanding the fundamental interaction mechanism of hazardous gases and imidazolium based ionic liquids for efficient gas adsorption ”, Chemical Engineering Science Research Papers, Elsevier, ISSN NO. 0009-2509, Department - BS

49. Aditya Powari, Dharmendra Sadhwani, Lalita Gupta and Ram Narayan Yadav “Optimization of the Exponential Bounds on the Gaussian Q Function using Interior Point Algorithm and its Application in Communication Theory”, IEEE Open Journal of the Communications Society Research Papers, IEEE, ISSN NO. 2644-125X, Department - EE

50. A. Bisht, K. Ravani, Manish Chaturvedi, N. Kumar, S. Tiwari “Indigenous design of a Traffic Light Control system responsive to the local traffic dynamics and priority vehicles,”, Computers & Industrial Engineering Research Papers, Elsevier, ISSN NO. 0360-8352, Department - ECE

51. HL Kagdada, A Materny, DK Singh “Decreasing toxicity and increasing photoconversion efficiency by Sn-substitution of Pb in 5-ammonium valeric acid-based two-dimensional hybrid perovskite materials”, Physical Chemistry Chemical Physics (RSC) Research Papers, RSC, ISSN NO. 1463-9084, Department - BS

52. Nikhil Kashyap, Rizwan Abdul Rahman Rashid, Navneet Khanna “Carbon emissions, techno-economic and machinability assessments to achieve sustainability in drilling Ti6Al4V ELI for medical industry applications”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

53. Dhanola A., Khanna N., Gajrani K.K. “A critical review on liquid superlubricitive technology for attaining ultra-low friction”, Renewable and Sustainable Energy Reviews Research Papers, Elsevier, ISSN NO. 1364-0321, Department - ME

54. Pimenov D.Y., Mia M., Gupta M.K., Machado A.R., Pintaude G., Unune D.R., Khanna N., Khan A.M., Tomaz I., Wojciechowski S., Kuntoglu M. “Resource saving by optimization and machining environments for sustainable manufacturing: A review and future prospects”, Renewable and Sustainable Energy Reviews Research Papers, Elsevier, ISSN NO. 1364-0321, Department - ME

55. Roy S., Shukla P., Kumar R., Sahoo S.C., Pal T.K., Rajput A., Klak J., Hada M., Vignesh K.R., Das S. “Utilization of diamagnetic Zn(II) ion to boost the anisotropic nature of Ln(III) ion in heterodinuclear Zn(II)–Ln(III) single-molecule magnets”, Applied Organometallic Chemistry Research Papers, Wiley, ISSN NO. 1099-0739, Department - BS

56. Baldin V., da Silva L.R.R., Gelamo R.V., Iglesias A.B., da Silva R.B., Khanna N., Rocha Machado A. “Influence of Graphene Nanosheets on Thermo-Physical and Tribological Properties of Sustainable Cutting Fluids for MQL Application in Machining Processes”, lubricants Research Papers, MDPI, ISSN NO. 2075-4442, Department - ME

57. Kumari, S., Shah, M., Modi, Y., Bandhu, D., Zadafiya, K., Abhishek, K “Effect of Various Lubricating Strategies on Machining of Titanium Alloys: A State-of-the-Art Review”, Coatings Research Papers, MDPI, ISSN NO. 2079-6412, Department - ME

58. Wang S.-Y., Du Z.-B., Huang W., Choubey G. “Numerical study on a novel device for hydrogen mixing enhancement in a scramjet engine: Coaxial injector”, Aerospace Science and Technology Research Papers, Elsevier, ISSN NO. 1270-9638, Department - ME

59. MK Dikshit, G Iyer, K Joshi, N Khanna “PREFACE: RECENT DEVELOPMENT IN COMPOSITES AND ITS APPLICATIONS”, Composites: Mechanics, Computations, Applications: An International Journal Research Papers, Begell House, ISSN NO. 2152-2073, Department - ME

60. G Choubey, VK Singh “PREFACE FOR SPECIAL ISSUE: ADVANCES OF COMPUTATIONAL FLUID DYNAMICS IN THE AEROSPACE DOMAIN”, International Journal of Fluid Mechanics Research Research Papers, Begell House, ISSN NO. 2152-5110, Department - ME

61. N Khanna, A Rodríguez, P Shah, O Pereira. et al. “Comparison of dry and liquid carbon dioxide cutting conditions based on machining performance and life cycle assessment for end milling GFRP”, The International Journal of Advanced Manufacturing Technology Research Papers, Springer, ISSN NO. 1433-3015, Department - ME

62. Pimenov D.Y., Kumar Gupta M., da Silva L.R.R., Kiran M., Khanna N., Krolczyk G.M. “Application of measurement systems in tool condition monitoring of Milling: A review of measurement science approach”, Measurement Research Papers, Elsevier, ISSN NO. 0263-2241, Department - ME

63. PA Dabhi, SK Patel, YD Pipaliya “On various spectra of elements of $${mathcal {A}} imes _ heta {mathcal {B}} $$ A× θ B”, The Journal of Analysis Research Papers, Springer, ISSN NO. 2367-2501, Department - BS

64. Shekhawat K., Sharma V.K. “A new family of decreasing density and hazard quantile functions for modeling time-to-event data”, International Journal of Modeling, Simulation, and Scientific Computing Research Papers, WS, ISSN NO. 1793-9623, Department - BS

65. D Patel, A Bhojani, D Ray, DK Singh et al. “Glucose induced self-assembly and phase separation in hydrophilic triblock copolymers and its governing mechanism”, Physical Chemistry Chemical Physics (RSC) Research Papers, RSC, ISSN NO. 1463-9084, Department - BS

66. RM Raghavendra, G Iyer, A Kumar, A Subramaniam “Coherent To Semi-Coherent Transition in Semiconductor Heteroepitaxial Superlattices”,  Research Papers, Begell House, ISSN NO. 2152-2073, Department - ME

67. Ram Wanare, Prathyusha Jayanthi, & Kannan K.R.Iyer “Experimental study on sustainable stabilization of marine soil with ultrafine slag and activator for controlling its cracking characteristics”, Construction and Building Materials Research Papers, Elsevier, ISSN NO. 1879-0526, Department - CE

68. MJ Shah, KS Pandya, P Chauhan “Direct ADC Controlled Asymmetric Cascaded Multilevel Inverter”, Engineering, Technology & Applied Science Research Research Papers, ETASR, ISSN NO. 1792-8036, Department - EE

69. Hardik H. Gajjar, Jai Devi Jeyaraman & Daya Shankar Kaul “Role of Azadirachta indica (Neem) and Polyalthia longifolia (Asopalav) trees for improving outdoor thermal environment in unorganized urban settings”, International Journal of Biometeorology Research Papers, Springer, ISSN NO. 1432-1254, Department - BS

70. Divya Jadav, Deepak K. Pandey, Tushar Patil, Dheeraj K. Singh, Mahuya Bandyopadhyay et al. “Ordered silica matrices supported ionic liquids as highly efficient catalysts for fine chemical synthesis”, Journal of Porous Materials Research Papers, Springer, ISSN NO. 1573-4854, Department - BS

71. K Singh, M Kaushik, M Kumar “Integrating α-cut interval based fuzzy fault tree and Bayesian network analysis for criticality analysis of submarine pipeline leakage: A novel approach”, Process Safety and Environmental Protection Research Papers, Elsevier, ISSN NO. 0957-5820, Department - BS

72. PA Dabhi, YD Pipaliya “On various properties of Module Lau product of algebras”, Mathematical Analysis and its Contemporary Research Papers, , ISSN NO. , Department - BS

73. N Bordoloi, KM Pandey, G Choubey “Computational investigation of transverse fuel-injection scramjet combustor for different incoming Mach numbers”, International Journal of Fluid Mechanics Research Research Papers, Begell House, ISSN NO. 2152-5110, Department - ME

74. Din Bandhu, E. Venugopal Goud, Jay J. Vora, Subhash Das, Kumar Abhishek, Ramendra Kumar Gupta, Ashish Thakur, Soni Kumari & K. Devaki Devi “Influence of Regulated Metal Deposition and Gas Metal Arc Welding on ASTM A387-11–2 Steel Plates: As-deposited Inspection, Microstructure, and Mechanical Properties”, Journal of Materials Engineering and Performance Research Papers, Springer, ISSN NO. 1059-9495, Department - ME

75. Kumari Ambe Verma, Krishna Murari Pandey & Gautam Choubey “Numerical Investigation on Combustion Performance of Various Fuels in Wedge-Shaped Strut Based Scramjet Combustor”, International Journal of Fluid Mechanics Research Research Papers, Begell House, ISSN NO. 2152-5110, Department - ME

76. Manvi Kaushik & Mohit Kumar “An α-cut interval based IF-importance measure for intuitionistic fuzzy fault tree analysis of subsea oil and gas production system”, Applied Ocean Research Research Papers, Elsevier, ISSN NO. 0141-1187, Department - BS

77. M Pandey, N Tsunoji, Y Kubota, M Bandyopadhyay “Amine and Sulfonic Acid Anchored Porous Silica as Recyclable Heterogeneous Catalysts for Ring‐Opening of Oxiranes”, Chemistry Select Research Papers, Chemistry Europe, ISSN NO. 2365-6549, Department - BS

78. Mohit Kumar & Kulbir Singh “Fuzzy fault tree analysis of chlorine gas release hazard in Chlor-Alkali industry using α-cut interval-based similarity aggregation method”, Applied Soft Computing  Research Papers, Elsevier, ISSN NO. 1568-4946, Department - BS

79. Murarka S., Wadichar A., Bhurane A., Sharma M., Acharya U.R. “Automated classification of cyclic alternating pattern sleep phases in healthy and sleep-disordered subjects using convolutional neural network”, Computers in Biology and Medicine Research Papers, Elsevier, ISSN NO. 0010-4825, Department - EE

80. N Dalwadi, D Deb, S Ozana “Rotor Failure Compensation in a Biplane Quadrotor Based on Virtual Deflection”, Drones Research Papers, MDPI, ISSN NO. 2504-446X, Department - EE

81. SD Jayswal, M Mungule “Performance assessment of Alccofine with silica fume, fly ash and slag for development of high strength mortar”, Frontiers of Structural and Civil Engineering Research Papers, Springer, ISSN NO. 2095-2449, Department - CE

82. Mahida, S., Shah, Y.U., Sangita et al. “Rheological Evaluation of Bitumen Binders with Polystyrene Waste”, International Journal of Pavement Research and Technology Research Papers, Springer, ISSN NO. 1997-1400, Department - CE

83. Madhu Pandey, Divya Jadav, Anu Manhas, Siddhi Kediya, Nao Tsunoji, Rajesh Kumar, Sourav Das, Mahuya Bandyopadhyay “Synthesis and characterization of mononuclear Zn complex, immobilized on ordered mesoporous silica and their tunable catalytic properties”, Molecular Catalysis Research Papers, Elsevier, ISSN NO. 2468-8231, Department - BS

84. Raval P., Patel D., Prajapati R., Badheka V., Gupta M.K., Khanna N. “Energy consumption and economic modelling of performance measures in machining of wire arc additively manufactured Inconel-625”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

85. N Khanna, J Wadhwa, A Pitroda, P Shah, J Schoop “Life cycle assessment of environmentally friendly initiatives for sustainable machining: A short review of current knowledge and a case study”, SUSTAINABLE MATERIALS AND TECHNOLOGIES Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

86. G Choubey, VK Singh “Advances of Computational Fluid Dynamics in Aerospace Domain”, International Journal of Fluid Mechanics Research Research Papers, Begell House, ISSN NO. 2152-5110, Department - ME

87. Vimal Kumar Pathak, Swati Gangwar, Ramanpreet Singh, Ashish Kumar Srivastava, & Mithilesh Dikshit “A comprehensive survey on the ant lion optimiser, variants and applications”, Journal of Experimental & Theoretical Artificial Intelligence Research Papers, Taylor & Francis, ISSN NO. 1362-3079, Department - ME

88. Rituparna Das, Deepak K. Pandey, Dheeraj Singh at el. “Strong-field ionization of CH3Cl: proton migration and association”, Physical Chemistry Chemical Physics (RSC) Research Papers, RSC, ISSN NO. 1463-9084, Department - BS

89. Ji C., Liu B., Huang W., Li S.-B., Meng Z.-E., Yan L., Choubey G. “Design exploration on the drag reduction and thermal protection over a blunted waverider with multiple opposing jets”, Aerospace Science and Technology Research Papers, Elsevier, ISSN NO. --, Department - ME

90. Patil S., Jani R., Purabiarao N., Desai A., Desai I., Bhargava K. “Flexible Solar Cells”, Fundamentals of Solar Cell Design, Wiley Book Chapters, , ISSN NO. 9781119725022, Department - ECS

91. Vivek Kumar Singh, Gautam Choubey, S. Suresh, (Eds.) “Advances in Thermal Sciences: Select Proceedings of ICFAMMT 2022”, Lecture Notes in Mechanical Engineering, Springer Book Chapters, , ISSN NO. 978-981-19-6470-1, Department - ME

92. Manish Chaturvedi, Pankesh Patel, Ramnarayan Yadav “Recent Advancements in ICT Infrastructure and Applications”, Studies in Infrastructure and Control, Springer  Book Chapters, , ISSN NO. 978-981-19-2374-6, Department - ECS

93. Mungule M., Iyer K.K.R. “A Review on Role of Pavement Materials on Urban Heat Island Effects (Book Title: Sustainable Cities and Resilience)”, Lecture Notes in Civil Engineering, vol 183, Springer Book Chapters, , ISSN NO. 978-981-16-5543-2, Department - CE

94. J Shah, K Bhatt, P Trivedi, S Easa “Road Safety Conditions and Management in India: Challenges and Opportunities (Infrastructure Planning and Management in India)”, Studies in Infrastructure and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-8837-9, Department - HSS

95. Pravin Jadhav & Rahul Nath Choudhury “Infrastructure Planning and Management in India: Opportunities and Challenges”, Studies in Infrastructure and Control Book Chapters, , ISSN NO. 978-981-16-8837-9, Department - HSS

96. M Faniband, KV Marulkar, P Jadhav “Sustainable Infrastructure Development in India: Drivers and Barriers (Infrastructure Planning and Management in India)”, Studies in Infrastructure and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-8837-9, Department - HSS

97. P Bhanwar, S Thakur, TN Dave “Effects of Air Intrusion Technique on Permeability of Liquefiable Soil (Book Title: Earthquake Geotechnics)”, Lecture Notes in Civil Engineering, Springer  Book Chapters, , ISSN NO. 978-981-16-5669-9, Department - CE

98. Kagdada H.L., Sharma V., Parwani A.K., Singh D.K. “Strain-Engineered Electronic and Thermoelectric Properties of Two-Dimensional SnGe (Book Title: Recent Advances in Mechanical Infrastructure)”, Lecture Notes in Intelligent Transportation and Infrastructure, Springer Book Chapters, , ISSN NO. 978-981-16-7660-4, Department - BS

99. Gorade U., Bandhu D., Kumari S., Rath J., Abhishek K. “Design of Bluetooth-Controlled Floor Cleaning Robot (Book Title: Recent Advances in Mechanical Infrastructure)”, Lecture Notes in Intelligent Transportation and Infrastructure, Springer Book Chapters, , ISSN NO. 978-981-16-7660-4, Department - ME

100. Chadaram S., Yadav S.K. “Fracture Analysis of Crack Positioned Perpendicular to the Poling Direction in Piezoelectric Material Using XFEM (Book Title: Recent Advances in Mechanical Infrastructure)”, Lecture Notes in Intelligent Transportation and Infrastructure, Springer Book Chapters, , ISSN NO. 978-981-16-7660-4, Department - ME

101. J Vora, C Patel, K Abhishek, R Chaudhari “Influence of Machining Parameters of Fiber Laser Cutting on Al6061-T6 (Book Title: Recent Advances in Mechanical Infrastructure)”, Lecture Notes in Intelligent Transportation and Infrastructure, Springer Book Chapters, , ISSN NO. 978-981-16-7660-4, Department - ME

102. Jogidas P., Bandhu D., Kumari S., Abhishek K. “Design and Fabrication of Mini Woodworking Lathe Machine (Book Title: Recent Advances in Mechanical Infrastructure)”, Lecture Notes in Intelligent Transportation and Infrastructure, Springer Book Chapters, , ISSN NO. 978-981-16-7660-4, Department - ME

103. Vora J., Jain A., Sheth M., Gajjar K., Abhishek K., Chaudhari R. “A Review on Machining Aspects of Shape Memory Alloys (Book Title: Recent Advances in Mechanical Infrastructure)”, Lecture Notes in Intelligent Transportation and Infrastructure, Springer Book Chapters, , ISSN NO. 978-981-16-7660-4, Department - ME

104. Kumar P., Parwani A.K. “Techno-Economic Assessment of IGCC Power Plant Retrofitted with Chemical Looping Combustion for Carbon Capture (Book Title: Recent Advances in Mechanical Infrastructure)”, Lecture Notes in Intelligent Transportation and Infrastructure, Springer Book Chapters, , ISSN NO. 978-981-16-7660-4, Department - ME

105. Patel K., Gupta D.K. “Experimental Investigation of Solar Panel Integrated with Mirror Reflector and Cooling (Book Title: Recent Advances in Mechanical Infrastructure)”, Lecture Notes in Intelligent Transportation and Infrastructure, Springer Book Chapters, , ISSN NO. 978-981-16-7660-4, Department - ME

106. Chaudhari R. & Kumar, A. et al. “Effect of Different Tool Electrodes (Wire) of WEDM Process of Inconel 718 (Book Title: Recent Advances in Mechanical Infrastructure)”, Lecture Notes in Intelligent Transportation and Infrastructure, Springer Book Chapters, , ISSN NO. 978-981-16-7660-4, Department - ME

107. Kamlesh Parmar, Ajit Kumar Parwani, Sumit Tripathi “A Review on Recent Advances in Pulsating Heat Pipes (Book Title: Recent Trends in Fluid Dynamics Research)”, Lecture Notes in Mechanical Engineering  Book Chapters, , ISSN NO. 978-981-16-6928-6, Department - ME

108. Yadav P.M., Choubey G., Tripathi S.  “Effect of Different Shock Generator Configurations on Ethylene-Fuelled Transverse Injection-Based Scramjet Combustor (Book Title: Recent Trends in Fluid Dynamics Research)”, Lecture Notes in Mechanical Engineering  Book Chapters, , ISSN NO. 978-981-16-6928-6, Department - ME

109. Parthkumar Patel, Ravikumar Karmur, Gautam Choubey & Sumit Tripathi “Analysis of Room Airflow Characteristics Using CFD Approach (Book Title: Recent Trends in Fluid Dynamics Research)”, Lecture Notes in Mechanical Engineering  Book Chapters, , ISSN NO. 978-981-16-6928-6, Department - ME

110. Patel T., Naik A., Patidar S., Choubey G., Tripathi S. “Dynamic Study of Bird Strike on Rigid Plate (Book Title: Recent Trends in Fluid Dynamics Research)”, Lecture Notes in Mechanical Engineering  Book Chapters, , ISSN NO. 978-981-16-6928-6, Department - ME

111. Nikul Vadher, Vimal Panara, Vivek Trivedi, Mahesh Mungule, Kannan K. R. Iyer “Study on Fatigue Response of Concrete and Its Effect on Life-Cycle Behavior of Concrete Structures (Book Title: Resilient Infrastructure: Select Proceedings of VCDRR 2021)”, Lecture Notes in Civil Engineering Book Chapters, , ISSN NO. 978-981-16-6978-1, Department - CE

112. Dipankar Deb, Jason Burkholder and Gang Tao “Adaptive Synthetic Jet Actuation for Aircraft Control (Book Title: Adaptive Compensation of Nonlinear Actuators for Flight Control Applications)”, Studies in Systems, Decision and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-4161-9, Department - EE

113. Dipankar Deb, Jason Burkholder and Gang Tao “NN-Based High-Order Adaptive Compensation Framework for Signal Dependencies (Book Title: Adaptive Compensation of Nonlinear Actuators for Flight Control Applications)”, Studies in Systems, Decision and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-4161-9, Department - EE

114. Dipankar Deb, Jason Burkholder and Gang Tao “Signal-Dependent Uncertainty Compensation: A General Framework (Book Title: Adaptive Compensation of Nonlinear Actuators for Flight Control Applications)”, Studies in Systems, Decision and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-4161-9, Department - EE

115. Dipankar Deb, Jason Burkholder and Gang Tao “Adaptive Compensation at High Angles of Attack (Book Title: Adaptive Compensation of Nonlinear Actuators for Flight Control Applications)”, Studies in Systems, Decision and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-4161-9, Department - EE

116. Dipankar Deb, Jason Burkholder and Gang Tao “Adaptive Compensation at Low Angles of Attack: Nonlinear Aircraft Model (Book Title: Adaptive Compensation of Nonlinear Actuators for Flight Control Applications)”, Studies in Systems, Decision and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-4161-9, Department - EE

117. Dipankar Deb, Jason Burkholder and Gang Tao “Synthetic Jet Actuators and Arrays: Modeling and Control (Book Title: Adaptive Compensation of Nonlinear Actuators for Flight Control Applications)”, Studies in Systems, Decision and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-4161-9, Department - EE

118. Deb, Dipankar, Burkholder, Jason, Tao, Gang “Adaptive Compensation of Nonlinear Actuators for Flight Control Applications”, Studies in Systems, Decision and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-4160-2, Department - EE

119. V Trivedi, N Vadher, V Panera, KKR Iyer, M Mungle “Effect of plastic strips on elastic properties of concrete under cyclic loading”, Proceedings of the 12th Structural Engineering Convention (SEC 2022), NCDMM, MNIT Jaipur Conference Paper, Alwaha Scientific Publishing Services, ASPS, ISSN NO. 2830-909X, Department - CE

120. Pushkar Patel, Harsh Kakani, Manish Chaturvedi and Naveen Kumar “On Pricing Models for Electric Vehicle Charging”, 2022 IEEE 25th International Conference on Intelligent Transportation Systems (ITSC) Conference Paper, IEEE, ISSN NO. 978-1-6654-6880-0, Department - ECS

121. Bordoloi, N., Pandey, K.M., Choubey, G.  “A Review on the Selection of Materials and Heat Transfer Properties in Scramjet Engines”, Advances in Thermal Sciences Select Proceedings of ICFAMMT 2022 Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-981-19-6470-1, Department - ME

122. Pabbala Monish Yadav, Kavina Bhojani & Gautam Choubey “Effect of Variation of Free Stream Boundary Conditions on Flow Characteristics of Transverse Injection-Based Scramjet Combustor Equipped with Shock Generators”, Advances in Thermal Sciences Select Proceedings of ICFAMMT 2022 Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-981-19-6470-1, Department - ME

123. Rakesh Majumder & Gautam Choubey “Wettability Interaction on Two-Phase Flow in Microfluidic Flow-Focusing Geometry”, Advances in Thermal Sciences Select Proceedings of ICFAMMT 2022 Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-981-19-6470-1, Department - ME

124. M Solanki, T Bhatt, G Kshitij, G Choubey “Effect of Divergence Angles on the Performance of a Cavity-Based Scramjet Combustor”, Advances in Thermal Sciences Select Proceedings of ICFAMMT 2022 Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-981-19-6470-1, Department - ME

125. Vidhi Pandya; K Manjunath “A Preliminary Study for Realizing Frequency Control Loop of Grid-tied Synchronverter”, 2022 International Conference on Breakthrough in Heuristics And Reciprocation of Advanced Technologies (BHARAT) Conference Paper, IEEE, ISSN NO. 978-1-6654-3625-0, Department - ECS

126. Kumar A., Pasari S., Mehta A., Verma H. “Impact of directional effect of strong ground motion on scenario-based earthquake hazards: Preliminary results”, International Conference on Advances in Earth and Environmental Studies (AEES 2022) Conference Paper, IOP Conference Series: Earth and Environmental Science, ISSN NO. 1755-1315, Department - CE

127. Pasari S., Asudani P., Mehta A. “Machine learning algorithms in geostatistical data analysis: Formulation and observation”, International Conference on Advances in Earth and Environmental Studies (AEES 2022) Conference Paper, IOP Conference Series: Earth and Environmental Science, ISSN NO. 1755-1315, Department - CE

128. PL. Ramkumar, Nikita Gupta, Akshay Kumar, Aman Shukla “VIKOR Method-Based Selection of the Most Suited Bioplastic for the Injection Moulding Process Amongst Potential Alternatives”, Advances in Forming, Machining and Automation Conference Paper, Lecture Notes in Mechanical Engineering, ISSN NO. , Department - ME

129. Jaypal Singh Rajput & Manish Sharma “Automated Detection of Hypertension Disease Using Machine Learning and Signal Processing-Based Methods”, Advanced Computing and Intelligent Technologies. Lecture Notes in Electrical Engineering, vol 914 Conference Paper, Springer, ISSN NO. 978-981-19-2980-9, Department - ECS

130. M Suthar, S Sata, KM Vyas, M Mungule “Investigation on strength enhancement of cement paste using biogenic nanoparticles”, International Conference on Advances in Construction Materials and Structures Conference Paper, Materials Today: Proceedings, Elsevier, ISSN NO. 2214-7853, Department - CE

131. S Jayswal, M Mungule “Effect of temperature on stress strain behavior of high calcium fly ash and alccofine blended high strength concrete”, International Conference on Advances in Construction Materials and Structures Conference Paper, Materials Today: Proceedings, Elsevier, ISSN NO. 2214-7853, Department - CE

132. S Jayswal, M Mungule “A comparative assessment of strength and fracture performance of alccofine and fly ash blended high performance concrete”, International Conference on Advances in Construction Materials and Structures Conference Paper, Materials Today: Proceedings, Elsevier, ISSN NO. 2214-7853, Department - CE

133. SK Yadav, G Thakre “Solution of Lubrication Problems with Deep Neural Network”, Advances in Manufacturing Engineering  Conference Paper, Lecture Notes in Mechanical Engineering, Springer, ISSN NO. 978-981-19-4208-2, Department - ME

134. Ram Wanare, Prathyusha Jayanthi, Kannan K.R.Iyer “A study on cracking behavior of marine soil modified with ultrafine slag under cured and uncured conditions”, Materials Today: Proceedings Conference Paper, Elsevier, ISSN NO. 2214-7853, Department - CE

135. Parishi H.Dalal, Mahi Patil, Trudeep N. Dave, Kannan K.R.Iyer “An experimental study on controlled low strength material (CLSM) for utilization as sustainable backfill”, Materials Today: Proceedings Conference Paper, Elsevier, ISSN NO. 2214-7853, Department - CE

136. Ram Wanare, Kannan K.R.Iyer & Trudeep N.Dave “Application of biosolids in civil engineering: State of the art”, Materials Today: Proceedings Conference Paper, Elsevier, ISSN NO. 2214-7853, Department - CE

137. Harit Upadhyay, Mahesh Mungule & KannanK. R. Iyer “Issues and challenges for development of geopolymer concrete”, Materials Today: Proceedings Conference Paper, Elsevier, ISSN NO. 2214-7853, Department - CE

138. Kumar N., Kumari S., Abhishek K., Nandi G., Ghosh N. “Study on various parameters of WEDM using different optimization techniques: A review”, International Conference on Materials, Processing & Characterization (13th ICMPC) Conference Paper, Materials Today: Proceedings, Elsevier, ISSN NO. 2214-7853, Department - ME

139. Sheetal Solanki, Kakara Vidhya Bharathi, Kshitij Bhargava “Fundamental analysis of lead-free CsGeI3 perovskite solar cell”, Materials Today: Proceedings Conference Paper, Elsevier, ISSN NO. 2214-7853, Department - EE

140. R Jani, K Bhargava “Numerical simulation of NFA organic solar cells with C 60 and NiO as charge transport layers”, 2022 Workshop on Recent Advances in Photonics  Conference Paper, IEEE, ISSN NO. 978-1-6654-0702-1, Department - EE

141. Nema A., Kaul D.S., Mukherjee K., Jeyaraman J.D. “Photo-active catalysts in building and construction materials for air pollution treatment: A bibliometric analysis”, Materials Today: Proceedings Conference Paper, Elsevier, ISSN NO. 2214-7853, Department - CE

142. Phanse S., Chaturvedi M., Srivastava S. “Modelling and Simulation of Road Traffic under Rainy Conditions”, 2022 14th International Conference on COMmunication Systems and NETworkS, COMSNETS 2022 Conference Paper, IEEE, ISSN NO. 978-1-6654-2104-1, Department - CSE

143. Chaturvedi M., Srivastava S. “A Multi-modal Ride Sharing Framework for Last Mile Connectivity”, 2022 14th International Conference on COMmunication Systems and NETworkS, COMSNETS 2022 Conference Paper, IEEE, ISSN NO. 978-1-6654-2104-1, Department - CSE

144. M Faniband, P Jadhav “Impact of First Wave of COVID-19 on Government Bond Market”, National Conference on Business Management and Analytics Conference Paper, NIT, Tiruchirappalli , ISSN NO. --, Department - HSS

145. P Trivedi, J Shah “Road Accident Hazard Prevention by Applying the Haddon Matrix”, A System Engineering Approach to Disaster Resilience Conference Paper, Lecture Notes in Civil Engineering, Springer, ISSN NO. 978-981-16-7397-9, Department - CE

146. J Goswami, N Chaudhari, Y Goswami, J Shah “Economic Feasibility of Personal Rapid Transit (PRT) Mode of Transport: A Case for Ahmedabad City, Gujarat”, Resilient and Responsible Smart Cities Conference Paper, Advances in Science, Technology & Innovation, Springer, ISSN NO. 978-3-030-86499-6, Department - CE

147. Archana Nigam; Manish Chaturvedi & Sanjay Srivastava “An Empirical Study on Parameters Affecting Traffic Stream Variables Under Rainy Conditions”, 2022 14th International Conference on COMmunication Systems & NETworkS (COMSNETS) Conference Paper, IEEE, ISSN NO. 978-1-6654-2104-1, Department - EE

148. PA Dabhi, KB Solanki “On Hulanicki and Barnes lemmas for pp-Banach algebras”, Proceedings - Mathematical Sciences Research Papers, IAS, Springer, ISSN NO. 0973-7685, Department - BS

149. HL Kagdada, S Bhattacharya, A Materny, DK Singh “Two-Dimensional Halide Perovskite Materials Featuring 2-(Methylthio) ethylamine Organic Spacers for Efficient Solar and Thermal Energy Harvesting”, The Journal of Physical Chemistry C  Research Papers, ACS, ISSN NO. 1932-7455, Department - BS

150. D Makwana, B Pramod, P Chaudhari, CS Sasmal “Processing of bioresorbable closed-cell Mg foam for bone implant applications”, Materials and Manufacturing Processes Research Papers, T&F, ISSN NO. 1532-2475, Department - ME

151. Airao J., Nirala C.K., Khanna N. “Novel use of ultrasonic-assisted turning in conjunction with cryogenic and lubrication techniques to analyze the machinability of Inconel 718”, Journal of Manufacturing Processes Research Papers, Elsevier, ISSN NO. 1526-6125, Department - ME

152. Shah P., Khanna N., Arora A., Srivastava N. “Comparison of LN2 and LCO2 based on machining performance indicators for drilling Inconel 718”, Journal of Manufacturing Processes Research Papers, Elsevier, ISSN NO. 1526-6125, Department - ME

153. Bandhu, D., Djavanroodi, F., Shaikshavali, G., Vora, J. J., Abhishek, K., Thakur, A., Attarilar, S. “Effect of Metal-Cored Filler Wire on Surface Morphology and Micro-Hardness of Regulated Metal Deposition Welded ASTM A387-Gr.11-Cl.2 Steel Plates”, Materials Research Papers, MDPI, ISSN NO. 1996-1944, Department - ME

154. Li Z, Gautam Choubey, Saad HA, Musa A, Zhang Y, Hu C. “The presence of downstream ramp on fuel mixing of the multi micro jets at supersonic cross flow”, International Journal of Hydrogen Energy Research Papers, Elsevier, ISSN NO. 0360-3199, Department - ME

155. Prashant Khanna, PL Ramkumar and Nikita Gupta “A review of polymers, fibre additives and fibre treatment techniques used in rotational moulding process”, High Performance Polymers Research Papers, Sage Pub., ISSN NO. 1361-6412, Department - ME

156. PL. Ramkumar & Tarun Rijwani “Additive manufacturing of metals and ceramics using hybrid fused filament fabrication”, Journal of the Brazilian Society of Mechanical Sciences and Engineering Research Papers, Springer, ISSN NO. 1806-3691, Department - ME

157. Gajjar H.V., Srivastava A., Ujeniya V.D. “Application of multi linear regression (MLR) analysis for predicting settlement reduction ratio (Sr) of stone columns reinforced soft ground”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - CE

158. MJ Shah, KS Pandya, P Chauhan “An MPPT-based 31-Level ADC Controlled Micro-Inverter”, Engineering, Technology & Applied Science Research Research Papers, Etasr, ISSN NO. 1792-8036, Department - ECE

159. DK Pandey, HL Kagdada, A Materny, DK Singh “Adsorption and Breaking of Hazardous Methyl Mercury on Hybrid Structures of Ionic Liquids and ZnO Nanoclusters”, Journal of Molecular Liquids Research Papers, Elsevier, ISSN NO. 0167-7322, Department - BS

160. Deepak K Pandey, Muzammil Kuddushi, Arvind Kumar, Dheeraj K Singh “Iron oxide nanoparticles loaded smart hybrid hydrogel for anti-inflammatory drug delivery: Preparation and characterizations”,  Research Papers, Elsevier, ISSN NO. 0927-7757, Department - BS

161. M Sharma, K Kumar, P Kumar, RS Tan, UR Acharya “Pulse oximetry SpO 2 signal for automated identification of sleep apnea: a review and future trends”, Physiological Measurement Research Papers, IOP Science, ISSN NO. 0967-3334, Department - ECE

162. Sarikaya M., Gupta M.K., Tomaz I., Krolczyk G.M., Khanna N., Karabulut, Prakash C., Buddhi D. “Resource savings by sustainability assessment and energy modelling methods in mechanical machining process: A critical review”, Journal of Cleaner Production Research Papers, Elsevier, ISSN NO. 0959-6526, Department - ME

163. Khanna N., Airao J., Nirala C.K., Krolczyk G.M. “Novel sustainable cryo-lubrication strategies for reducing tool wear during ultrasonic-assisted turning of Inconel 718”, Tribology International Research Papers, Elsevier, ISSN NO. 0301-679X, Department - ME

164. Khushbu Bhatt, Ninad Gore and Jiten Shah “Critical Gap Estimation and Its Implication on Capacity and Safety of High-Speed Un-Signalised T-Intersection under Heterogeneous Traffic Conditions”, Communications - Scientific letters Research Papers, University of Zilina, ISSN NO. 2585-7878, Department - CE

165. Aditya Powari, Dharmendra Sadhwani, Lalita Gupta, Ram Narayan Yadav “Novel Romberg approximation of the Gaussian Q function and its application over versatile κ − μ shadowed fading channel”, Digital Signal Processing Research Papers, Elsevier, ISSN NO. 1051-2004, Department - ECE

166. Prabas Banerjee, Rupam Laha, Mithilesh K. Dikshit et al. “A study on the performance of various predictive models based on artificial neural network for backward metal flow forming process”, International Journal on Interactive Design and Manufacturing Research Papers, Springer, ISSN NO. 1955-2505, Department - ME

167. Airao J., Khanna N., Nirala C.K. “Tool wear reduction in machining Inconel 718 by using novel sustainable cryo-lubrication techniques”, Tribology International Research Papers, Elsevier, ISSN NO. 0301-679X, Department - ME

168. Karabulut S., Bilgin M., Karakoc H., Khanna N., Sarikaya M. “A study on the influence of thermally assisted novel hybrid methods on the drilling behavior of Ti6Al4V alloy”, Tribology International Research Papers, Elsevier, ISSN NO. 0301-679X, Department - ME

169. S Chadaram, SK Yadav “Interaction integral approach for the Evaluation of Crack-front Singularities in a Solid Cantilever Beam under Magneto-Electro-Elastic loading using XFEM”, Journal of Intelligent Material Systems and Structures Research Papers, Sage Pub., ISSN NO. 1530-8138, Department - ME

170. PJ Bagga, MA Makhesana, PP Darji, KM Patel N. Khanna “Tool life prognostics in CNC turning of AISI 4140 steel using neural network based on computer vision”, International Journal of Advanced Manufacturing Technology Research Papers, Springer, ISSN NO. 1433-3015, Department - ME

171. Verma KA, Pandey KM, Gautam Choubey “Numerical investigation of combustion performance of various fuels in wedge-shaped strut-based scramjet combustor”, International Journal of Fluid Mechanics Research Research Papers, Begell House, ISSN NO. 2152-5110, Department - ME

172. Pruthvish Rajput, Manish Chaturvedi, Vivek Patel “Development of Advanced Public Transportation System with Limited Infrastructure Support”, Software Impacts  Research Papers, Elsevier, ISSN NO. 2665-9638, Department - ECE

173. Mithilesh K. Dikshit “Determination of force coefficient based on instantaneous forces and linear mechanistic model in ball end milling”, The Journal of Engineering Manufacture Research Papers, Sage Pub., ISSN NO. 2041-2975, Department - ME

174. Ashish D.Rana, Indrajit D.Pharne, Kshitij Bhargava “Numerical simulation of highly efficient double perovskite solar cell using SCAPS-1D”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - ECE

175. H Thiyagarajan, M Mungule, S Sasmal “Micro aggregate and pozzolanic reactivity of fly ash: effect on fracture properties”, Australian Journal of Civil Engineering Research Papers, T&F, ISSN NO. 2204-2245, Department - CE

176. G Choubey, S Tripathi, VK Singh “Selected Papers from the International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (ICFAMMT 2022)”, Heat Transfer Engineering Research Papers, T&F, ISSN NO. 1521-0537, Department - ME

177. N Dalwadi, D Deb, SM Muyeen “Observer based rotor failure compensation for biplane quadrotor with slung load”, Ain Shams Engineering Journal Research Papers, Elsevier, ISSN NO. 2090-4479, Department - EE

178. R Wanare, KKR Iyer “A study to investigate the effect of different proportion of ultrafine slag and calcium-based activator for sustainable crack mitigation of marine soil”, Cleaner Materials Research Papers, Elsevier, ISSN NO. 2772-3976, Department - CE

179. Pruthvish Rajput, Manish Chaturvedi, Vivek Patel “Road condition monitoring using unsupervised learning based bus trajectory processing”, Multimodal Transportation Research Papers, Elsevier, ISSN NO. 2772-5863, Department - ECE

180. V Panara, V Bhonde, S Patel, S Jayswal, KKR Iyer, M Mungule “Effect of Waste PET Strips as Reinforcement in Concrete under Cyclic Loading”, Cleaner Materials Research Papers, Elsevier, ISSN NO. 2772-3976, Department - CE

181. M Pandey, R Prajapti, P Shukla, P Paredi, S Das, M Bandyopadhyay et al. “Synthesis of novel tetranuclear Ni complex incorporated mesoporous silica for improved photocatalytic degradation of methylene blue in presence of visible light”, Polyhedron Research Papers, Elsevier, ISSN NO. 0277-5387, Department - BS

182. Sudhakar Chaudhary, Jitesh P. Mandaliya “Mesh-free Galerkin approximation for parabolic nonlocal problem using web-splines”, Computers and Mathematics with applications Research Papers, Elsevier, ISSN NO. 0898-1221, Department - BS

183. Deepak K. Pandey, Divya Jadav, Tushar Patil, Swapnil Dharaskar, Nao Tsunoji, Rajesh Kumar, Dheeraj K. Singh, Mahuya Bandyopadhyay “Ordered Mesoporous Silica Matrices Supported Ionic Liquids for Efficient CO2 Separation from CO2/CH4 Gas Mixture: Experimental and Theoretical Investigation”, Journal of Molecular liquids Research Papers, Elsevier, ISSN NO. 0167-7322, Department - BS

184. Dhiman H.S., Deb D., Guerrero J.M. “On wavelet transform based convolutional neural network and twin support vector regression for wind power ramp event prediction”, Sustainable Computing: Informatics and Systems Research Papers, Elsevier, ISSN NO. 2210-5379, Department - ECE

185. Kshitij G., Khanna N., Yildirim C.V., Dagli S., Sarikaya M. “Resource conservation and sustainable development in the metal cutting industry within the framework of the green economy concept: An overview and case study”, Sustainable Materials and Technologies Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

1. Deb D., Bhargava K. “Degradation, Mitigation, and Forecasting Approaches in Thin Film Photovoltaics”, Academic Press (Elsevier) Book Chapters, , ISSN NO. 9780128236420, Department - EE

2. Parwani, A.K., Ramkumar, P., Abhishek, K., Yadav, S.K. (Eds.) “Recent Advances in Mechanical Infrastructure Proceedings of ICRAM 2020”, Lecture Notes in Intelligent Transportation and Infrastructure Book Chapters, , ISSN NO. 978-981-334-176-0, Department - ME

3. Hardik V. Gajjar, Veerabhadra M. Rotte “A Numerical Study on Geotextile-Reinforced Slopes”, Proceedings of the Indian Geotechnical Conference 2019, Springer Book Chapters, , ISSN NO. 978-981-336-466-0, Department - CE

4. Teli S., Kundhani P., Choksi V., Sinha P., Iyer K.K.R. “Influence of Loading and Soil Modeling Approach on Soil-Shallow Foundation Interaction”, Proceedings of the Indian Geotechnical Conference 2019, Springer Book Chapters, , ISSN NO. 978-981-336-466-0, Department - CE

5. Pal M.L., Yadav A.K., Gupta D.K. “Application CO2 as Refrigerant for HVAC, Supermarket, and Cold Chain—A Review (Book Title: Climate Change and Green Chemistry of CO2 Sequestration)”, Green Energy and Technology, Springer Book Chapters, , ISSN NO. 978-981-16-0029-6, Department - ME

6. Jiten Shah, Krupa Shah, Pravin Jadhav, Raghavendra Bhalerao “Intelligent Transport Management: Issues and Challenges”, IIP Book Chapters, , ISSN NO. 978-93-93364-07-4, Department - CE

7. Raja Munusamy, Jiwan Kumre, Sudhir Chaturvedi, Din Bandhu “Design and Development of Portable UAV Ground Control and Communication Station Integrated with Antenna Tracking Mechanism (Book Title: Intelligent Infrastructure in Transportation and Management Proceedings of i-TRAM 2021)”, Studies in Infrastructure and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-6936-1, Department - ME

8. Muhammadriyaj Faniband, Prajakta Arote & Pravin Jadhav “Government Policies and Foreign Direct Investment Inflows: Evidence from Infrastructure Sector in India (Book Title: Intelligent Infrastructure in Transportation and Management Proceedings of i-TRAM 2021)”, Studies in Infrastructure and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-6936-1, Department - HSS

9. Totakura Bangar Raju, Pradeep Singh, Binod Singh, Pravin Jadhav “Identification of Factors Affecting Coal Freight Market (Book Title: Intelligent Infrastructure in Transportation and Management Proceedings of i-TRAM 2021)”, Studies in Infrastructure and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-6936-1, Department - HSS

10. Pruthvish Rajput, Manish Chaturvedi, Vivek Patel “Opportunistic Sensing-Based Route Demand Assessment and Feeder Bus Scheduling (Book Title: Intelligent Infrastructure in Transportation and Management Proceedings of i-TRAM 2021)”, Studies in Infrastructure and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-6936-1, Department - ECE

11. L. Rajesh Reddy, Adarsh Sharma, Pravin Magdam, Krupa Shah “Electric Vehicle Motor Tests and Standards in India: A Review (Book Title: Intelligent Infrastructure in Transportation and Management Proceedings of i-TRAM 2021)”, Studies in Infrastructure and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-6936-1, Department - ECE

12. Parth Bhavsar, Joshi Priyank, K. Manjunath “A Preliminary Study on PLL-Based Frequency Extraction of an Unbalanced Voltage Signal (Book Title: Intelligent Infrastructure in Transportation and Management Proceedings of i-TRAM 2021)”, Studies in Infrastructure and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-6936-1, Department - ECE

13. Varsha Kshirsagar Deshpande, Sheel Shah, Raghavendra Bhalerao “Intelligent Vehicle Module Using Image Processing (Book Title: Intelligent Infrastructure in Transportation and Management Proceedings of i-TRAM 2021)”, Studies in Infrastructure and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-6936-1, Department - EE

14. Patel K., Mehta A. “Preliminaries of sliding mode control and graph theory (Book title: Discrete-Time Sliding Mode Protocols for Discrete Multi-Agent System)”, Studies in Systems, Decision and Control (Springer) Book Chapters, , ISSN NO. 978-981-15-6311-9, Department - EE

15. Khushbu Bhatt, Jiten Shah “Driver’s Risk Compelling Behavior for Crossing Conflict Area at Three-Legged Uncontrolled Intersection (Book Title: Intelligent Infrastructure in Transportation and Management Proceedings of i-TRAM 2021)”, Studies in Infrastructure and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-6936-1, Department - CE

16. Priyank Trivedi, Jiten Shah “Road Crash Severity Ranking by Applying a Multi-criteria Decision-Making Tool: Analytical Hierarchy Process (Book Title: Intelligent Infrastructure in Transportation and Management Proceedings of i-TRAM 2021)”, Studies in Infrastructure and Control (Springer) Book Chapters, , ISSN NO. 978-981-16-6936-1, Department - CE

17. Patel K., Mehta A. “Discrete-time sliding mode protocols for leader-following consensus of homogeneous discrete multi-agent system with fixed graph topology”, Studies in Systems, Decision and Control Book Chapters, , ISSN NO. 978-981-15-6311-9, Department - EE

18. Jiten Shah, Shriniwas S. Arkatkar, Pravin Jadhav “Intelligent Infrastructure in Transportation and Management: Proceedings of i-TRAM 2021”, Studies in Infrastructure and Control Book Chapters, , ISSN NO. 978-981-16-6938-5, Department - CE

19. Vora, Gnanesh, Hemendrasinh Umat, Dinbandhu, Soni Kumari, Chetansingh Rajput, and Kumar Abhishek “Reduction of Scrap and Rework Cost by Implementing 5S Methodology: A Case Study (Book Title: Recent Advances in Mechanical Infrastructure: Proceedings of ICRAM 2020 )”, Lecture Notes in Intelligent Transportation and Infrastructure, Springer Book Chapters, , ISSN NO. 978-981-334-176-0, Department - ME

20. Kunal Gawhade, Pranav Raj, PL. Ramkumar “Design for Retractable Staircase for Buses (Book Title: Recent Advances in Mechanical Infrastructure Proceedings of ICRAM 2020)”, Lecture Notes in Intelligent Transportation and Infrastructure Book Chapters, , ISSN NO. 978-981-334-176-0, Department - ME

21. Akshay Kumar, PL. Ramkumar, Aman Shukla, Nikita Gupta “Prediction of Mechanical Properties in Rotational Moulding of LLDPE Using Machine Learning Model for the Given Oven Residence Time (Book Title: Recent Advances in Mechanical Infrastructure Proceedings of ICRAM 2020)”, Lecture Notes in Intelligent Transportation and Infrastructure Book Chapters, , ISSN NO. 978-981-334-176-0, Department - ME

22. Pal T.K., Das S. “Metal organic frameworks as ratiometric sensors: Application and outlook (Book Title:Metal-Organic Frameworks (MOFs): Chemistry, Applications and Performance)”, Nova Science Publishers, Inc. Book Chapters, , ISSN NO. 978-153619585-9, Department - BS

23. Nikita Gupta, PL. Ramkumar “Processibility Analysis of Rotationally Moldable Linear Low-Density Polyethylene/Glass Fiber Blend (Book Title: Recent Advances in Mechanical Infrastructure Proceedings of ICRAM 2020)”, Lecture Notes in Intelligent Transportation and Infrastructure Book Chapters, , ISSN NO. 978-981-334-176-0, Department - ME

24. Jaisawal J., Srivastav A.K., Singh D.K., Kumar U. “Atomic Force Microscopy-Based Force Spectroscopy and Its Various Applications (Book Title: Modern Techniques of Spectroscopy)”, Progress in Optical Science and Photonics Book Chapters, , ISSN NO. 978-981-33-6084-6, Department - BS

25. Pravin Jadhav, Rahul Nath Choudhury “Impact of US–China trade war on the global economy, free trade, and WTO (Book Title:The China–US Trade War and South Asian Economies, Ed. By Rahul Nath Choudhury)”, Routledge Book Chapters, , ISSN NO. 9781003053613, Department - HSS

26. Nikita Gupta & PL Ramkumar “Material Characterization of Linear Low Density Polyethylene Blended with Synthetic Fibers Using FTIR for Rotational Molding Process (Book Title: Advances in Material Science and Engineering)”, Lecture Notes in Mechanical Engineering (Springer) Book Chapters, , ISSN NO. 978-981-16-3641-7, Department - ME

27. Rawat A., Deb D., Upadhyay J. “Secured System Design for Failure Mitigation of Railway Tracks (Book Title: Recent Trends In Peripheral Security)”, Services and Business Process Reengineering (Springer) Book Chapters, , ISSN NO. 978-981-16-1205-3, Department - EE

28. Rawat A., Deb D., Upadhyay J. “Robotic System Configuration with Localization, Path Planning, and Computer Vision (Book Title: Recent Trends In Peripheral Security)”, Services and Business Process Reengineering (Springer) Book Chapters, , ISSN NO. 978-981-16-1205-3, Department - EE

29. Rawat A., Deb D., Upadhyay J. “WLAN-Based Smart Door Closer Design with Image Classification (Book Title: Recent Trends In Peripheral Security) stems)”, Services and Business Process Reengineering (Springer) Book Chapters, , ISSN NO. 978-981-16-1205-3, Department - EE

30. Rawat A., Deb D., Upadhyay J. “System Design for the Detection of Humans Trapped in Snow (Book Title: Recent Trends In Peripheral Security)”, Services and Business Process Reengineering (Springer) Book Chapters, , ISSN NO. 978-981-16-1205-3, Department - EE

31. Rawat A., Deb D., Upadhyay J. “Design of a Peripheral Security Module Based on Exchange of Specific Data Rates (Book Title: Recent Trends In Peripheral Security)”, Services and Business Process Reengineering (Springer) Book Chapters, , ISSN NO. 978-981-16-1205-3, Department - EE

32. Kumar, Pulkit & AK Parwani “CFD Analysis of Chemical Looping Combustion with Special Emphasis on Indian Coal: A Review (Book Title: Climate Change and Green Chemistry of CO2 Sequestration, Eds.Goel, M.)”, Green Energy and Technology, Springer Book Chapters, , ISSN NO. 978-981-16-0029-6, Department - ME

33. Rawat, Abhishek, Deb, Dipankar, Upadhyay, Jatin “Recent Trends In Peripheral Security Systems”, Services and Business Process Reengineering (Springer) Book Chapters, , ISSN NO. 978-981-16-1205-3, Department - EE

34. Dinbandhu, Vishalkumar Prajapati, Jay J. Vora, and Kumar Abhishek “Advances in gas metal arc welding process: modifications in short-circuiting transfer mode”, Advanced Welding and Deforming: A volume in Handbooks in Advanced Manufacturing Book Chapters, , ISSN NO. 978-0-12-822049-8, Department - ME

35. DK Pandey, HL Kagdada, P Sanchora, DK Singh “Overview of Raman Spectroscopy: Fundamental to Applications (Book Title: Modern Techniques of Spectroscopy)”, Progress in Optical Science and Photonics, Springer Book Chapters, , ISSN NO. 978-981-33-6084-6 , Department - BS

36. Singh, Dheeraj Kumar, Pradhan, Manik, Materny, Arnulf (Eds.) “Modern Techniques of Spectroscopy Basics, Instrumentation, and Applications”, Progress in Optical Science and Photonics, Springer Book Chapters, , ISSN NO. 978-981-336-084-6, Department - BS

37. Ankit Shah and Axaykumar Mehta “Sliding Mode Direct Power Control of a Grid-Connected DFIG Using an Extended State Observer (Book Title: Emerging Trends in Sliding Mode Control-Theory and Application)”, Studies in Systems, Decision and Control book series (SSDC, volume 318)Springer Book Chapters, , ISSN NO. 978-981-15-8613-2, Department - EE

38. Axaykumar Mehta and Bijnan Bandyopadhya (Eds.) “Emerging Trends in Sliding Mode Control - Theory and Application”, Studies in Systems, Decision and Control book series (SSDC, volume 318)Springer Book Chapters, , ISSN NO. 978-981-15-8615-6, Department - EE

39. Keyurkumar Patel and Axaykumar Mehta “Discrete Higher-Order Sliding Mode Leader-Following Consensus Protocols for Homogeneous Discrete Multi-Agent System (Book Title: Emerging Trends in Sliding Mode Control-Theory and Application)”, Studies in Systems, Decision and Control book series (SSDC, volume 318)Springer Book Chapters, , ISSN NO. 978-981-15-8613-2, Department - EE

40. Patel K., Mehta A. “Event-triggered discrete-time higher order sliding mode protocol for leader-following consensus of homogeneous dmas (Book title: Discrete-Time Sliding Mode Protocols for Discrete Multi-Agent System)”, Studies in Systems, Decision and Control, Springer Book Chapters, , ISSN NO. 978-981-15-6311-9, Department - EE

41. Singh, A.P., Deb, D., Agrawal, H., Balas, V.E. “Fractional Modeling and Controller Design of Robotic Manipulators: With Hardware Validation”, Intelligent Systems Reference Library 194 (Springer) Book Chapters, , ISSN NO. e-978-3-030-58247-0, H-978-3-030-58246-3, Department - EE

42. Singh A.P., Deb D., Agrawal H., Balas V.E. “Modeling, Stability and Fractional Control of Single Flexible Link Robotic Manipulator (Book Title: Fractional Modeling and Controller Design of Robotic Manipulators)”, Intelligent Systems Reference Library, Springer Book Chapters, , ISSN NO. 978-3-030-58247-0, Department - EE

43. Singh A.P., Deb D., Agrawal H., Balas V.E. “Fractional Model Predictive and Adaptive Fractional Model Predictive Controller Design (Book Title: Fractional Modeling and Controller Design of Robotic Manipulators)”, Intelligent Systems Reference Library, Springer Book Chapters, , ISSN NO. 978-3-030-58247-0, Department - EE

44. Singh A.P., Deb D., Agrawal H., Balas V.E. “FOPID Controller Design for IO Model of Robotic Systems (Book Title: Fractional Modeling and Controller Design of Robotic Manipulators)”, Intelligent Systems Reference Library, Springer Book Chapters, , ISSN NO. 978-3-030-58247-0, Department - EE

45. Singh A.P., Deb D., Agrawal H., Balas V.E. “Model Reference Adaptive Fractional Order Controller Design (Book Title: Fractional Modeling and Controller Design of Robotic Manipulators)”, Intelligent Systems Reference Library, Springer Book Chapters, , ISSN NO. 978-3-030-58247-0, Department - EE

46. Singh A.P., Deb D., Agrawal H., Balas V.E. “Fractional Modeling of Robotic Systems (Book Title: Fractional Modeling and Controller Design of Robotic Manipulators)”, Intelligent Systems Reference Library, Springer Book Chapters, , ISSN NO. 978-3-030-58247-0, Department - EE

47. Singh A.P., Deb D., Agrawal H., Balas V.E. “Improved Fractional Model Selection and Control with Experimental Validation (Book Title: Fractional Modeling and Controller Design of Robotic Manipulators)”, Intelligent Systems Reference Library, Springer Book Chapters, , ISSN NO. 978-3-030-58247-0, Department - EE

48. Mehta A., Pasari S. “Hyperspectral Image Clustering Using Nearest Neighbor”, 2021 IEEE International India Geoscience and Remote Sensing Symposium (InGARSS) Conference Paper, IEEE, ISSN NO. 978-1-6654-4249-7, Department - CE

49. Upadhyay J., Rawat A., Deb D. “UAV-Based Target Localization in Dense Areas with Computer Vision and GPS Hybrid Navigation Model”, 2021 IEEE International India Geoscience and Remote Sensing Symposium (InGARSS) Conference Paper, IEEE, ISSN NO. 978-1-6654-4249-7, Department - EE

50. Modi A., Sharma V., Rawat A. “Design and Analysis of Multilayer Patch Antenna for IRNSS, GPS, Wi-Fi, Satellite, and Mobile Networks Communications”, 2021 12th International Conference on Computing Communication and Networking Technologies (ICCCNT) Conference Paper, IEEE, ISSN NO. 978-1-7281-8595-8, Department - EE

51. Ram Wanare, Kannan K. R. Iyer, Prathyusha Jayanthi “Recent Advances in Early Warning Systems for Landslide Forecasting”, Geohazard Mitigation Conference Paper, Lecture Notes in Civil Engineering, vol 192. Springer, ISSN NO. 978-981-16-6140-2, Department - CE

52. Dalal P.H., Patil M., Wanare R., Dave T.N., Iyer K.K.R. “Recent Innovations and Practices in Geotechnical Engineering for Sustainable Infrastructure Development”, Geohazard Mitigation Conference Paper, Lecture Notes in Civil Engineering, vol 192. Springer, ISSN NO. 978-981-16-6140-2, Department - CE

53. Shivam Thakur, Punit Bhanwar, Trudeep Dave “A Study on Liquefaction Susceptibility of Road Infrastructure in Surat City”, Geohazard Mitigation  Conference Paper, Lecture Notes in Civil Engineering (vol. 192), Springer, ISSN NO. 978-981-16-6140-2, Department - CE

54. AA Sutar & VM Rotte “Prevention of Saltwater Intrusion: A Laboratory-Scale Study on Electrokinetic Remediation”, Climate Change and Water Security Select Proceedings of VCDRR 2021 Conference Paper, Lecture Notes in Civil Engineering (vol. 178) Springer, ISSN NO. 978-981-16-5501-2, Department - CE

55. S Dave, SV Patil, K Bhargava “Effect of Parametric Variation on Performance of NFA Organic Solar Cell: A Simulation Study”, Proceedings of 28th National Conference on Condensed Matter Physics: Condensed Matter Days 2020 (CMDAYS20) Conference Paper, Springer, ISSN NO. 978-981-16-5409-1, Department - EE

56. HS Dhiman, D Deb, SM Muyeen “Lithium-Ion Battery Prognostics based on Support Vector Regression and Time-Series Analysis”, 2021 IEEE 4th International Conference on Computing, Power and Communication Technologies (GUCON) Conference Paper, IEEE, ISSN NO. 978-1-7281-9951-1, Department - EE

57. SV Patil, S Dave, K Bhargava “Comparative Analysis of MAPbI3 and FAPbI3 based Perovskite Solar Cells: A Numerical Evaluation”, Proceedings of 28th National Conference on Condensed Matter Physics Conference Paper, Springer Proceedings in Physics, ISSN NO. 978-981-16-5407-7, Department - EE

58. Neetu Chaudhary and Mithilesh K. Dikshit “A state of art review on the graphene and carbon nanotube reinforced nanocomposites: A molecular dynamics approach”, 3rd International Conference on Advances in Mechanical Engineering and Nanotechnology Conference Paper, Materials Today: Proceedings, Elsevier, ISSN NO. 2214-7853, Department - ME

59. Shah S., Parwani A.K. “Estimation of local heat flux for turbulent flow in a helical coil tube by conjugate gradient method”, 8th European Thermal Sciences Conference (EUROTHERM 2021) 20-22 September 2021 Conference Paper, Journal of Physics: Conference Series; IOP Science, ISSN NO. 1742-6596, Department - ME

60. Jay Chaudhari, Harsh S. Dhiman, Parth Suthar, K. Manjunath “Wavelet Transform Based Comparative Analysis of Wind Speed Forecasting Techniques”, Renewable Energy Optimization, Planning and Control  Conference Paper, Studies in Infrastructure and Control, Springer, ISSN NO. 978-981-16-4663-8, Department - EE

61. Anurag Sharma, Nikhitha Elsa Sam, Asmita Tanwani, Hardipsinh Jadeja, & Bimlesh Kumar “Experimental Investigation of Friction Factor In Alluvial Channel”, International Conference on Hydraulics, Water Resources and Ocean Engineering (Hydro-2021) Conference Paper, Paramount Publishing House, ISSN NO. 978-93-90631-56-8, Department - CE

62. R Wanare, P Sinha, KKR Iyer “A Study on Suction Properties, Subgrade Modulus and Compressibility of Marine Soil Subgrade for Flexible Pavements”, Advances in Transportation Geotechnics IV  Conference Paper, Lecture Notes in Civil Engineering (Springer), ISSN NO. 978-3-030-77230-7, Department - CE

63. P Bhanwar, S Ahirwar, T Dave “Reuse of Waste HDPE Bottle-Derived Geocells for Stabilization of Hilly Roadway Slopes”, Advances in Transportation Geotechnics IV  Conference Paper, Lecture Notes in Civil Engineering (Springer), ISSN NO. 978-3-030-77230-7, Department - CE

64. AA Sutar, VM Rotte “A Study on Electrokinetic Dewatering of Saturated Soil”, Advances in Transportation Geotechnics IV  Conference Paper, Lecture Notes in Civil Engineering (Springer), ISSN NO. 978-3-030-77230-7, Department - CE

65. Murali Mohan M., Venugopal Goud E.,& Dinbandhu “Parametric Optimization and Evaluation of Machining Performance for Aluminium-Based Hybrid Composite Using Utility-Taguchi Approach”, Recent Advances in Smart Manufacturing and Materials Conference Paper, Lecture Notes in Mechanical Engineering, ISSN NO. 978-981-16-3033-0, Department - ME

66. Dinbandhu, Thakur A., Venugopal Goud E., Abhishek K., Vora J.J. “An Overview of Proteus: The world’s First Man-Made Non-cuttable Material”, Recent Advances in Smart Manufacturing and Materials Conference Paper,  Lecture Notes in Mechanical Engineering. Springer, ISSN NO. 978-981-16-3033-0, Department - ME

67. Dinbandhu, Abhishek K., Thakur A., Nagaphani Sastry M., Devaki Devi K., Nishant A. “A Study on Mechanical Attributes of Epoxy-Carbon Fiber-Terminalia bellirica Embedded Hybrid Composites”, Recent Advances in Smart Manufacturing and Materials Conference Paper,  Lecture Notes in Mechanical Engineering. Springer, ISSN NO. 978-981-16-3033-0, Department - ME

68. Dinbandhu, Abhishek K. “Parametric Optimization and Evaluation of RMDTM Welding Performance for ASTM A387 Grade 11 Steel Plates Using TOPSIS-Taguchi Approach”, International Conference on Advances in Materials Processing & Manufacturing Applications- iCADMA 2020 Conference Paper,  Advances in Materials Processing and Manufacturing Applications, Springer, ISSN NO. 978-981-16-0909-1, Department - ME

69. Akash Modi; Vanshul Sharma; Abhishek Rawat “Compact Design of Ka-Band antenna for 5G Applications”, 2021 3rd International Conference on Signal Processing and Communication (ICPSC) Conference Paper, IEEE, ISSN NO. 978-1-6654-2864-4, Department - EE

70. Akash Modi; Vanshul Sharma; Abhishek Rawat “Compact Design of Multiband Antenna for IRNSS, Satellite, 4G and 5G Applications”, 2021 5th International Conference on Computing Methodologies and Communication (ICCMC) Conference Paper, IEEE, ISSN NO. 978-1-6654-0360-3, Department - EE

71. Ramkumar P.L., Gupta N., Shukla A., Kumar A. “Bio-polymer selection for injection molding process using Multi Objective Optimization by Ratio Analysis method”, Second International Conference on Aspects of Materials Science and Engineering (ICAMSE 2021) Conference Paper, Materials Today: Proceedings, Elsevier, ISSN NO. 2214-7853, Department - ME

72. Nigam A., Chaturvedi M., Srivastava S. “Impact of Rainfall and Waterlogging on Traffic Stream Variables in Developing Countries”, 2021 International Conference on COMmunication Systems & NETworkS (COMSNETS) Conference Paper, IEEE, ISSN NO. 978-1-7281-9127-0, Department - ECE

73. Dhiman H.S., Deb D. “Probability distribution functions for short-term wind power forecasting”, Soft Computing Applications. SOFA 2018. Advances in Intelligent Systems and Computing Conference Paper, Springer, ISSN NO. 978-3-030-51992-6, Department - EE

74. P Sinha, R Wanare, P Dalal, KKR Iyer “An Analytical Parametric Study on Behaviour of Flexible Raft Foundation”, Proceedings of the Indian Geotechnical Conference 2019: IGC-2019 Volume III Conference Paper, Lecture Notes in Civil Engineering, Springer, ISSN NO. 978-981-336-444-8, Department - CE

75. AK Siddiqui, TN Dave “Effect of Placement Moisture Content on Swelling–Shrinkage Behaviour of Expansive Soil”, Proceedings of the Indian Geotechnical Conference 2019: IGC-2019 Volume III Conference Paper, Lecture Notes in Civil Engineering, Springer, ISSN NO. 978-981-336-444-8, Department - CE

76. P Bhanwar, T Dave “A Review on Soil Liquefaction Mitigation Techniques and Its Preliminary Selection”, Proceedings of the Indian Geotechnical Conference 2019: IGC-2019 Volume III Conference Paper, Lecture Notes in Civil Engineering, Springer, ISSN NO. 978-981-336-444-8, Department - CE

77. VM Rotte, AA Sutar, A Patel, A Patel “Effect of Various Parameters on Electrokinetic Dewatering of Saturated Clay”, Proceedings of the Indian Geotechnical Conference 2019: IGC-2019 Volume III Conference Paper, Lecture Notes in Civil Engineering, Springer, ISSN NO. 978-981-336-444-8, Department - CE

78. SV Singh, M Elgarhy, Z Ahmad, VK Sharma “New Class of Probability Distributions Arising from Teissier Distribution”, Mathematical Modeling, Computational Intelligence Techniques and Renewable Energy, Proceedings of the First International Conference, MMCITRE 2020.  Conference Paper, Advances in Intelligent Systems and Computing (Springer), ISSN NO. 978-981-15-9952-1, Department - Maths

79. G Vora, H Umat, D Soni Kumari, C Rajput, K Abhishek “Reduction of Scrap and Rework Cost by Implementing 5S Methodology: A Case Study”, Recent Advances in Mechanical Infrastructure Proceedings of ICRAM 2020 Conference Paper, Lecture Notes in Mechanical Engineering (Springer), ISSN NO. 978-981-33-4176-0 , Department - ME

80. K Gawhade, P Raj, PL Ramkumar “Design for Retractable Staircase for Buses”, Recent Advances in Mechanical Infrastructure Proceedings of ICRAM 2020 Conference Paper, Lecture Notes in Mechanical Engineering (Springer), ISSN NO. 978-981-33-4176-0 , Department - ME

81. SK Sinha, V Chopde, K Abhishek, A Devani “Design of Automatic Multipurpose Indian Flatbread Maker”, Recent Advances in Mechanical Infrastructure Proceedings of ICRAM 2020 Conference Paper, Lecture Notes in Mechanical Engineering (Springer), ISSN NO. 978-981-33-4176-0 , Department - ME

82. MV Mansaram, S Chatterjee, Abhishek Kumar, Dinbandhu “Analysis of Dimensional Accuracy of ABS M30 Built Parts Using FDM Process”, Recent Advances in Mechanical Infrastructure Proceedings of ICRAM 2020 Conference Paper, Lecture Notes in Mechanical Engineering (Springer), ISSN NO. 978-981-33-4176-0 , Department - ME

83. P Sathavara, AK Parwani, M Panchal, P Chaudhuri “Estimation of Boundary Heat Flux with Conjugate Gradient Method by Experimental Transient Temperature Data”, Recent Advances in Mechanical Infrastructure Proceedings of ICRAM 2020 Conference Paper, Lecture Notes in Mechanical Engineering (Springer), ISSN NO. 978-981-33-4176-0 , Department - ME

84. M Dalal, R Virani, P Choudhary, AK Parwani “Emission and Performance Analysis of Four-Stroke Dual-Cylinder Engine Using Waste Plastic Pyrolysis Oil as Biodiesel”, Recent Advances in Mechanical Infrastructure Proceedings of ICRAM 2020 Conference Paper, Lecture Notes in Mechanical Engineering (Springer), ISSN NO. 978-981-33-4176-0 , Department - ME

85. Rajesh Kumar Verma, Prakhar Kumar Kharwar, Arpan Kumar Mondal, Kumar Abhishek, Jogendra Kumar “Exploration of MOORA Based Hybrid Taguchi Method for Multi-response Optimization—A Case Study”, Advances in Mechanical Engineering Select Proceedings of ICAME 2020 Conference Paper, Lecture Notes in Mechanical Engineering (Springer), ISSN NO. 978-981-15-0124-1, Department - ME

86. Szczotkarz N., Maruda R.W., Debowski D., Leksycki K., Wojciechowski S., Khanna N., Krolczyk G.M. “Formation of Surface Topography During Turning of AISI 1045 Steel Considering the Type of Cutting Edge Coating”, Advances in Science and Technology Research Journal Conference Paper, , ISSN NO. 2299-8624, Department - ME

87. Langhi M., Hosoda T. “Three-dimensional unsteady RANS model for hydraulic jumps”,  Conference Paper, T & F, ISSN NO. 2164-3040, Department - CE

88. Raghuram Kadali B., Ingole S., Iyer K.K.R., Subbarao S.S.V. “User Perception towards Ride hail Service: A case of Nagpur city, India”, European Transport Conference Paper, AIIT, ISSN NO. 1825-3997, Department - CE

89. Roy S., Shukla P., Prakash Sahu P., Sun Y.-C., Ahmed N., Chandra Sahoo S., Wang X.-Y., Kumar Singh S., Das S. “Zero-field Slow Magnetic Relaxation Behavior of Dy2 in a Series of Dinuclear {Ln2} (Ln=Dy, Tb, Gd and Er) Complexes: A Combined Experimental and Theoretical Study”, European Journal of Inorganic Chemistry Research Papers, Wiley, ISSN NO. 1099-0682, Department - BS

90. Manish Sharma, Sohamkumar Patel, U. Rajendra Acharya “Expert system for detection of congestive heart failure using optimal wavelet and heart rate variability signals for wireless cloud-based environment”, Expert Systems Research Papers, Wiley, ISSN NO. 1468-0394, Department - EE

91. Khanna N., Zadafiya K., Patel T., Kaynak Y., Rahman Rashid R.A., Vafadar A. “Review on machining of additively manufactured nickel and titanium alloys”, Journal of Materials Research and Technology Research Papers, Elsevier, ISSN NO. 2238-7854, Department - ME

92. Saurabh K. Yadav, Gananath D. Thakre & Chandra B. Khatri “Improvement in textured hole-entry hybrid journal bearing system by using multi-objective genetic algorithm”, Journal of the Brazilian Society of Mechanical Sciences and Engineering Research Papers, Springer, ISSN NO. 1806-3691, Department - ME

93. Dharmendra Sadhwani, Aditya Powari and Naman Mehta “New, Simple and Accurate Approximation for the Gaussian Q Function with Applications”, IEEE Communications Letters Research Papers, IEEE, ISSN NO. 1558-2558, Department - EE

94. Shah, Prassan; Khanna, Navneet; Maruda, Radoslaw W.; Gupta, Munish Kumar; Krolczyk, Grzegorz M. “Life cycle assessment to establish sustainable cutting fluid strategy for drilling Ti-6Al-4V”, SUSTAINABLE MATERIALS AND TECHNOLOGIES Research Papers, Elsevier, ISSN NO. 2214-9937, Department - ME

95. Pandre, Sandeep; Morchhale, Ayush; Kotkunde, Nitin; Singh, Swadesh Kumar; Khanna, Navneet; Saxena, Ambuj “Determination of Warm Deep Drawing Behavior of DP590 Steel Using Numerical Modeling and Experimental Process Window”, ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING Research Papers, Springer, ISSN NO. 2191-4281, Department - ME

96. Prakash A. Dabhi “On two variable Beurling algebra analogues of theorems of Wiener and Lévy on Fourier series”, Proc. Amer. Math. Soc. Research Papers, AMS, ISSN NO. 1088-6826, Department - BS

97. P Kumar, DK Pandey, AK Parwani, DK Singh “A comprehensive multidisciplinary investigation on CO2 capture from diesel engine”, Environmental Science and Pollution Research Research Papers, Springer, ISSN NO. 1614-7499, Department - ME

98. Choubey, Gautam; Yadav, Pabbala Monish; Devarajan, Yuvarajan; Huang, Wei “Numerical investigation on mixing improvement mechanism of transverse injection based scramjet combustor”, ACTA ASTRONAUTICA Research Papers, Elsevier, ISSN NO. 1879-2030, Department - ME

99. Shah, Prassan; Khanna, Navneet; Singla, Anil Kumar; Bansal, Anuj “Tool wear, hole quality, power consumption and chip morphology analysis for drilling Ti-6Al-4V using LN2 and LCO2”, TRIBOLOGY INTERNATIONAL Research Papers, Elsevier, ISSN NO. 1879-2464, Department - ME

100. Sarikaya, Murat; Gupta, Munish Kumar; Tomaz, Italo; Pimenov, Danil Yu; Kuntoglu, Mustafa; Khanna, Navneet; Yildirim, Cagri Vakkas; Krolczyk, Grzegorz M. “A state-of-the-art review on tool wear and surface integrity characteristics in machining of superalloys”, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY Research Papers, Elsevier, ISSN NO. 1755-5817, Department - ME

101. Nikita Gupta & PL. Ramkumar “Effect of industrially processed glass fibre dust on mechanical, thermal and morphological properties mixed with LLDPE for rotational molding process”, Sādhanā Research Papers, Springer, ISSN NO. 0973-7677, Department - ME

102. Sanil Shah & Ajit Kumar Parwani “Estimation of local heat flux with CFD and enhanced conjugate gradient method for laminar and turbulent flow in a helical coil tube heat exchanger”, Heat and Mass Transfer Research Papers, Springer, ISSN NO. 1432-1181, Department - ME

103. Patil, Mahi; Dalal, Parishi H.; Shreedhar, Sowmya; Dave, Trudeep N.; Iyer, Kannan K. R. “Biostabilization techniques and applications in Civil Engineering: State-of-the-Art”, CONSTRUCTION AND BUILDING MATERIALS Research Papers, Elsevier, ISSN NO. 1879-0526, Department - CE

104. M Kuddushi, DK Pandey, Dheeraj K. Singh, J Mata, NI Malek “Ionic Hydrogel with Stimuli-Responsive, Self-healable and Injectable Characteristics for the Targeted and Sustained Delivery of Doxorubicin in the Treatment of Breast Cancer ”, Materials Advances, Research Papers, RSC Pub., ISSN NO. 2633-5409, Department - BS

105. Chadaram, Srinivasu; Yadav, Saurabh Kumar “Three-dimensional thermal fracture analysis of piezoelectric material by extended finite element methods”, ENGINEERING FRACTURE MECHANICS Research Papers, Elsevier, ISSN NO. 1873-7315, Department - ME

106. Singh, Abhaya Pal; Deb, Dipankar; Agrawal, Himanshu; Bingi, Kishore; Ozana, Stepan “Modeling and Control of Robotic Manipulators: A Fractional Calculus Point of View”, ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING Research Papers, Springer, ISSN NO. 2191-4281, Department - EE

107. V Kaushik, HL Kagdada, Dheeraj K. Singh, S Pathak “Enhancement of SERS effect in Graphene-Silver Hybrids ”, Applied Surface Science Research Papers, Elsevier, ISSN NO. 0169-4332, Department - BS

108. Sengupta, Ipsita; Gupta, Sagar; Deb, Dipankar; Ozana, Stepan “Dynamic Stability of an Electric Monowheel System Using LQG-Based Adaptive Control”, APPLIED SCIENCES-BASEL Research Papers, MDPI, ISSN NO. 2076-3417, Department - EE

109. Makarand Kane, Kamlesh Joshi, H. J. Bahirat, M. Phadke, S. V. Kulkarni, and S. S. Joshi “Comparative electrical characterization of spark-erosion of silicon and steel as a base and its implications on equivalent circuit”, Materials Science in Semiconductor Processing Research Papers, Elsevier, ISSN NO. 1369-8001, Department - ME

110. Arminder Singh Walia, Vineet Srivastava, Navneet Khanna et al. “Prediction of Tool Shape in Electrical Discharge Machining of EN31 Steel Using Machine Learning Techniques”, Metals Research Papers, MDPI, ISSN NO. 2075-4701, Department - ME

111. Prakash A. Dabhi & Darshana B. Likhada “On multipliers and compact multipliers of commutative semigroup algebra ℓp(S,ω)”, Advances in Operator Theory Research Papers, Springer, ISSN NO. 2538-225X, Department - BS

112. Tripathi, Sumit; Tan, Su Nee; Bhattacharya, Amitabh; Tabor, Rico F. “Measuring and modelling the adsorption kinetics of polydisperse PiBSA-based emulsifiers using dynamic interfacial tension measurements”, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS Research Papers, Elsevier, ISSN NO. 1873-4359, Department - ME

113. Upadhyay, Jatin; Rawat, Abhishek; Deb, Dipankar “Multiple Drone Navigation and Formation Using Selective Target Tracking-Based Computer Vision”, ELECTRONICS Research Papers, MDPI, ISSN NO. 2079-9292, Department - EE

114. Makwana, Dhaval; Bhingole, Pramod; Chaudhari, Paritosh “Statistical analysis for cost effective process parameters and localized strain hardening behavior of Al-7050 foam”, MATERIALS LETTERS Research Papers, Elsevier, ISSN NO. 1873-4979, Department - ME

115. Jaypal Singh Rajput, Manish Sharma, Divyash Kumbhani, U. Rajendra Acharya “Automated detection of hypertension using wavelet transform and nonlinear techniques with ballistocardiogram signals”, Informatics in Medicine Unlocked Research Papers, Elsevier, ISSN NO. 2352-9148, Department - ECE

116. PRAKASH A. DABHI & DARSHANA B. LIKHADA “ON ALGEBRA ISOMORPHISMS BETWEEN p-BANACH BEURLING ALGEBRAS”, Bulletin of the Australian Mathematical Society Research Papers, Cambridge Uni.Press, ISSN NO. 1755-1633, Department - BS

117. Morchhale A, Kotkunde N, Singh SK, Khanna N. “Prediction of fracture limits of IN625 alloy by coupling ductile damage models and anisotropic yielding functions with the classical Marciniak and Kuczyński model”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Research Papers, Sage, ISSN NO. 2041-2975, Department - ME

118. Nikita Joshi & Axaykumar Mehta “Fault-Tolerant Secondary Second-Order Sliding Mode Consensus Protocol for DC Microgrid”, Transactions of the Indian National Academy of Engineering Research Papers, Springer, ISSN NO. 2662-5423, Department - EE

119. Dhiman, Harsh S.; Deb, Dipankar; Muyeen, S. M.; Abraham, Ajith “Machine intelligent forecasting based penalty cost minimization in hybrid wind-battery farms”, INTERNATIONAL TRANSACTIONS ON ELECTRICAL ENERGY SYSTEMS Research Papers, Wiley, ISSN NO. 2050-7038, Department - EE

120. Dhiman, Harsh S.; Deb, Dipankar “Machine intelligent and deep learning techniques for large training data in short-term wind speed and ramp event forecasting”, INTERNATIONAL TRANSACTIONS ON ELECTRICAL ENERGY SYSTEMS Research Papers, Wiley, ISSN NO. 2050-7038, Department - EE

121. Zadafiya, K., Bandhu, D., Kumari, S., Chatterjee, S., & Abhishek, K. “Recent trends in drilling of carbon fiber reinforced polymers (CFRPs): A state-of-the-art review”, Journal of Manufacturing Processes Research Papers, Elsevier, ISSN NO. 1526-6125, Department - ME

122. Meet Parikh, Sanil Shah, Harsh Vaghela, Ajit Kumar Parwani “A comprehensive experimental and numerical estimation of thermal contact conductance”, International Journal of Thermal Sciences Research Papers, Elsevier, ISSN NO. 1290-0729, Department - ME

123. Shubham Kumar, Kanksha Anjaria, Dharmendra Sadhwani “Performance Analysis of Efficient Digital Modulation Schemes over Various Fading Channels”, AEU - International Journal of Electronics and Communications Research Papers, Elsevier, ISSN NO. 1434-8411, Department - EE

124. Airao, Jay; Nirala, Chandrakant K.; Lopez de Lacalle, Luis Noberto; Khanna, Navneet “Tool Wear Analysis during Ultrasonic Assisted Turning of Nimonic-90 under Dry and Wet Conditions”, METALS Research Papers, MDPI, ISSN NO. 2075-4701, Department - ME

125. Zadafiya, Kishan; Shah, Prassan; Shokrani, Alborz; Khanna, Navneet “Recent advancements in nano-lubrication strategies for machining processes considering their health and environmental impacts”, JOURNAL OF MANUFACTURING PROCESSES Research Papers, Elsevier, ISSN NO. 2212-4616, Department - ME

126. Ayush Morchhale, Anand Badrish, Nitin Kotkunde, Swadesh Kumar Singh, Navneet Khanna “Prediction of fracture limits of Ni–Cr based alloy under warm forming condition using ductile damage models and numerical method”, Transactions of Nonferrous Metals Society of China Research Papers, Elsevier, ISSN NO. 1003-6326, Department - ME

127. Maheshwari, Daksh; Ghosh, S. K.; Tripathy, R. K.; Sharma, Manish; Acharya, U. Rajendra “Automated accurate emotion recognition system using rhythm-specific deep convolutional neural network technique with multi-channel EEG signals”, COMPUTERS IN BIOLOGY AND MEDICINE Research Papers, Elsevier, ISSN NO. 1879-0534, Department - EE

128. Mansi Dhuria, Viraj Karambelkar, Vikram Rentala and Priyanka Sarmah “A strong broadband 21 cm cosmological signal from dark matter spin-flip interactions”, Journal of Cosmology and Astroparticle Physics Research Papers, IOP publishing, ISSN NO. 1475-7516, Department - BS

129. Khanna, N., Agrawal C., Pimenov, D. Y.,et al. “Review on Design and Development of Cryogenic Machining Setups for Heat Resistant Alloys and Composites”, Journal of Manufacturing Processes Research Papers, Elsevier, ISSN NO. 1526-6125, Department - ME

130. Sharma, Manish; Patel, Virendra; Acharya, U. Rajendra “Automated identification of insomnia using optimal bi-orthogonal wavelet transform technique with single-channel EEG signals”, KNOWLEDGE-BASED SYSTEMS Research Papers, Elsevier, ISSN NO. 1872-7409, Department - EE

131. Gupta, Sagar; Singh, Abhaya Pal; Deb, Dipankar; Ozana, Stepan “Kalman Filter and Variants for Estimation in 2DOF Serial Flexible Link and Joint Using Fractional Order PID Controller”, APPLIED SCIENCES-BASEL Research Papers, MDPI, ISSN NO. 2076-3417, Department - EE

132. Sharma, Manish; Tiwari, Jainendra; Patel, Virendra; Acharya, U. Rajendra “Automated Identification of Sleep Disorder Types Using Triplet Half-Band Filter and Ensemble Machine Learning Techniques with EEG Signals”, ELECTRONICS Research Papers, MDPI, ISSN NO. 2079-9292, Department - EE

133. Moinak Maiti & Pravin Jadhav “Impact of pollution level, death rate and illness on economic growth: evidence from the global economy”, SN Business & Economics  Research Papers, Springer, ISSN NO. 2662-9399, Department - HSS

134. Sumanta Pasari, Andrean V. H. Simanjuntak, Anand Mehta, Neha, And Yogendra Sharma “The Current State of Earthquake Potential on Java Island, Indonesia ”, Pure and Applied Geophysics Research Papers, Springer, ISSN NO. 1420-9136, Department - CE

135. G Perozzi; J J Rath; C Sentouh; J Floris; J C Popieul “Lateral shared sliding mode control for lane-keeping assist system in steer-by-wire vehicles: Theory and experiments”, IEEE Transactions on Intelligent Vehicles Research Papers, IEEE, ISSN NO. 2379-8904, Department - ME

136. D. Sadhwani and R. N. Yadav “Novel MGF expressions of ℱ composite fading channels with applications”, AEU - International Journal of Electronics and Communications Research Papers, Elsevier, ISSN NO. 1434-8411, Department - CSE

137. Manish Sharma, Virendra Patel, Jainendra Tiwari and U. Rajendra Acharya “Automated Characterization of Cyclic Alternating Pattern Using Wavelet-Based Features and Ensemble Learning Techniques with EEG Signals”, Diagnostics Research Papers, MDPI, ISSN NO. 2075-4418, Department - EE

138. Ninad Gore, Sanjay Dave, Jiten Shah, Shriniwas Arkatkar, Srinivas Pulugurtha “Effect of On-Street parking on pedestrian flow characteristics and level of service - an Indian viewpoint”, Case Studies on Transport Policy Research Papers, Elsevier, ISSN NO. 2213-624X, Department - CE

139. Prabas Banerjee, Nirmal Baran Hui, Mithilesh K Dikshit, Saikat Som “Fe modelling of three dimensional staggered backward metal flow forming process”, International Journal of Modern Manufacturing Technologies Research Papers, ModTech, ISSN NO. 2067-3604, Department - ME

140. Watitula Longkumer “Little Nationalities: Writing in English in the North-East ”, Journal of Comparative Literature and Aesthetics (Special Issue – Indian Writing in English: Perspectives on the Plural Nationspace) Research Papers, Vishvanatha Kaviraja Institute, ISSN NO. 0252-8169, Department - HSS

141. Majumdar, Dhrubajyoti; Pal, Tapan Kumar; Sakib, Shahenur Alam; Das, Sourav; Bankura, Kalipada; Mishra, Dipankar “Synthesis, spectroscopic characterization, and SC-XRD study of one privileged heteronuclear Ni(II)/Hg(II)-Salen complex: An exclusive DFT outlook”, INORGANIC CHEMISTRY COMMUNICATIONS Research Papers, Elsevier, ISSN NO. 1879-0259, Department - BS

142. Deepak K.Pandey, Hardik L.Kagdada, Arnulf Materny, Dheeraj K.Singh “Erratum to Hybrid Structure of Ionic Liquid and ZnO Nano Clusters for Potential Application in Dye-Sensitized Solar Cells”, Journal of Molecular Liquids  Research Papers, Elsevier, ISSN NO. 0167-7322, Department - BS

143. Dalwadi, Nihal; Deb, Dipankar; Kothari, Mangal; Ozana, Stepan “Disturbance Observer-Based Backstepping Control of Tail-Sitter UAVs”, ACTUATORS Research Papers, MDPI, ISSN NO. 2076-0825, Department - EE

144. Shah, Sanil “Numerical analysis of heat transfer between multiple jets and flat moving surface”, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER Research Papers, Elsevier, ISSN NO. 1879-2189, Department - ME

145. Nikita Gupta and PL. Ramkumar “Rheological and Thermal Investigation of Industrially Processed Glass Fiber Blended with Linear Low-Density Polyethylene for Rotational Molding Process”, Transactions of The Indian Institute of Metals Research Papers, Springer, ISSN NO. 0975-1645, Department - ME

146. Subhash J. Bhatt & Prakash A. Dabhi “Segal extensions and Segal algebras in uniform Banach algebras”,  Research Papers, Indian Journal of Pure and Applied Mathematics, ISSN NO. 0975-7465, Department - BS

147. HW Loh, CP Ooi, SG Dhok, M Sharma, AA Bhurane “Automated detection of cyclic alternating pattern and classification of sleep stages using deep neural network”, Applied Intelligence Research Papers, Springer, ISSN NO. 1573-7497, Department - EE

148. Anh-Tu Nguyen, Jagat Jyoti Rath, Chen Lv,Thierry-Marie Guerra and Jimmy Lauber “Human-Machine Shared Driving Control for Semi-Autonomous Vehicles Using Level of Cooperativeness”, Sensors Research Papers, MDPI, ISSN NO. 1424-8220, Department - ME

149. Salunke A.A., Nandy K., Puj K., Kamani M., Pathak S., Shah J., Bhalerao R.H., Jain A., Sharma M., Warikoo V., Patel K., Rathod P., Bhatt S., Tank T., Pandya S. “A proposed “Radiological Evaluation Score for Bone Tumors” (REST): An objective system for assessment of a radiograph in patients with suspected bone tumor”,  Research Papers, Musculoskeletal Surgery, ISSN NO. 2035-5106, Department - EE

150. Sharma, Manish; Kumbhani, Divyash; Yadav, Anuj; Acharya, U. Rajendra “Automated Sleep apnea detection using optimal duration-frequency concentrated wavelet-based features of pulse oximetry signals”, APPLIED INTELLIGENCE Research Papers, Springer, ISSN NO. 1573-7497, Department - EE

151. Manish Sharma, Jaypal Singh Rajput, Ru San Tan and U. Rajendra Acharya “Automated Detection of Hypertension Using Physiological Signals: A Review”, International Journal of Environmental Research and Public Health Research Papers, MDPI, ISSN NO. 1660-4601, Department - EE

152. Navneet Khanna, Prassan Shah, Luis Noberto Lópezde Lacalle, Adrián Rodríguez, Octavio Pereira “In pursuit of sustainable cutting fluid strategy for machining Ti-6Al-4V using life cycle analysis”, Sustainable Materials and Technologies Research Papers, Science Direct, ISSN NO. 2214-9937, Department - ME

153. Supriya Mahida, Yogesh U. Shah & Sangita Sharma “Analysis of the Influence of Using Waste Polystyrene in Virgin Bitumen”, International Journal of Pavement Research and Technology Research Papers, Springer, ISSN NO. 1997-1400, Department - CE

154. Matthias Althoff, Jagat Jyoti Rath “Comparison of guaranteed state estimators for linear time-invariant systems”, Automatica  Research Papers, Elsevier, ISSN NO. 0005-1098, Department - ME

155. Y Devarajan, B Nagappan, G Choubey, “Renewable Pathway and Twin Fueling Approach on Ignition Analysis of a Dual-Fuelled Compression Ignition Engine”, Energy & Fuels Research Papers, ACS Pub., ISSN NO. 1520-5029, Department - ME

156. Ambarish Maji, Tuhin Deshamukhya, Gautam Choubey, Anupam Choubey “Performance evaluation of perforated pin fin heat sink using particle swarm optimization and MCDM techniques”, Journal of Thermal Analysis and Calorimetry Research Papers, Springer, ISSN NO. 1588-2926, Department - ME

157. Rajashekar Naraveni, Sudhakar Chaudhary, Srinivas Kumar VVK “Higher order approximation of biharmonic problem using the WEB-Spline based mesh-free method”, International Journal of Nonlinear Sciences and Numerical Simulation Research Papers, De Gruyter, ISSN NO. 2191-0294, Department - BS

158. Meera Vasani “Think in Cool”, The Literary Herald – an international, refereed English e-Journal Research Papers, V.6, (6), ISSN NO. 2454-3365, Department - HSS

159. Meera Vasani “Life On-screen”, The Literary Herald – an international, refereed English e-Journal Research Papers, V.6, (6), ISSN NO. 2454-3365, Department - HSS

160. Singla, Anil Kumar; Banerjee, Mainak; Sharma, Aman; Singh, Jagtar; Bansal, Anuj; Gupta, Munish Kumar; Khanna, Navneet; Shahi, A. S.; Goyal, Deepak Kumar “Selective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments”, JOURNAL OF MANUFACTURING PROCESSES Research Papers, Elsevier, ISSN NO. 2212-4616, Department - ME

161. Aurtherson, P. Babu; Suresh Babu Rao, H.; Ganesan, S.; Bhanu Teja, N.; Vinayagam, Mohanavel; Choubey, Gautam “Production Process Optimization study on the synthesis of Manilkara zapota seed bio-oil and its characterization”, BIOMASS CONVERSION AND BIOREFINERY Research Papers, Springer, ISSN NO. 2190-6823, Department - ME

162. N Dalwadi, D Deb, SM Muyeen “A Reference Model Assisted Adaptive Control Structure for Maglev Transportation System”, Electronics Research Papers, MDPI, ISSN NO. 2079-9292, Department - EE

163. Mitchell Prajapati, Abhishek Rawat & Divyash Kumbhani “Analysis of Amplitude Scintillation and Positioning Error of IRNSS/GPS/SBAS Receiver for Heavy Rainy Days”, IETE Journal of Research  Research Papers, T&F, ISSN NO. 0974-780X, Department - EE

164. Mitchell Shivkumar Prajapati and Abhishek Rawat “Characterization of Amplitude Scintillation and Distribution of Positioning Error for IRNSS/GPS/SBAS Receiver”, Acta Geophysica Research Papers, Springer, ISSN NO. 1895-7455, Department - EE

165. M Sharma, J Tiwari, UR Acharya “Automatic Sleep-Stage Scoring in Healthy and Sleep Disorder Patients Using Optimal Wavelet Filter Bank Technique with EEG Signals”, International Journal of Environmental Research and Public Health Research Papers, MDPI, ISSN NO. 1660-4601, Department - EE

166. Qiujie Wang; Tao Jin; Mohamed A. Mohamed; Dipankar Deb “A Novel Linear Optimization Method for Section Location of Single-Phase Ground Faults in Neutral Noneffectively Grounded Systems”, IEEE Transactions on Instrumentation and Measurement  Research Papers, IEEE, ISSN NO. 1557-9662, Department - EE

167. Keyurkumar Patel and Axaykumar Mehta “Fixed time steps discrete-time sliding mode consensus protocols for two degree of freedom helicopter systems”, Transactions of the Institute of Measurement and Control Research Papers, Sage, ISSN NO. 1477-0369, Department - EE

168. M. Azizur Rahman, Navneet Khanna & et al. “Influence of Feed Rate Response (FRR) on Chip Formation in Micro and Macro Machining of Al Alloy”, Metals Research Papers, MDPI, ISSN NO. 2075-4701, Department - ME

169. Gupta, N., Ramkumar, P. L., & Abhishek, K “Material selection for rotational molding process utilizing distinguished multi criteria decision making techniques”, Matrerials Today Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - ME

170. Kishan Zadafiya, Din bandhu, Soni Kumari, Suman Chatterjee, & Kumar Abhishek “Recent trends in non-traditional machining of shape memory alloys (SMAs): A review”, CIRP Journal of Manufacturing Science and Technology Research Papers, Elsevier, ISSN NO. 1755-5817, Department - ME

171. Nikita Gupta and PL. Ramkumar “Effect of coir content on mechanical and thermal properties of LLDPE/coir blend processed by rotational molding”, Journal of Sadhana, Academy Proceedings in Engineering Sciences Research Papers, Springer, ISSN NO. 0973-7677, Department - ME

172. Subrat Kumar Swain, Jagat J. Rath and Kalyana C. Veluvolu “Neural Network Based Robust Lateral Control for an Autonomous Vehicle ”, Electronics Research Papers, MDPI, ISSN NO. 2079-9292, Department - ME

173. Manju Lata, Dileep Kumar Gupta “Simulation and performance evaluation of trans-critical CO2 refrigeration system with modified evaporative cooled finned tube gas cooler in Indian context ”, Applied Thermal Engineering  Research Papers, Elsevier, ISSN NO. 1359-4311, Department - ME

174. Gupta, Munish Kumar; Song, Qinghua; Liu, Zhanqiang; Sarikaya, Murat; Jamil, Muhammad; Mia, Mozammel; Khanna, Navneet; Krolczyk, Grzegorz M. “Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti-6Al-4V alloy”, Tribology International Research Papers, Elsevier, ISSN NO. 0301-679X, Department - ME

175. Agrawal, Chetan; Wadhwa, Jwalant; Pitroda, Anjali; Pruncu, Catalin Iulian; Sarikaya, Murat; Khanna, Navneet “Comprehensive analysis of tool wear, tool life, surface roughness, costing and carbon emissions in turning Ti-6Al-4V titanium alloy: Cryogenic versus wet machining”, Tribology International Research Papers, Elsevier, ISSN NO. 0301-679X, Department - ME

176. Shah, Prassan; Gadkari, Ameya; Sharma, Akash; Shokrani, Alborz; Khanna, Navneet “Comparison of machining performance under MQL and ultra-high voltage EMQL conditions based on tribological properties”, Tribology International Research Papers, Elsevier, ISSN NO. 0301-679X, Department - ME

177. T Patel, N Khanna, S Yadav, P Shah, “Machinability analysis of nickel-based superalloy Nimonic 90: a comparison between wet and LCO2 as a cryogenic coolant”, he International Journal of Advanced Manufacturing Technology Research Papers, Springer, ISSN NO. 1433-3015, Department - ME

178. D Shah, K Patel, M Shah “Prediction and estimation of solar radiation using artificial neural network (ANN) and fuzzy system: a comprehensive review”, International Journal of Energy and Water Resources  Research Papers, Springer, ISSN NO. 2522-0101, Department - ME

179. N Khanna, P Shah, J Wadhwa, A Pitroda, “Energy Consumption and Lifecycle Assessment Comparison of Cutting Fluids for Drilling Titanium Alloy”, Procedia CIRP  Research Papers, Elsevier, ISSN NO. 2212-8271, Department - ME

180. D Bandhu, & K Abhishek “Assessment of weld bead geometry in modified shortcircuiting gas metal arc welding process for low alloy steel”, Materials and Manufacturing Processes Research Papers, Taylor & Francis, ISSN NO. 1532-2475, Department - ME

181. P Kumar, V Rathod, AK Parwani “Experimental investigation on performance of absorbents for carbon dioxide capture from diesel engine exhaust”, Environmental Progress & Sustainable Energy Research Papers, AIChE, ISSN NO. 1944-7450, Department - ME

182. M Nama, M. Chaturvedi and others “Machine learning‐based traffic scheduling techniques for intelligent transportation system: Opportunities and challenges”, International Journal of Communication Systems Research Papers, Wiley, ISSN NO. 1099-1131, Department - ECE

183. Babbar, P., Tiwari, B., Ivanishchev, A.V. et al “Capacity Fading in Li2FeSiO4 Cathode Material: Intrinsic or Extrinsic”, Journal of Electronic Materials Research Papers, Springer, ISSN NO. 0361-5235, Department - BS

184. Sharma, Manish; Acharya, U. Rajendra “Automated detection of schizophrenia using optimal wavelet-based l(1) norm features extracted from single-channel EEG”, COGNITIVE NEURODYNAMICS Research Papers, Springer, ISSN NO. 1871-4099, Department - EE

185. R. Das, D. K. Pandey, V. Nimma, Madhusudhan P., P. Bhardwaj, P. Chandravanshi, K. M. Shameem, Dheeraj K. Singh, R. K. Kushawaha “Strong-field ionization of polyatomic molecules: Ultrafast H atom migration and bond formation in photodissociation of CH3OH ”, Faraday Discussions Research Papers, RSC, ISSN NO. 1364-5498, Department - BS

186. Du, Zhao-bo; Shen, Chi-bing; Huang, Wei; Yan, Li; Liang, Jian-han; Choubey, Gautam “Parametric study on mixing augmentation mechanism induced by cantilevered ramp injectors in a shock-induced combustion ramjet engine”, AEROSPACE SCIENCE AND TECHNOLOGY Research Papers, Elsevier, ISSN NO. 1626-3219, Department - ME

187. Abubakr, Mohamed; Hassan, Muhammed A.; Krolczyk, Grzegorz M.; Khanna, Navneet; Hegab, Hussien “Sensors selection for tool failure detection during machining processes: A simple accurate classification model”, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY Research Papers, Elsevier, ISSN NO. 1755-5817, Department - ME

188. Majumdar, Dhrubajyoti; Philip, Jessica Elizabeth; Das, Sourav; Kundu, Bidyut Kumar; Saini, Reena V.; Chandan, Gourav; Bankura, Kalipada; Mishra, Dipankar “Experimental and theoretical corroboration of antimicrobial and anticancer activities of two pseudohalides induced structurally diverse Cd (II)-Salen complexes”, Journal of Molecular Structure Research Papers, Elsevier, ISSN NO. 0022-2860, Department - BS

189. Divya Jadav, Rajib Bandyopadhyay, Nao Tsunoji, Masahiro Sadakane, Mahuya Bandyopadhyay “Post-synthetic amine functionalized SAPO-5 & SAPO-34 molecular sieves for epoxide ring opening reactions”, Matrerials Today Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - BS

190. Manoj Choudhuri “On certain orbits of geodesic flow and (a,b)(a,b)-continued fractions”, Proceedings - Mathematical Sciences Research Papers, Springer, ISSN NO. 0973-7685, Department - BS

191. Mohit Kumar & Swati Sharma “The α, β-Cut Intervals and Weakest t-Norm Based Importance Measure for Criticality Analysis in Intuitionistic Fuzzy Fault Tree Analysis of LNG-ESD System”, International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems  Research Papers, World Scientific, ISSN NO. 1793-6411, Department - BS

192. V. Kshatriya, B. Koshti, D. K. Pandey, S. Kharbanda, C. P. Kanth, Dheeraj K. Singh, D. D. Bhatia, N. Gour “Sequential and cellular detection of copper and lactic acid by disaggregation and reaggregation of the fluorescent panchromatic fibres of an acylthiourea based sensor”, Soft Matter Research Papers, RSC Pub., ISSN NO. 1744-6848, Department - BS

193. Sarikaya, Murat; Gupta, Munish Kumar; Tomaz, Italo; Danish, Mohd; Mia, Mozammel; Rubaiee, Saeed; Jamil, Mohd; Pimenov, Danil Yu; Khanna, Navneet “Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review”, JOURNAL OF MANUFACTURING PROCESSES Research Papers, Elsevier, ISSN NO. 2212-4616, Department - ME

194. Shah P., Bhat P., Khanna N. “Life cycle assessment of drilling Inconel 718 using cryogenic cutting fluids while considering sustainability parameters”, Sustainable Energy Technologies and Assessments Research Papers, Elsevier, ISSN NO. 2213-1388, Department - ME

195. Vikas Kumar Sharma, Komal Shekhawat & Christophe Chesneau “On Generating Families of Power Quantile Distributions for Modeling Waiting and Repair Times Data”, Journal of the Indian Society for Probability and Statistics Research Papers, Springer, ISSN NO. 2364-9569, Department - BS

196. S Sharma, SR Singh, M Kumar “A Reverse Logistics Inventory Model with Multiple Production and Remanufacturing Batches under Fuzzy Environment”, RAIRO-Operations Research Research Papers, EDP Scinces, ISSN NO. 1290-3868, Department - BS

197. D. K. Pandey, H. L. Kagdada, A. Materny, Dheeraj K. Singh “Hybrid Structure of Ionic Liquid and TiO2 Nanoclusters for Efficient Hydrogen Evolution Reaction”, The Journal of Physical Chemistry A Research Papers, ACS Publications, ISSN NO. 1520-5215, Department - BS

198. Huang, Wei; Wu, Han; Du, Zhao-bo; Yan, Li; Choubey, Gautam “Design exploration on the mixing augmentation induced by the oblique shock wave and a novel step in a supersonic flow”, ACTA ASTRONAUTICA Research Papers, Elsevier, ISSN NO. 1879-2030, Department - ME

199. Gupta, Munish Kumar; Song, Qinghua; Liu, Zhanqiang; Sarikaya, Murat; Jamil, Muhammad; Mia, Mozammel; Singla, Anil Kumar; Khan, Aqib Mashood; Khanna, Navneet; Pimenov, Danil Yu “Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800”, JOURNAL OF CLEANER PRODUCTION Research Papers, Elsevier, ISSN NO. 1879-1786, Department - ME

200. Shukla, Pooja; Pal, Tapan K.; Sahoo, Subash Chandra; Du, Ming-Hao; Kong, Xiang-Jian; Das, Sourav “New Family of Heptanuclear Lanthanide {Ln(7)} Clusters: Synthesis, Structure, and Magnetic Studies”, CHEMISTRYSELECT Research Papers, Chemistry Europe, ISSN NO. 2365-6549, Department - BS

201. Shah, Dipesh; Shah, Ankit; Mehta, Axaykumar “Higher order networked sliding mode controller for heat exchanger connected via data communication network”, EUROPEAN JOURNAL OF CONTROL Research Papers, Elsevier, ISSN NO. 1435-5671, Department - EE

202. Kumar, Pulkit; Parwani, Ajit K.; Gupta, Dileep Kumar; Vitankar, Vivek “Transient Cold Flow Simulation of Fast-Fluidized Bed Air Reactor with Hematite as an Oxygen Carrier for Chemical Looping Combustion”, APPLIED SCIENCES-BASEL Research Papers, MDPI, ISSN NO. 2076-3417, Department - ME

203. Gupta, Munish Kumar; Song, Qinghua; Liu, Zhanqiang; Singh, Rupinder; Sarikaya, Murat; Khanna, Navneet “Tribological behavior of textured tools in sustainable turning of nickel based super alloy”, TRIBOLOGY INTERNATIONAL Research Papers, Elsevier, ISSN NO. 1879-2464, Department - ME

204. Harsh S Dhiman; Dipankar Deb; S. M. Muyeen; Innocent Kamwa “Wind Turbine Gearbox Anomaly Detection based on Adaptive Threshold and Twin Support Vector Machines”, IEEE Transactions on Energy Conversion ( Early Access ) Research Papers, IEEE, ISSN NO. 1558-0059, Department - EE

205. Yadav, Rajiv Kumar, Kumar Abhishek, Siba Sankar Mahapatra, and Goutam Nandi “A study on machinability aspects and parametric optimization of Inconel 825 using Rao1, Rao2, Rao3 approach”, Materials Today: Proceedings Research Papers, Elsevier, ISSN NO. 2214-7853, Department - ME

206. Sharma, Manish; Dhiman, Harsh S.; Acharya, U. Rajendra “Automatic identification of insomnia using optimal antisymmetric biorthogonal wavelet filter bank with ECG signals”, COMPUTERS IN BIOLOGY AND MEDICINE Research Papers, Automatic identification of insomnia using optimal antisymmetric biorthogonal wavelet filter bank with ECG signals, ISSN NO. 1879-0534, Department - EE

1. Divya Jadav, Rajib Bandyopadhyay and Mahuya Bandyopadhyay “Synthesis of hierarchical SAPO-5 & SAPO-34 materials via postsynthetic alkali treatment and their enhanced catalytic activity in transesterification reaction”, European Journal of Inorganic Chemistry , Wiley, ISSN NO. 1099-0682, Department - Chemistry

2. Divya Jadav, Pooja Shukla, Rajib Bandyopadhyay, Yoshihiro Kubota, Sourav Das, Mahuya Bandyopadhyay “Tetranuclear Zn complex covalently immobilized on sulfopropylsilylated mesoporous silica: An efficient catalyst for ring opening reaction of epoxide with amine”, Molecular Catalysis , Science Direct, ISSN NO. 2468-8231, Department - Chemistry

3. Shukla, Pooja; Roy, Soumalya; Dolui, Dependu; Canon-Mancisidor, Walter; Das, Sourav “Pentanuclear Spirocyclic Ni(4)Ln Derivatives: Field Induced Slow Magnetic Relaxation in the Dysprosium and Erbium Analogues”, EUROPEAN JOURNAL OF INORGANIC CHEMISTRY , 2020, ISSN NO. 2020, Department - CH

4. Pramanik, Samit; Konar, Saugata; Chakraborty, Koushik; Pal, Tanusri; Das, Sourav; Chatterjee, Sudipta; Dolai, Malay; Pathak, Sudipta “Investigation of electrical conductance properties, non-covalent interactions and TDDFT calculation of a newly synthesized copper(II) metal complex”, JOURNAL OF MOLECULAR STRUCTURE , 2020, ISSN NO. 1206, Department - CH

5. Majumdar, Dhrubajyoti; Agrawal, Yashika; Thomas, Renjith; Ullah, Zakir; Santra, Manas K.; Das, Sourav; Pal, Tapan K.; Bankura, Kalipada; Mishra, Dipankar “Syntheses, characterizations, crystal structures, DFT/TD-DFT, luminescence behaviors and cytotoxic effect of bicompartmental Zn (II)-dicyanamide Schiff base coordination polymers: An approach to apoptosis, autophagy and necrosis type classical cell death”, APPLIED ORGANOMETALLIC CHEMISTRY , 2020, ISSN NO. 34, Department - CH

6. Sudhakar Chaudhary & Vimal Srivastava “Semi-discrete finite-element approximation of nonlocal hyperbolic problem”, Applicable Analysis: An International Journal , Taylor & Francis, ISSN NO. 1563-504X, Department - Maths

7. Manoj Choudhuri & C. R. E. Raja “Nilpotent Lie groups and hyperbolic automorphisms”, Archiv der Mathematik , Springer, ISSN NO. 1420-8938, Department - Maths

8. Shiv Raj Singh, Swati Sharma, Mohit Kumar “A reverse logistics model for decaying items with variable production and remanufacturing incorporating learning effects”, International Journal of Operational Research  , Inderscience Pub., ISSN NO. 1745-7653, Department - Maths

9. Mohit Kumar “Measuring Pearson s correlation coefficient of fuzzy numbers with different membership functions under weakest t-norm”, International Journal of Data Analysis Techniques and Strategies  , Inderscience Pub., ISSN NO. 1755-8069, Department - Maths

10. Mohit Kumar & Manvi Kaushik “System failure probability evaluation using fault tree analysis and expert opinions in intuitionistic fuzzy environment”, Journal of Loss Prevention in the Process Industries  , Elsevier, ISSN NO. 0950-4230, Department - Maths

11. Chesneau, Christophe; Bakouch, Hassan S.; Sharma, Vikas Kumar “A New Family of Distributions Based on a Poly-Exponential Transformation”, JOURNAL OF TESTING AND EVALUATION , JAN 2020, ISSN NO. 48, Department - MATH

12. Sharma, Vikas Kumar; Singh, Sudhanshu V.; Shekhawat, Komal “Exponentiated Teissier distribution with increasing, decreasing and bathtub hazard functions”, JOURNAL OF APPLIED STATISTICS , , ISSN NO. , Department - MATH

13. Dabhi, Prakash A. “On weighted l(p)- convergence of Fourier series: a variant of theorems of Wiener and Levy”, ADVANCES IN OPERATOR THEORY , SEP 2020, ISSN NO. 5, Department - MATH

14. Shekhawat, Komal; Sharma, Vikas Kumar “An Extension of J-Shaped Distribution with Application to Tissue Damage Proportions in Blood”, SANKHYA-SERIES B-APPLIED AND INTERDISCIPLINARY STATISTICS , , ISSN NO. , Department - MATH

15. Anirudh Nath, Dipankar Deb, & Rajeeb Dey “An augmented subcutaneous type 1 diabetic patient modelling anddesign of adaptive glucose control”, Journal of Process Control , Elsevier, ISSN NO. 0959-1524, Department - EE

16. Keyurkumar Patel and Axaykumar Mehta “Discrete-time event-triggered higher order sliding mode control for consensus of 2-DOF robotic arms”, European Journal of Control , Elsevier, ISSN NO. 0947-3580, Department - EE

17. Dipesh Shah, Axaykumar Mehta, Keyurkumar Patel and Andrzej Bartoszewicz “Event-Triggered Discrete Higher-Order SMC for Networked Control System having Network Irregularities”, IEEE Transactions on Industrial Informatics , IEEE, ISSN NO. 1941-0050, Department - EE

18. Harsh S.Dhiman, DipankarDeb “Fuzzy TOPSIS and fuzzy COPRAS based multi-criteria decision making for hybrid wind farms”, Energy , SD_Elsevier, ISSN NO. 0360-5442, Department - EE

19. Harsh S.Dhiman, Dipankar Deb, Aoife M.Foley “Bilateral Gaussian Wake Model Formulation for Wind Farms: A Forecasting based approach”, Renewable and Sustainable Energy Reviews , SD_Elsevier, ISSN NO. 1364-0321, Department - EE

20. Dharmendra Sadhwani and Ram Narayan Yadav “A Comprehensible Form of the Product of Two Gaussian Q Functions and its Usefulness in κ−μ Shadowed Fading Distribution”, Journal of the Franklin Institute , Elsevier, ISSN NO. 0016-0032, Department - EE

21. Nidhi Yadav, Kshitij Bhargava, Nikita Kumari, Shyam S.Pandey & VipulSingh “Comparative analysis of metal diffusion effects in polymer films coated with spin coating and floating film transfer techniques”, Synthetic Metals , SD_Elsevier, ISSN NO. 0379-6779, Department - EE

22. Mitchell Prajapati & Abhishek Rawat “Performance analysis of IRNSS using compact microstrip patch antenna for S band application”, Acta Geophysica , Springer, ISSN NO. 1895-7455, Department - EE

23. Rushi Jani and Kshitij Bhargava “Comparative investigation into effects of the interplay between absorber layer crystallinity and interfacial defect states on the performance of lead-based and tin-based perovskite solar cells”, Semiconductor Science and Technology , IOP Publishing, ISSN NO.  0268-1242, Department - EE

24. Sharma, Manish; Patel, Sohamkumar; Acharya, U. Rajendra “Automated detection of abnormal EEG signals using localized wavelet filter banks”, PATTERN RECOGNITION LETTERS , 2020, ISSN NO. , Department - EE

25. Sharma, Manish; Tan, Ru-San; Acharya, U. Rajendra “Detection of shockable ventricular arrhythmia using optimal orthogonal wavelet filters”, NEURAL COMPUTING & APPLICATIONS , 2020, ISSN NO. , Department - EE

26. Sharma, Manish; Patel, Sohamkumar; Choudhary, Siddhant; Acharya, U. Rajendra “Automated Detection of Sleep Stages Using Energy-Localized Orthogonal Wavelet Filter Banks”, ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , 2020, ISSN NO. , Department - EE

27. Dhiman, Harsh S.; Deb, Dipankar; Foley, Aoife M. “Lidar assisted wake redirection in wind farms: A data driven approach”, RENEWABLE ENERGY , 2020, ISSN NO. , Department - EE

28. Rajput, Jaypal Singh; Sharma, Manish; Tan, Ru San; Acharya, U. Rajendra “Automated detection of severity of hypertension ECG signals using an optimal bi-orthogonal wavelet filter bank”, COMPUTERS IN BIOLOGY AND MEDICINE , 2020, ISSN NO. , Department - EE

29. Deb, Dipankar; Patel, Ravi; Balas, Valentina E. “A Review of Control-Oriented Bioelectrochemical Mathematical Models of Microbial Fuel Cells”, PROCESSES , 2020, ISSN NO. , Department - EE

30. Deb, Dipankar “Intelligent decision making device for residue incorporation in soil or biomass power plants”, JOURNAL OF INTELLIGENT & FUZZY SYSTEMS , 2020, ISSN NO. , Department - EE

31. Ranjan, Abhash; Kaushik, Mrinal; Deb, Dipankar; Muresan, Vlad; Unguresan, Mihaela “Assessment of Short Rectangular-Tab Actuation of Supersonic Jet Mixing”, ACTUATORS , 2020, ISSN NO. , Department - EE

32. Dhiman, Harsh S.; Deb, Dipankar “Wake management based life enhancement of battery energy storage system for hybrid wind farms”, RENEWABLE & SUSTAINABLE ENERGY REVIEWS , 2020, ISSN NO. , Department - EE

33. Nath, Anirudh; Deb, Dipankar; Dey, Rajeeb “Robust observer-based adaptive control of blood glucose in diabetic patients”, INTERNATIONAL JOURNAL OF CONTROL , 2020, ISSN NO. , Department - EE

34. Jana, Tamal; Kaushik, Mrinal; Deb, Dipankar; Muresan, Vlad; Unguresan, Mihaela “Aerodynamic Studies on Non-Premixed Oxy-Methane Flames and Separated Oxy-Methane Cold Jets”, PROCESSES , 2020, ISSN NO. , Department - EE

35. Dhok, Shivani; Pimpalkhute, Varad; Chandurkar, Ambarish; Bhurane, Ankit A.; Sharma, Manish; Acharya, U. Rajendra “Automated phase classification in cyclic alternating patterns in sleep stages using Wigner-Ville Distribution based features”, COMPUTERS IN BIOLOGY AND MEDICINE , 2020, ISSN NO. , Department - EE

36. Bhati, Dinesh; Pachori, Ram Bilas; Sharma, Manish; Gadre, Vikram M. “Automated Detection of Seizure and Nonseizure EEG Signals Using Two Band Biorthogonal Wavelet Filter Banks”, BIOMEDICAL SIGNAL PROCESSING: ADVANCES IN THEORY, ALGORITHMS AND APPLICATIONS , 2020, ISSN NO. , Department - EE

37. Patel, Ravi; Deb, Dipankar; Dey, Rajeeb; Balas, Valentina E. “Adaptive Control of Single Chamber Two-Population MFC”, ADAPTIVE AND INTELLIGENT CONTROL OF MICROBIAL FUEL CELLS , 2020, ISSN NO. , Department - EE

38. Patel, Ravi; Deb, Dipankar; Dey, Rajeeb; Balas, Valentina E. “Microbial Fuel Cell Laboratory Setup”, ADAPTIVE AND INTELLIGENT CONTROL OF MICROBIAL FUEL CELLS , 2020, ISSN NO. , Department - EE

39. Dhiman, Harsh S.; Deb, Dipankar; Carroll, James; Muresan, Vlad; Unguresan, Mihaela-Ligia “Wind Turbine Gearbox Condition Monitoring Based on Class of Support Vector Regression Models and Residual Analysis”, SENSORS , 2020, ISSN NO. , Department - EE

40. Bhalarao, Raghavendra; Raval, Mitesh “Automated tabla syllable transcription using image processing techniques”, MULTIMEDIA TOOLS AND APPLICATIONS , 2020, ISSN NO. , Department - EE

41. Upadhyay, Jatin; Rawat, Abhishek; Deb, Dipankar; Muresan, Vlad; Unguresan, Mihaela-Ligia “An RSSI-Based Localization, Path Planning and Computer Vision-Based Decision Making Robotic System”, ELECTRONICS , 2020, ISSN NO. , Department - EE

42. Upadhyay, Abhay; Sharma, Manish; Pachori, Ram Bilas; Sharma, Rajeev “A Nonparametric Approach for Multicomponent AM-FM Signal Analysis”, CIRCUITS SYSTEMS AND SIGNAL PROCESSING , 2020, ISSN NO. , Department - EE

43. Baldha, Piyush; Patel, Krunal; Bhargava, Kshitij “Investigation on the Relative Influence of Absorber Layer Defect States Over Performance of Pb-Based and Sn-Based Perovskite Solar Cells”, RENEWABLE ENERGY AND CLIMATE CHANGE , 2020, ISSN NO. , Department - EE

44. Varmora, Tarang; Kumar, Manish; Rajendra, Shah Krupa “Design and Optimization of Hybrid Electric Vehicle”, RENEWABLE ENERGY AND CLIMATE CHANGE , 2020, ISSN NO. , Department - EE

45. Patel, Ravi; Deb, Dipankar; Dey, Rajeeb; Balas, Valentina E. “Mathematical Modelling”, ADAPTIVE AND INTELLIGENT CONTROL OF MICROBIAL FUEL CELLS , 2020, ISSN NO. , Department - EE

46. Patel, Ravi; Deb, Dipankar; Dey, Rajeeb; Balas, Valentina E. “Model Analysis of Single Population Single Chamber MFC”, ADAPTIVE AND INTELLIGENT CONTROL OF MICROBIAL FUEL CELLS , 2020, ISSN NO. , Department - EE

47. Patel, Ravi; Deb, Dipankar; Dey, Rajeeb; Balas, Valentina E. “Robust Control Design of SPSC Microbial Fuel Cell with Norm Bounded Uncertainty”, ADAPTIVE AND INTELLIGENT CONTROL OF MICROBIAL FUEL CELLS , 2020, ISSN NO. , Department - EE

48. Patel, Ravi; Deb, Dipankar; Dey, Rajeeb; Balas, Valentina E. “Introduction to Adaptive Control”, ADAPTIVE AND INTELLIGENT CONTROL OF MICROBIAL FUEL CELLS , 2020, ISSN NO. , Department - EE

49. Patel, Ravi; Deb, Dipankar; Dey, Rajeeb; Balas, Valentina E. “Adaptive Control of Single Population Single Chamber MFC”, ADAPTIVE AND INTELLIGENT CONTROL OF MICROBIAL FUEL CELLS , 2020, ISSN NO. , Department - EE

50. Patel, Ravi; Deb, Dipankar; Dey, Rajeeb; Balas, Valentina E. “Exact Linearization of Two Chamber Microbial Fuel Cell”, ADAPTIVE AND INTELLIGENT CONTROL OF MICROBIAL FUEL CELLS , 2020, ISSN NO. , Department - EE

51. Patel, Ravi; Deb, Dipankar; Dey, Rajeeb; Balas, Valentina E. “Model Reference Adaptive Control of Microbial Fuel Cells”, ADAPTIVE AND INTELLIGENT CONTROL OF MICROBIAL FUEL CELLS , 2020, ISSN NO. , Department - EE

52. 3. Dinbandhu, Prajapati, V., Vora, J.J., Das, S. and Abhishek, K., “Experimental studies of Regulated Metal Deposition (RMD™) on ASTM A387 (11) steel: study of parametric influence and welding performance optimization”, Journal of the Brazilian Society of Mechanical Sciences and Engineering , Springer, ISSN NO. 1806-3691, Department - ME

53. Sumit Tripathi, Rico F.Tabor, Ramesh Singh, & Amitabh Bhattacharya “Experimental studies on pipeline transportation of high internal phase emulsions using water-lubricated core-annular flow method”, Chemical Engineering Science , Elsevier, ISSN NO. 0009-2509, Department - ME

54. Vishalkumar Prajapati, Dinbandhu, Jay J. Vora, Subhash Das & Kumar Abhishek “Study of parametric influence and welding performance optimization duringregulated metal deposition (RMD™) using grey integrated with fuzzy taguchiapproach”, Journal of Manufacturing Processes , Elsevier, ISSN NO. 1526-6125, Department - ME

55. Rajput, Chetansingh, Soni Kumari, Vishalkumar Prajapati, Dinbandhu and Kumar Abhishek “Experimental investigation on peel strength during ultrasonic welding of polypropylene H110MA”, Materials Today: Proceedings , Elsevier, ISSN NO. 2214-7853, Department - ME

56. Kumari, Soni, Pankaj Sonia, Bharat Singh, Kumar Abhishek, and Kuldeep K. Saxena “Optimization of surface roughness in EDM of pure magnesium (Mg) using TLBO”, Materials Today: Proceedings , Elsevier, ISSN NO. 2214-7853, Department - ME

57. Tripathi, D.R., Vachhani, K.H., Kumari, S. Dinbandhu and Abhishek, K “Experimental investigation on material removal rate during abrasive water jet machining of GFRP composites”, Materials Today: Proceedings , Elsevier, ISSN NO. 2214-7853, Department - ME

58. Singh, M.A.; Joshi, K.; Hanzel, O.; Sajgalík, P.; Marla, D. “Identification of wire electrical discharge machinability of SiC sintered using rapid hot pressing technique”, Ceramics International , Elsevier, ISSN NO. 0272-8842, Department - ME

59. Chetan Agrawal, Navneet Khanna, Munish Kumar Gupta, Yusuf Kaynak “Sustainability assessment of in-house developed environment-friendly hybrid techniques for turning Ti-6Al-4V”, Sustainable Materials and Technologies , Elsevier, ISSN NO. 2214-9937, Department - ME

60. Munish Kumar Gupta, Anil Kumar Singla, Hansong Ji, Qinghua Song, Zhanqiang Liu, Wentong Cai, Mozammel Mia, Navneet Khanna, Grzegorz M Krolczyk “Impact of layer rotation on micro-structure, grain size, surface integrity and mechanical behaviour of SLM Al-Si-10Mg alloy”, Journal of Materials Research and Technology , Elsevier, ISSN NO. 2238-7854, Department - ME

61. Navneet Khanna, Prassan Shah, Radoslaw W Maruda, Grzegorz M Krolczyk, Hussien Hegab “Experimental investigation and sustainability assessment to evaluate environmentally clean machining of 15-5 PH stainless steel”, Journal of Manufacturing Processes , Elsevier, ISSN NO. 1526-6125, Department - ME

62. Navneet Khanna, Prassan Shah, Narendra Mohan Suri, Chetan Agrawal, Sandeep K Khatkar, Franci Pusavec, Murat Sarikaya “Application of Environmentally-friendly Cooling/Lubrication Strategies for Turning Magnesium/SiC MMCs”, Silicon , Springer, ISSN NO. 1876-9918, Department - ME

63. Jay Airao, Navneet Khanna, Anish Roy, Hussien Hegab “Comprehensive experimental analysis and sustainability assessment of machining Nimonic 90 using ultrasonic-assisted turning facility”, The International Journal of Advanced Manufacturing Technology , Springer, ISSN NO. 1433-3015, Department - ME

64. Manju Lata, Rishabh Yadav, Dileep Kumar Gupta “Simulation and Performance Evaluation of CO2Booster System Integrated with Modified Evaporative Cooling for Supermarket Application in India”, Jordan Journal of Mechanical and Industrial Engineering , Jordan Journal of Mechanical and Industrial Engineering (JJMIE) , ISSN NO. 1995-6665, Department - ME

65. Manju Lata, Dileep Kumar Gupta “Performance evaluation and comparative analysis of trans-critical CO2 booster refrigeration systems with modified evaporative cooled gas cooler for supermarket application in Indian context”, International Journal of Refrigeration , Elsevier, ISSN NO. 0140-7007, Department - ME

66. Shah, P., Khanna, N., Zadafiya, K., Bhalodiya, M., Maruda, R.W., Krolczyk, G.M. “In-house development of eco-friendly lubrication techniques (EMQL, Nanoparticles+EMQL and EL) for improving machining performance of 15–5 PHSS”, Tribology International , Elsevier, ISSN NO. 0301-679X, Department - ME

67. Zhixiong Li, R.Moradi, Seyed Maziar Marashi, Houman Babazadeh, Gautam Choubey “Influence of backward-facing step on the mixing efficiency of multi microjets at supersonic flow”, Acta Astronautica , Elsevier, ISSN NO. 0094-5765, Department - ME

68. Khanna, N., Agrawal, C., Gupta, M.K., Song, Q., Singla, A.K. “Sustainability and machinability improvement of Nimonic-90 using indigenously developed green hybrid machining technology”, Journal of Cleaner Production , Elsevier, ISSN NO. 0959-6526, Department - ME

69. PL. Ramkumar, Dhruv Panchal, Yash Panchal, Nikita Gupta “Characterization of LLDPE/coir blend using FTIR technique”, Matrerials Today Proceedings , Elsevier, ISSN NO. 2214-7853, Department - ME

70. Nikita Gupta, PL. Ramkumar & Vrushang Sangani “An approach toward augmenting materials, additives, processability and parameterization in rotational molding: a review”, Materials and Manufacturing Processes , Taylor & Francis, ISSN NO. 1532-2475, Department - ME

71. Nikita Gupta, PL. Ramkumar “Experimental investigation of linear low density polyethylene composites based on coir for rotational molding process”, Polymers & Polymer Composite , Sage, ISSN NO. 1478-2391, Department - ME

72. Khanna, Navneet; Pusavec, Franci; Agrawal, Chetan; Krolczyk, Grzegorz M. “Measurement and evaluation of hole attributes for drilling CFRP composites using an indigenously developed cryogenic machining facility”, MEASUREMENT , MAR 15 2020, ISSN NO. , Department - ME

73. Khanna, Navneet; Agrawal, Chetan; Gupta, Munish Kumar; Song, Qinghua “Tool wear and hole quality evaluation in cryogenic Drilling of Inconel 718 superalloy”, TRIBOLOGY INTERNATIONAL , MAR 2020, ISSN NO. , Department - ME

74. Maruda, Radoslaw W.; Krolczyk, Grzegorz M.; Wojciechowski, Szymon; Powalka, Bartosz; Klos, Slawomir; Szczotkarz, Natalia; Matuszak, Marcin; Khanna, Navneet “Evaluation of turning with different cooling-lubricating techniques in terms of surface integrity and tribologic properties”, TRIBOLOGY INTERNATIONAL , AUG 2020, ISSN NO. , Department - ME

75. Khanna, Navneet; Shah, Prassan; Agrawal, Chetan; Pusavec, Franci; Hegab, Hussien “Inconel 718 machining performance evaluation using indigenously developed hybrid machining facilities: experimental investigation and sustainability assessment”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , FEB 2020, ISSN NO. , Department - ME

76. Khanna, Navneet; Shah, Prassan; Chetan “Comparative analysis of dry, flood, MQL and cryogenic CO2 techniques during the machining of 15-5-PH SS alloy”, TRIBOLOGY INTERNATIONAL , JUN 2020, ISSN NO. , Department - ME

77. Choubey, Gautam; Yuvarajan, D.; Huang, Wei; Yan, Li; Babazadeh, Houman; Pandey, K. M. “Hydrogen fuel in scramjet engines - A brief review”, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , JUN 24 2020, ISSN NO. , Department - ME

78. Shah, Prassan; Khanna, Navneet; Chetan “Comprehensive machining analysis to establish cryogenic LN2 and LCO2 as sustainable cooling and lubrication techniques”, TRIBOLOGY INTERNATIONAL , AUG 2020, ISSN NO. , Department - ME

79. Khanna, Navneet; Agrawal, Chetan; Dogra, Manu; Pruncu, Catalin Iulian “Evaluation of tool wear, energy consumption, and surface roughness during turning of inconel 718 using sustainable machining technique”, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , MAY-JUN 2020, ISSN NO. , Department - ME

80. Devarajan, Yuvarajan; Munuswamy, DineshBabu; Nagappan, Beemkumar; Choubey, Gautam “Study on the effect on combining long-chain additive with neat bio-diesel fueled engine to examine its ignition characteristics”, FUEL , NOV 1 2020, ISSN NO. , Department - ME

81. Devarajan, Yuvarajan; Choubey, Gautam; Sellappan, Sivasaravanan; Muniraj, Sunil Kumar; Pillai, Booma Devi Perumal “Emission study on the effect of ignition improver in diesel fueled engine”, PETROLEUM SCIENCE AND TECHNOLOGY , JUN 17 2020, ISSN NO. , Department - ME

82. Choubey, Gautam; Yuvarajan, Devarajan; Huang, Wei; Shafee, Ahmad; Pandey, K. M. “Recent research progress on transverse injection technique for scramjet applications-a brief review”, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , OCT 16 2020, ISSN NO. , Department - ME

83. Khanna, Navneet; Suri, Narendra M.; Shah, Prassan; Hegab, Hussien; Mia, Mozammel “Cryogenic turning of in-house cast magnesium based MMCs: A comprehensive investigation”, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , JUL-AUG 2020, ISSN NO. , Department - ME

84. Bhat, Prathamesh; Agrawal, Chetan; Khanna, Navneet “Development of a Sustainability Assessment Algorithm and Its Validation Using Case Studies on Cryogenic Machining”, JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING , JUN 2020, ISSN NO. , Department - ME

85. Maji, Ambarish; Choubey, Gautam “Improvement of heat transfer through fins: A brief review of recent developments”, HEAT TRANSFER , MAY 2020, ISSN NO. , Department - ME

86. Markopoulos, Angelos P.; Karkalos, Nikolaos E.; Mia, Mozammel; Pimenov, Danil Yurievich; Gupta, Munish Kumar; Hegab, Hussein; Khanna, Navneet; Balogun, Vincent Aizebeoje; Sharma, Shubham “Sustainability Assessment, Investigations, and Modelling of Slot Milling Characteristics in Eco-Benign Machining of Hardened Steel”, METALS , DEC 2020, ISSN NO. , Department - ME

87. Lata, Manju; Purohit, Nilesh; Gupta, Dileep Kumar “Techno-economic assessment of trans-critical CO2 booster system with modified evaporative cooling for supermarket application in Indian context”, ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY , , ISSN NO. , Department - ME

88. Liu, Xinglong; Moradi, R.; Tran Dinh Manh; Choubey, Gautam; Li, Zhixiong; Quang-Vu Bach “Computational study of the multi hydrogen jets in presence of the upstream step in a Ma=4 supersonic flow”, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , NOV 6 2020, ISSN NO. , Department - ME

89. Chadaram, Srinivasu; Yadav, Saurabh Kumar “A XFEM approach for the three-dimensional cracks in piezoelectric material using interaction integral”, ENGINEERING FRACTURE MECHANICS , NOV 2020, ISSN NO. , Department - ME

90. Jaiswal, Anand Prakash; Khanna, Navneet; Bajpai, Vivek “Orthogonal machining of Heat Treated Ti-10-2-3: FE and Experimental”, MATERIALS AND MANUFACTURING PROCESSES , DEC 9 2020, ISSN NO. , Department - ME

91. Agrawal, Chetan; Khanna, Navneet; Pruncu, Catalin Iulian; Singla, Anil Kumar; Gupta, Munish Kumar “Tool wear progression and its effects on energy consumption and surface roughness in cryogenic assisted turning of Ti-6Al-4V”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , NOV 2020, ISSN NO. , Department - ME

92. Banerjee, Prabas; Hui, Nirmal Baran; Dikshit, Mithilesh K.; Laha, Rupam; Das, Sandeep “Modelling and optimization of mean thickness of backward flow formed tubes using regression analysis, particle swarm optimization and neural network”, SN APPLIED SCIENCES , JUL 8 2020, ISSN NO. , Department - ME

93. Chatterjee, Suman; Mahapatra, Siba Sankar; Abhishek, Kumar “Experimental Evaluation for Improving Multiple Quality Characteristics of Drilled Holes: A Case Study on Drilling of Ti6Al4V”, JOURNAL OF ADVANCED MANUFACTURING SYSTEMS , MAR 2020, ISSN NO. , Department - ME

94. Patel, Tej; Yadav, Sahitya; Raj, Zeel; Shah, Prassan; Khanna, Navneet “Analysis of machining performance of AISI 420 stainless steel using conventional and ultrasonic assisted turning”, MATERIALS TODAY-PROCEEDINGS , 2020, ISSN NO. , Department - ME

95. Khanna, Navneet; Bharati, Mahesh; Sharma, Prachi; Badheka, Vishvesh J. “Design-of-experiments application in the friction stir welding of aluminium alloy AA 8011-h14 for structural application”, MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES , APR 14 2020, ISSN NO. , Department - ME

96. Himanshu Sharma & Zulfequar Ahmad “Turbulence characteristics offlow past submerged vanes”, International Journal of Sediment Research  , Elsevier, ISSN NO. 1001-6279, Department - CE

97. Manish Pandey, Manousos Valyrakis, Meilan Qi, Anurag Sharma, & Ajay Singh Lodhi “Experimental assessment and prediction of temporal scour depth around a spur dike”, International Journal of Sediment Research , Elsevier, ISSN NO. 1001-6279, Department - CE

98. Wanare, R.; Shetty, R.; Jayanthi, P.; Singh, D.; Iyer, K. “Investigation to Quantify Suction Characteristics of Marine Soil during Drying and Wetting Cycles ”, Geotechnical Testing Journal , ASTM International, ISSN NO. 0149-6115, Department - CE

99. Solanki, Karan; Sharma, Himanshu; Joshi, Nitin “Flow and parameter optimization of tapered vane”, Journal of Ecohydraulics , Taylor & Francis, ISSN NO. 2470-5365, Department - CE

100. Mihir Fadadu, Nikulkumar Vadher, Vivekkumar Trivedi, Mahesh Mungule and Kannan K.R.Iyer “A comparative study on stress-strain response and associated hysteresis for conventional and PET macro-reinforced concrete”, Construction and Building Materials , Elsevier, ISSN NO. 0950-0618, Department - CE

101. Gore, Ninad; Dave, Sanjay; Shah, Jiten; Jain, Manish; Rathva, Dipak; Garg, Vinay “Comparative Analysis of Pedestrian Walking Speed on Sidewalk and Carriageway”, TRANSPORTATION RESEARCH , 2020, ISSN NO. , Department - CE

102. Kapil Sharma, Ram Narayan Yadav “An adaptive, fault tolerant, flow-level routing scheme for data center networks”, Computer Networks , Elsevier, ISSN NO. 1389-1286, Department - CS

103. Rajput, Pruthvish; Chaturvedi, Manish; Patel, Vivek “Opportunistic sensing based detection of crowdedness in public transport buses”, PERVASIVE AND MOBILE COMPUTING , OCT 2020, ISSN NO. 2020, Department - CS

104. Khatri, Sahil; Vachhani, Hrishikesh; Shah, Shalin; Bhatia, Jitendra; Chaturvedi, Manish; Tanwar, Sudeep; Kumar, Neeraj “Machine learning models and techniques for VANET based traffic management: Implementation issues and challenges”, PEER-TO-PEER NETWORKING AND APPLICATIONS , , ISSN NO. 2020, Department - CS

105. J. Plaickner, E. Speiser, S. Chandola, N. Esser, Dheeraj K. Singh “Adsorption of Toluene-3,4-dithiol on Silver Islands Investigated by Surface-Enhanced Raman Spectroscopy ”, Journal of Raman Spectroscopy , Wiley, ISSN NO. 1097-4555, Department - PH

106. H Kagdada, P K. Jha, P Śpiewak, K.J. Kurzydłowski, and Dheeraj K. Singh “Pressure-induced first order phase transition in bulk GeSe”, Journal of Applied Physics , AIP, ISSN NO. 1089-7550, Department - PH

107. P. Sanchora, DK Pandey, H. Kagdada, A. Materny, Dheeraj K. Singh “Impact of Alkyl Chain Length and Water on the Structure and Properties of 1-alkyl-3-methylimidazolium Chloride Ionic Liquids ”, Phys. Chem. Chem. Phys , RSC, ISSN NO. 1463-9084, Department - PH

108. D. Majumdar, S Dey, D Das, Dheeraj K. Singh, S. Das, K. Bankura, D. Mishra “A rare hetero-bimetallic Zn(II)/Ca(II) Schiff base complex: Synthesis, crystal structure, DFT, molecular docking and unveiling antimicrobial activity”, Journal of Molecular Structure , Elsevier, ISSN NO. 0022-2860, Department - PH

109. H L. Kagdada, S.K Gupta, S Sahoo, Dheeraj K. Singh “Rashba Splitting in Two Dimensional Hybrid Perovskite Materials for High Efficient Solar and Heat Energy Harvesting ”, JPC Letter , ACS, ISSN NO. 1948-7185, Department - PH

110. B Roondhe, V Sharma, H.L. Kagdada, Dheeraj K. Singh,T.S. Dasgupta, R. Ahuja “Enhancing the electronic and phonon transport properties of two-dimensional hexagonal boron nitride through oxygenation: A first principles study”, Applied Surface Science , Elsevier, ISSN NO. 0169-4332, Department - PH

111. D Majumdar, Dheeraj K Singh, DK Pandey, D Parai, K Bankura, D Mishra “DFT investigations of linear Zn3-type complex with compartmental N/O-donor Schiff base: Synthesis, characterizations, crystal structure, fluorescence and molecular docking”, Journal of Molecular Structure , Elsevier, ISSN NO. 0022-2860, Department - PH

112. Ambesh Dixit, Brajesh Tiwari, B. Ramachandran, R. Naik “Onset of inverse magnetocaloric effect in multiferroic FeVO4 below the antiferromagnetic transition temperature TN1”, Journal of Magnetism and Magnetic Materials  , Elsevier, ISSN NO. 0304-8853, Department - PH

113. Brajesh Tiwari, Ambesh Dixit, M. S. Ramachandra Rao “Magnetic entropy change in a non-collinear weak ferromagnetic YCrO3”, Vacuum , Elsevier, ISSN NO. 0042-207X, Department - PH

114. Brajesh Tiwari, Ambesh Dixit, M. S. Ramachandra Rao “Anomalous magnetic behavior and complex magnetic structure of proximate LaCrO3—LaFeO3 system”, Materials Research Express  , IOP Science, ISSN NO. 2053-1591, Department - PH

115. Raja Das, R. Prabhu, N. Venkataramani, Shiva Prasad at el. “Giant low-field magnetocaloric effect and refrigerant capacity in reduced dimensionality EuTiO3 multiferroics”, Journal of Alloys and Compounds  , Elsevier, ISSN NO. 0925-8388, Department - PH

116. B.N. Sahu, S.C. Sahoo, N. Venkataramani, Shiva Prasad, R. Krishnan “Observation of extraordinarily large magnetization in CoFe2O4/ ZnFe2O4 bilayers”, Journal of Magnetism and Magnetic Materials  , Elsevier, ISSN NO. 0304-8853, Department - PH

117. Kagdada, Hardik L.; Dabhi, Shweta D.; Mankad, Venu; Shinde, Satyam M.; Jha, Prafulla K. “First principles study on small ZrAln and HfAln clusters: Structural, stability, electronic states and CO2 adsorption”, MATERIALS CHEMISTRY AND PHYSICS , JAN 1 2020, ISSN NO. , Department - PH

118. Parashram Patil, Pravin Jadhav & Moinak Maiti “The impact of new agricultural export policy on Indianagriculture exports”, Journal of Public Affairs , Wiley, ISSN NO. 1479-1854, Department - HSS

119. Bandhu, Din & Priya, Himanshi & Jadhav, Pravin “Consideration of Ethical Norms and Practices in Research. ”, Studies in Indian Place Names (UGC Care Journal) , JTA Multidisciplinary International Conference 2020, ISSN NO. --, Department - HSS

120. Jadhav, Pravin & Bandhu, Din & Patil, Parashram “Relationship between Foreign Direct Investment in Infrastructure and Economic Growth: Evidences from Indian Economy”, 7th Biennial International Conference on Energy and Infrastructure Management (ICEIM-2020) , PDPU, Gujarat, ISSN NO. --, Department - HSS

121. Avery Miller, Andrzej Pelc, Ram Narayan Yadav “Deterministic Leader Election in Anonymous Radio Networks”, Association for Computing Machinery , ACM, ISSN NO. 78-1-4503-6935-0/20/07., Department - CSE

122. Shah, Bhavin, Harsh Lakhani, Kumar Abhishek, and Soni Kumari “Application of Fuzzy Linguistic Modeling Aggregated with VIKOR for Optimal Selection of Solar Power Plant Site: An Empirical Study”, Renewable Energy and Climate Change , Smart Innovation, Systems and Technologies (Springer), ISSN NO. 978-981-32-9578-0, Department - ME

123. Manju Lata, and Dileep Kumar Gupta “Experimental Investigation and Simulation of Modified Evaporative Cooling System”, Advances in Mechanical Engineering (2020) , Springer, ISSN NO. 978-981-15-3639-7, Department - ME

124. Manju Lata, Ashish Kumar Yadav, and Dileep Kumar Gupta “Thermodynamic Analysis of Transcritical CO2 Booster Systems with Flooded Evaporator for Supermarket Application ”, Renewable Energy and Climate Change , Springer, ISSN NO. 978-981-32-9578-0, Department - ME

125. Gupta N., PL. Ramkumar “Analysis of Synthetic Fiber-Reinforced LLDPE Based on Melt Flow Index for Rotational Molding”, Advances in Lightweight Materials and Structures , Springer Proceedings in Materials, vol 8, ISSN NO. 978-981-15-7827-4, Department - ME

126. Parwani, Ajit Kumar, PL, Ramkumar (Eds.) “Recent Advances in Mechanical Infrastructure Proceedings of ICRAM 2019”, Lecture Notes in Intelligent Transportation and Infrastructure (Springer) , Lecture Notes in Intelligent Transportation and Infrastructure (Springer), ISSN NO. 978-981-329-970-2, Department - ME

127. Dipankar Deb, Ambesh Dixit & Laltu Chandra “Renewable Energy and Climate Change (Proceedings of REC 2019)”, Smart Innovation, Systems and Technologies (Springer Series 161) , Smart Innovation, Systems and Technologies (Springer Series 161), ISSN NO. 978-981-329-577-3, Department - EE

128. Mehta, Axaykumar, Rawat, Abhishek, Chauhan, Priyesh (Eds.) “Recent Advances in Communication Infrastructure Proceedings of ICPCCI 2019”, Lecture Notes in Electrical Engineering (Springer) , Lecture Notes in Electrical Engineering (Springer), ISSN NO. 978-981-15-0974-2, Department - EE

129. Harsh Dhiman, Dipankar Deb & Valentina Emilia Balas “Supervised Machine Learning in Wind Forecasting and Ramp Event Prediction”, Academic Press (Elsevier) , Academic Press (Elsevier), ISSN NO. 9780128213674, Department - EE

130. Sharma, H., Suryavanshi, S., and Joshi, N. “Wavelet transform based trend analysis of drought variables over homogenous monsoon regions of India.”, Advances in hydrology and climate change , Apple Press, Taylor and Francis, ISSN NO. 978-1-774-91030-6, Department - CE

131. Solanki, K., and Sharma, H. “Flow pattern around multiple tapered vane arrangement”, Advances in hydrology and climate change , Apple Press, Taylor and Francis, ISSN NO. 978-1-774-91030-6, Department - CE

1. Atanu Dey, Sourav Das, Valeriu Mereacre, Annie K. Powell & Vadapalli Chandrasekhar “Butterfly-Shaped, Heterometallic, Hexanuclear, [FeIII2LnIII4] (LnIII = GdIII, TbIII, DyIII and HoIII) Complexes: Syntheses, Structure and Magnetism”, Inorganica Chimica Acta  J, Elsevier, ISSN NO. 0020-1693, Department - Chemistry

2. Mahuya Bandyopadhyay, Divya Jadav,Nao Tsunoji,Tsuneji Sano & Masahiro Sadakane “Immobilizaion of Preyssler type heteropoly acids on siliceous mesporous supports and their catalytic activities in the dehydration of ethanol”, Reaction Kinetics, Mechanisms and Catalysis J, Springer, ISSN NO. 1878-5204, Department - Chemistry

3. Majumdar, D., Das, S., Thomas, R., Ullah, Z., Sreejith, S.S., Das, D., Shukla, P., Bankura, K., Mishra, D. “Syntheses, X-ray crystal structures of two new Zn(II)-dicyanamide complexes derived from H2vanen-type compartmental ligands: Investigation of thermal, photoluminescence, in vitro cytotoxic effect and DFT-TDDFT studies”, Inorganica Chimica Acta J, Science Direct, ISSN NO. 0020-1693, Department - Chemistry

4. Shukla, P., Metre, R.K., Du, M.-H., Kong, X.-J., Das, S. “[5×1 + 1×1] Hexanuclear Lanthanide(III) Cocrystal Complexes: Syntheses, Structures, and Magnetic Properties”, European Journal of Inorganic Chemistry J, Wiley, ISSN NO. 1099-0682, Department - Chemistry

5. Majumdar, D., Das, D., Sreejith, S.S., Das, S., Kumar Biswas, J., Mondal, M., Ghosh, D., Bankura, K., Mishra, D. “Dicyanamide-interlaced assembly of Zn(II)-schiff-base complexes derived from salicylaldimino type compartmental ligands: Syntheses, crystal structures, FMO, ESP, TD-DFT, fluorescence lifetime, in vitro antibacterial and anti-biofilm properties”, Inorganica Chimica Acta J, Science Direct, ISSN NO. 0020-1693, Department - Chemistry

6. Mohit Kumar “Evaluation of the intuitionistic fuzzy importance of attributes based on the correlation coefficient under weakest triangular norm and application to the hotel services”, Journal of Intelligent & Fuzzy Systems J, IOS Press, ISSN NO. 1064-1246, Department - Maths

7. Vikas Kumar Sharma & Sanku Dey “Estimation of reliability of multicomponent stress-strength inverted exponentiated Rayleigh model”, ournal of Industrial and Production Engineering J, Taylor & Francis, ISSN NO. 2168-1023, Department - Maths

8. Sudhanshu V. Singh & Vikas Kumar Sharma “The location-scale family of generalized Maxwell distributions: theory and applications to annual rainfall records”, International Journal of System Assurance Engineering and Management J, Springer, ISSN NO. 0976-4348, Department - Maths

9. Mohit Kumar “A Novel Weakest t-Norm based Fuzzy Importance Measure for Fuzzy Fault Tree Analysis of Combustion Engineering Reactor Protection System”, International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems  J, World Scientific, ISSN NO. 1793-6411, Department - Maths

10. S Kabir, TK Geok, Mohit Kumar, M Yazdi, F Hossain “A Method for Temporal Fault Tree Analysis Using Intuitionistic Fuzzy Set and Expert Elicitation”, IEEE ACCESS J, IEEE, ISSN NO. 2169-3536, Department - Maths

11. Shaikh, A., Mishra, P. “Optimal Policies for Price Sensitive Quadratic Demand with Preservation Technology Investment under Inflationary Environment”, Journal of Advanced Manufacturing Systems J, World Scientific, ISSN NO. 1793-6896, Department - Maths

12. Jahanshahi, S. M. A.; Yousof, Haitham M.; Sharma, Vikas Kumar “The Burr X Frechet Model for Extreme Values: Mathematical Properties, Classical Inference and Bayesian Analysis”, PAKISTAN JOURNAL OF STATISTICS AND OPERATION RESEARCH J, 2019, ISSN NO. 15, Department - MATH

13. Priyesh J. Chauhan, Bonthapalle Dastagiri Reddy; Saurabh Bhandari & Sanjib Kumar Panda “Battery Energy Storage for Seamless Transitions of Wind Generator in Standalone Microgrid”, IEEE Transactions on Industry Applications J, IEEE, ISSN NO. 1939-9367, Department - EE

14. P. J. Chauhan & J. K. Chatterjee “A Novel Speed Adaptive Stator Current Compensator for Voltage and Frequency Control of Standalone SEIG Feeding Three-Phase Four-Wire System”, IEEE TRANSACTIONS ON SUSTAINABLE ENERGY J, IEEE, ISSN NO. 1949-3037, Department - EE

15. Abhishek Rawat, Jatin Savaliya, Dwarkesh Chhabhaya “Field trial of IRNSS receiver”, Microwave and Optical Technology Letters J, Wiley, ISSN NO. 1098-2760, Department - EE

16. Harsh S.Dhiman, Dipankar Deb, Josep M.Guerrero “Hybrid machine intelligent SVR variants for wind forecasting and ramp events”, Renewable and Sustainable Energy Reviews J, Elsevier, ISSN NO. 1364-0321, Department - EE

17. Harsh S. Dhiman, Dipankar Deb, Vlad Muresan, and Valentina E. Balas “Wake Management in Wind Farms: An Adaptive Control Approach”, Energies  J, MDPI, ISSN NO. 1996-1073, Department - EE

18. Shubham Mishra, Kshitij Bhargava, Dipankar Deb “Numerical simulation of potential induced degradation (PID) in different thin-film solar cells using SCAPS-1D”, Solar Energy J, Elsevier, ISSN NO. 0038-092X, Department - EE

19. Ravi Patel, Dipankar Deb “Nonlinear adaptive control of microbial fuel cell with two species in a single chamber”, Journal of Power Sources J, Elsevier, ISSN NO. 0378-7753, Department - EE

20. Ankit A. Bhuranea, Manish Sharmab, Ru San-Tanc, U. Rajendra Acharya “An efficient detection of congestive heart failure using frequency localized filter banks for the diagnosis with ECG signals”, Cognitive Systems Research J, Elsevier, ISSN NO. 1389-0417, Department - EE

21. A. P. Singh, D. Deb, H. Agarwal “On selection of improved fractional model and control of different systems with experimental validation”, Communications in Nonlinear Science and Numerical Simulation J, Elsevier, ISSN NO. 1007-5704, Department - EE

22. Keyurkumar Patel and Axaykumar Mehta “Discrete-time Sliding Mode Protocols for Leader-following consensus of Discrete Multi-Agent System with Switching Graph Topology”, European Journal of Control J, Elsevier, ISSN NO. 0947-3580, Department - EE

23. Himani Modi, Axaykumar Mehta “SCADA Implementation of Secondary Voltage Control and Active Power Monitoring of AC Microgrid using SIEMENS SIMATIC S7 300 PLC and Totally Integrated Automation (TIA) Portal”, International Journal of Advanced Scientific Research and Management J, --, ISSN NO. 2455-6378, Department - EE

24. Santosh Mohan Rajkumar, Sayan Chakraborty, Rajeeb Dey*, and Dipankar Deb “Online Delay Estimation and Adaptive Compensation in Wireless Networked System: An Embedded Control Design”, International Journal of Control, Automation and Systems J, Springer, ISSN NO. eISSN:2005-4092, Department - EE

25. Urvish Prajapati, Abhishek Rawat & Dipankar Deb “Integrated Peripheral Security System for Diferent Areas Based on Exchange of Specifc Data Rates”, Wireless Personal Communications J, Springer, ISSN NO. 1572-834X, Department - EE

26. Manjunath Kallamadi, Dwarkesh Chhabhaya, Krupa Shah “Angle measurement–based compensation methodology to mitigate voltage unbalance in a distribution system”, International Transations on Electrical Energy System J, 2050-7038, ISSN NO. Wiley, Department - EE

27. Jaypal Singh Rajput,Manish Sharma, & U. Rajendra Acharya “Hypertension Diagnosis Index for Discrimination of High-Risk Hypertension ECG Signals Using Optimal Orthogonal Wavelet Filter Bank”, Int. J. Environ. Res. Public Health J, MDPI, ISSN NO. 1660-4601, Department - EE

28. Sharma, M., Rajendra Acharya, U. “A new method to identify coronary artery disease with ECG signals and time-Frequency concentrated antisymmetric biorthogonal wavelet filter bank”, Pattern Recognition Letters J, Science Direct, ISSN NO. 0167-8655, Department - EE

29. Dhiman, H.S., Deb, D., Muresan, V., Unguresan, M.-L. “Multi-criteria decision making approach for hybrid operation of wind farms”, Symmetry J, MDPI, ISSN NO. 2073-8994, Department - EE

30. Chaudhary, S., Bhargava, K., Yadav, N., Joshi, M.P., Singh, V. “Effect of concentration of DH6T on the performance of photoconductor fabricated using blends of P3HT and DH6T”, Optical Materials J, Elsevier, ISSN NO. 0925-3467, Department - EE

31. Jatin Upadhyay, Dipankar Deb & Abhishek Rawat “Design of Smart Door Closer System with Image Classification over WLAN”, Wireless Personal Communications J, Springer, ISSN NO. 1572-834X, Department - EE

32. Sharma, Manish; Singh, Swapnil; Kumar, Abhishek; Tan, Ru San; Acharya, U. Rajendra “Automated detection of shockable and non-shockable arrhythmia using novel wavelet-based ECG features”, COMPUTERS IN BIOLOGY AND MEDICINE J, 2019, ISSN NO. , Department - EE

33. Sharma, Manish; Shah, Sunny; Achuth, P., V “A NOVEL APPROACH FOR EPILEPSY DETECTION USING TIME-FREQUENCY LOCALIZED BI-ORTHOGONAL WAVELET FILTER”, JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY J, 2019, ISSN NO. , Department - EE

34. Bhurane, Ankit A.; Dhok, Shivani; Sharma, Manish; Yuvaraj, Rajamanickam; Murugappan, Murugappan; Acharya, U. Rajendra “Diagnosis of Parkinson s disease from electroencephalography signals using linear and self-similarity features”, EXPERT SYSTEMS J, 2019, ISSN NO. , Department - EE

35. Sumita Chaturvedi, Prem Kumar Bharti, Saurabh Kumar Yadav “A finite element simulation of MOM (metal‐on‐metal) hip implant”, Lubrication Science  J, Wiley, ISSN NO. 1557-6833, Department - ME

36. Navneet Khanna, N. M. Suri, Chetan Agrawal, Prassan Shah Grzegorz M. Krolczyk “Effect of Hybrid Machining Techniques on Machining Performance of In-House Developed Mg-PMMC”, Transactions of the Indian Institute of Metals J, Springer, ISSN NO. 0975-1645, Department - ME

37. Gajera, H M., Dave, K G. Darji, V P., Abhishek, K. “Optimization of process parameters of direct metal laser sintering process using fuzzy‑based desirability function approach”, Journal of the Brazilian Society of Mechanical Sciences and Engineering J, Springer, ISSN NO. 1806-3691, Department - ME

38. Anshuman Kumar, K. Vivekananda and Kumar Abhishek “Experimental Investigation and Optimization of Process Parameter for Inconel 718 Using Wire Electrical Discharge Machining (WEDM)”, Journal of Advanced Manufacturing Systems J, World Scientific, ISSN NO. 1793-6896, Department - ME

39. Navneet Khanna, S Mistry, R A Rahman Rashid and Munish Kumar Gupta “Investigations on density and surface roughness characteristics during selective laser sintering of Invar-36 alloy”, Materials Research Express J, IOP Science, ISSN NO. 2053-1591, Department - ME

40. Kumar Abhishek; V. Rakesh Kumar; Saurav Datta; Siba Sankar Mahapatra “An integrated multi-response optimisation route combining principal component analysis, fuzzy inference system, nonlinear regression and JAYA algorithm: a case experimental study on machining of GFRP (epoxy) composites”, International Journal of Industrial and Systems Engineering J, InderScience Pub., ISSN NO. 1748-5045, Department - ME

41. Rajiv Kumar Yadav, Suman Chatterjee, Kumar Abhishek & Siba Sankar Mahapatra “Assessment of machinability of inconel 718: A comparative study of CVD & PVD coated tools”, Indian Journal of Engineering & Materials Sciences J, NISCAIR-CSIR, India, ISSN NO. 0975-1017, Department - ME

42. Khanna, N., Airao, J., Gupta, M.K., Song, Q., Liu, Z., Mia, M., Maruda, R., Krolczyk, G. “Optimization of power consumption associated with surface roughness in ultrasonic assisted turning of Nimonic-90 using hybrid particle swarm-simplex method”, Materials J, MDPI, ISSN NO. 1996-1944, Department - ME

43. Kumar, D., Chaudhary, S., Kumar, V.V.K.S. “Galerkin finite element schemes with fractional Crank–Nicolson method for the coupled time-fractional nonlinear diffusion system”, Computational and Applied Mathematics J, Springer, ISSN NO. 1807-0302, Department - ME

44. Vora, J.J., Abhishek, K., Srinivasan, S. “Attaining optimized A-TIG welding parameters for carbon steels by advanced parameter-less optimization techniques: with experimental validation”, Journal of the Brazilian Society of Mechanical Sciences and Engineering J, Springer, ISSN NO. 1806-3691, Department - ME

45. Ramkumar, P.L. “Investigation on the Effect of Process Parameters on Impact Strength of Fused Deposition Modelling Specimens”, IOP Conference Series: Materials Science and Engineering C, IOP, ISSN NO. 1757-899X, Department - ME

46. Shrekumar Soni and Dr. Ajit Kumar Parwani “Experimental Study on Closed Loop Oscillating Heat Pipe for Different Filling Ratios”, IOP Conference Series: Materials Science and Engineering J, IOP, ISSN NO. 1757-899X, Department - ME

47. Chaudhary, Bhavesh; Patel, Vivek; Ramkumar, P. L.; Vora, Jay “Temperature Distribution During Friction Stir Welding of AA2014 Aluminum Alloy: Experimental and Statistical Analysis”, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS J, APR 2019, ISSN NO. , Department - ME

48. Khanna, Navneet; Sharma, Prachi; Bharati, Mahesh; Badheka, Vishvesh “Friction stir welding of dissimilar aluminium alloys AA 6061-T6 and AA 8011-h14: a novel study”, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING J, NOV 25 2019, ISSN NO. , Department - ME

49. Khanna, Navneet; Desai, Krupansh; Sheth, Arjun; Larsen, Johan Ollgaard “CFRP Machining on Indigenously Developing Cryogenic Machining Facility: An Initial Study”, MATERIALS TODAY-PROCEEDINGS J, 2019, ISSN NO. , Department - ME

50. Khanna, Navneet; Chaudhary, Bhavesh; Airao, Jay; Dak, Gaurav; Badheka, Vishvesh J. “Experimental Comparison of TIG and Friction Stir Welding Process for AA6063-T6 Aluminum Alloy”, INNOVATIONS IN INFRASTRUCTURE J, 2019, ISSN NO. , Department - ME

51. Purohit, Nilesh; Sharma, Vishaldeep; Fricke, Brian; Gupta, Dileep Kumar; Dasgupta, Mani Sankar “Parametric analysis and optimization of CO2 trans-critical cycle for chiller application in a warm climate”, APPLIED THERMAL ENGINEERING J, MAR 5 2019, ISSN NO. , Department - ME

52. Khanna, Navneet; Agrawal, Chetan; Shah, Prassan; Larsen, Johan Ollgaard; Phadnis, Vaibhav A. “Eco-friendly machining using retrofitted cryogenic machining system”, MATERIALS TODAY-PROCEEDINGS J, 2019, ISSN NO. , Department - ME

53. Yadav, Rajiv Kumar; Gandhi, Anadh; Abhishek, Kumar; Mahapatra, Siba Sankar; Nandi, Goutam “Effect of Feed and Nose radius on various machinability criteria in dry machining of Inconel 825”, MATERIALS TODAY-PROCEEDINGS J, 2019, ISSN NO. , Department - ME

54. Makadia, Umang; Kumar, Pulkit; Parwani, A. Jit Kumar; Deb, Dipankar “Simulations of Exhaust Gas Recirculation and Its Impact on NOx”, INNOVATIONS IN INFRASTRUCTURE BC, 2019, ISSN NO. , Department - ME-EE

55. Shah, Sanil; Parwani, Ajit Kumar “Estimation of Time-Varying Heat Source for One-Dimensional Heat Conduction by Conjugate Gradient Method”, INNOVATIONS IN INFRASTRUCTURE BC, 2019, ISSN NO. , Department - ME

56. Ramkumar, P. L.; Kulkarni, D. M.; Chaudhari, Vikas V. “Fracture toughness of LLDPE parts using rotational moulding technology”, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY J, 2019, ISSN NO. , Department - ME

57. Shah, N., Mavani, V., Kumar, V., Mungule, M., Iyer, K.K.R. “Impact Assessment of Plastic Strips on Compressive Strength of Concrete”, Journal of Materials in Civil Engineering J, ASCE, ISSN NO. 1943-5533, Department - CE

58. Kaul, D.S., Gajjar, H., Jai Devi, J., Kandya, A. “Development of a Low Cost Miniature Device for High Spatial, Distributed Monitoring of Aerosol Optical Depth for Regional Level Microclimatic Studies”, IOP Conference Series: Earth and Environmental Science C, IOP, ISSN NO. 1755-1315, Department - CE

59. Gupta, Trilok; Patel, K. A.; Siddique, Salman; Sharma, Ravi K.; Chaudhary, Sandeep “Prediction of mechanical properties of rubberised concrete exposed to elevated temperature using ANN”, MEASUREMENT J, DEC 2019, ISSN NO. , Department - CE

60. Avinash, Chaudhari; Jiten, Shah; Arkatkar, Shriniwas; Gaurang, Joshi; Manoranjan, Parida “Evaluation of pedestrian safety margin at mid-block crosswalks in India”, SAFETY SCIENCE J, NOV 2019, ISSN NO. , Department - CE

61. Varshney, L. K.; Patel, K. A.; Chaudhary, Sandeep; Nagpal, A. K. “An efficient and novel strategy for control of cracking, creep and shrinkage effects in steel-concrete composite beams”, STRUCTURAL ENGINEERING AND MECHANICS J, JUN 25 2019, ISSN NO. , Department - CE

62. Avinash, Chaudhari; Jiten, Shah; Arkatkar, Shriniwas; Gaurang, Joshi; Manoranjan, Parida “Investigating effect of surrounding factors on human behaviour at un-controlled mid-block crosswalks in indian cities”, SAFETY SCIENCE J, NOV 2019, ISSN NO. , Department - CE

63. Gajjar, Hardik; Devi, J. Jai “Assessment of Role of Water Body on Thermal Comfort in Ahmedabad, India”, 2019 3RD INTERNATIONAL CONFERENCE ON ENVIRONMENTAL AND ENERGY ENGINEERING (IC3E 2019) C, 2019, ISSN NO. , Department - CE

64. Iyer, Kannan K. R.; Shetty, Rakshith; Joseph, Jeevan; Singh, D. N. “Influence of microstructure on drying- and wetting-characteristics of fine-grained soils”, GEOMECHANICS AND GEOENGINEERING-AN INTERNATIONAL JOURNAL J, OCT 2 2019, ISSN NO. , Department - CE

65. I Watitula Longkumer, Nirmala Menon “Return of the Spirits: An Interview with Easterine Kire”, Journal of the English Association J, Oxford Academic, ISSN NO. 1756-1124, Department - English

66. Mahender Ca, Sumangala T Pa, Ramesh Adea, Saranya Aa, Shiva Prasadb, N. Venkataramania “Low-loss YIG thick films for microwave applications”, Ceramics International J, SD_Elsevier, ISSN NO. 0272-8842, Department - PH

67. Biswanath Bhoi, N. Venkataramani, Shiva Prasad, R.P.R.C. Aiyar, Gulshan Kumar,I. Samajdar, M. Kostylev “Observation of enhanced magnetic anisotropy in PLD YIG thin film on GGG (111) substrate”, Journal of Magnetism and Magnetic Materials J, Elsevier, ISSN NO. 0304-8853, Department - PH

68. Dheeraj K. Singh, Patrice Donfack, Bernd Rathke, Johannes Kiefer, Arnulf Materny “The Interplay of Different Moieties in the Binary System 1-Ethyl-3-Methylimidazolium Trifluoromethanesulfonate/Water Studied by Raman Spectroscopy and DFT Calculations”, J. Phys. Chem. B J, ACS Pub., ISSN NO. 1520-5207, Department - PH

69. Dhrubajyoti Majumdar, Swapan Dey, Dhiraj Das, Dheeraj K. Singh, Sourav Das, Kalipada Bankuraa, Dipankar Mishra, “Heterometallic Zn(II)-K(I) complex with salen-type Schiff-base ligand: Synthesis, crystal structure, solid-state photoluminescent property and theoretical study.”, Journal of Molecular Structure  J, Elsevier, ISSN NO. 0022-2860, Department - PH

70. Paridhi Sanchora, Deepak K. Pandey, Debkumar Rana, Arnulf Materny, Dheeraj K. Singh “Impact of Size and Electronegativity of Halide Anions on Hydrogen Bonds and Properties of 1-Ethyl-3-Methylimidazolium-Based Ionic Liquids.”, J. Phys. Chem. A J, ACS Pub., ISSN NO. 1520-5215, Department - PH

71. Puneet Khandelwal, Dheeraj K Singh, Pankaj Poddar “Advances in the Experimental and Theoretical Understandings of Antibiotic Conjugated Gold Nanoparticles for Antibacterial Applications.”, ChemistrySelect J, Wiley, ISSN NO. 2365-6549, Department - PH

72. Deepak K. Pandey, Paridhi Sanchora, Debkumar Rana, Patrice Donfack, Arnulf Materny and Dheeraj K. Singh “Impact of water on the hydrogen bonding between halidebased ion-pairs investigated by Raman scattering and density functional theory calculations”, Journal of Raman Spectroscopy J, Wiley, ISSN NO. 1097-4555, Department - PH

73. Prabhu Rajagiri, Tripta Parida, Baidyanath Sahu, Venkataramani Narayanan, Shiva Prasad & Krishnan Ramanathan “Enhancement of Magnetization in Substituted Zn Ferrite Thin Films”, Journal of Magnetism and Magnetic Materials , Elsevier, ISSN NO. 0304-8853, Department - PH

74. Mansi Dhuria “Anomalous EDGES 21-cm signal and a moduli dominated era”, PHYSICAL REVIEW D , APS, ISSN NO. 2470-0010, Department - PH

75. Bobby Acharya, Mansi Dhuria, Diptimoy Ghosh and Anshuman Maharana “Cosmology in the presence of multiple light moduli”, Journal of Cosmology and Astroparticle Physics , IOP Science, ISSN NO. 1475-7516, Department - PH

76. Mansi Dhuria and Gaurav Goswami “Trans-Planckian Censorship Conjecture and Non-Thermal Post Inflationary History”, PHYSICAL REVIEW D , APS, ISSN NO. 2470-0010, Department - PH

77. Justin Paul, Pravin Jadhav “Institutional determinants of foreign direct investment inflows: evidence from emerging markets”, International Journal of Emerging Markets , Emerald, ISSN NO. 1746-8809, Department - HSS

78. Choudhury, Rahul; Jadhav, Pravin “Asia s Changing International Investment Regime: Sustainability, Regionalization, and Arbitration”, FOREIGN TRADE REVIEW , AUG 2019, ISSN NO. , Department - HSS

79. Jadhav P., Pani U., Katti V. “Foreign Direct Investment in Infrastructure: Evidences from Indian Economy”, Energy, Environment and Globalization , Springer, ISSN NO. 978-981-13-9310-5, Department - HSS

80. Swami, J., Dixit, A., Tiwari, B. “Effect of Magnetic Ordering on Phonon Raman Spectra in Magnetic Systems”, Springer Proceedings in Physics , Springer, ISSN NO. 978-981-15-0202-6, Department - Phy

81. Mohit Kumar “An Area IF-Defuzzification Technique and Intuitionistic Fuzzy Reliability Assessment of Nuclear Basic Events of Fault Tree Analysis”, Harmony Search and Nature Inspired Optimization Algorithms Theory and Applications, ICHSA 2018 , Advances in Intelligent Systems and Computing (Springer), ISSN NO. 978-981-13-0761-4, Department - Maths

82. Chirag BagadaHimanshu DamorVishalkumar PrajapatiKumar Abhishek “Utility Function Approach Integrated with Fuzzy for Optimization in Milling Glass Fiber Reinforced Epoxy Composites”, Recent Advances in Mechanical Infrastructure (ICRAM-2019)  , Lecture Notes in Intelligent Transportation and Infrastructure (Springer), ISSN NO. 978-981-329-971-9, Department - ME

83. Chatterjee, Suman, Kumar Abhishek, and Siba Sankar Mahapatra “Optimization of Quality Characteristics in Laser Drilling of Ti6Al4V Using VIKOR”, Recent Advances in Mechanical Infrastructure (ICRAM-2019)  , Lecture Notes in Intelligent Transportation and Infrastructure (Springer), ISSN NO. 978-981-329-971-9, Department - ME

84. Prajapati, M.S., Rawat, A., Parikh, R., Joshi, P. “Analysis of Impact of Circular Cut on Microstrip Patch Antenna at 2.49 GHz for S Band Application”, Lecture Notes in Electrical Engineering , Springer, ISSN NO. 978-981-13-7091-5, Department - EE

85. Prajapati, M.S., Shesma, S.K., Rawat, A. “Performance Analysis of Triband Elliptical Patch Microstrip Antenna for GPS and Radar Application”, Lecture Notes in Electrical Engineering , Springer, ISSN NO. 978-981-13-7091-5, Department - EE

86. Bhargava, K., Singh, V. “Spectroscopic Characterization of Metal–Polymer Interface for Electronic Applications”, Springer Proceedings in Physics , Springer, ISSN NO. 978-981-15-0202-6, Department - EE

87. Bandyopadhyay, M., Jadav, D. “Acid/Base Functionalized Hybrid Porous Materials: Potential Catalysts for Industrially Important Chemical Transformation (Book Title: Advances in Spectroscopy: Molecules to Materials Proceedings of NCASMM 2018)”, Springer Proceedings in Physics , Springer, ISSN NO. 978-981-15-0202-6, Department - Chem

88. Jalaj Shah, Parth Joshi, Saurabh Verma & Dr. Jiten Shah “Investigating Engineering Properties of Modified Bitumen for Potential Solution of Pothole Problem for Indian Roads”, 1st International Conference on Science, Technology, Engineering, and Mathematics (STEM) organized under Vibrant Gujarat Global Investors Summit 2019 on 17th January 2019. , STEM 2019, ISSN NO. 9789388296618, Department - CE

89. Ghasia, M.A., Shah, Y.U., Rotte, V. “A Critical Review on Evaluation of Pavement Drainage Systems”, Lecture Notes in Civil Engineering , Springer, ISSN NO. 978-981-13-6701-4, Department - CE

90. Jaykumar J. Vora, Kumar Abhishek, PL Ramkumar “Different Methodologies for the Parametric Optimization of Welding Processes (Book Title: Advances in Welding Technologies for Process Development)”, CRC Press , CRC Press, ISSN NO. 9781351234825, Department - ME

91. Dipankar Deb, Valentina E. Balas, Rajeeb Dey, Jiten Shah (Editors) “Innovative Research in Transportation Infrastructure (Proceedings of ICIIF 2018)”, Springer , Springer, ISSN NO. 978-981-13-4721-4, Department - EE

92. Dipankar Deb, Rajeeb Dey, Valentina E. Balas “Engineering Research Methodology: A Practical Insight for Researchers”, Intelligent Systems Reference Library (Springer) , Intelligent Systems Reference Library (Springer), ISSN NO. 978-981-13-2947-0, Department - EE

93. Axaykumar Mehta, Brijesh Naik “Sliding Mode Controllers for Power Electronic Converters”, Series: Lecture Notes in Electrical Engineering 534 (Springer) , Series: Lecture Notes in Electrical Engineering 534 (Springer), ISSN NO. 978-981-13-3152-7, Department - EE

94. Kshitij Bhargava and Vipul Singh “Solution Processable Flexible Organic TFTs: Materials, Issues and Multidisciplinary Applications, chapter: 2 (Book Title: Advances in Engineering Research)”, Advances in Engineering Research. Volume 27 (Nova Pub.) , Advances in Engineering Research. Volume 27 (Nova Pub.), ISSN NO. 978-1-53614-803-9, Department - EE

95. Patel, R., Deb, D., Dey, R., E. Balas, V. “Adaptive and Intelligent Control of Microbial Fuel Cells”, Intelligent Systems Reference Library (Springer -Vol.161) , Intelligent Systems Reference Library (Springer -Vol.161), ISSN NO. 978-3-030-18068-3, Department - EE

96. Keyurkumar Patel and Axaykumar Mehta “Discrete Higher-Order Sliding Mode Control for Consensus of Leader Following Heterogeneous Discrete Multi-Agent System", (Book Title: Advances in Control Systems and its Infrastructure - Proceedings of ICPCCI 2019)”, LNEE, Springer , LNEE, Springer, ISSN NO. 978-981-15-0225-5, Department - EE

97. Jatin Savalia, Keyurkumar Patel and Axaykumar Mehta “Distributed Event-triggered Sliding Mode Control for Voltage Synchronization of DC Microgrid using Leader-Follower Consensus Protocol", (Book Title: Advances in Control Systems and its Infrastructure - Proceedings of ICPCCI 2019)”, LNEE, Springer , LNEE, Springer, ISSN NO. 978-981-15-0225-5, Department - EE

98. Dipesh Shah, and Axaykumar Mehta “Discrete-Time Sliding Mode Control for Non-Linear System Adulterated by Network Irregularities, (Book title Mathematics in Engineering Sciences: Novel Theories, Technologies, and Applications)”, CRC Press, Taylor & Francis Group , CRC Press, Taylor & Francis Group, ISSN NO. 9781138577671, Department - EE

99. Dipesh Shah, Dhruv Patel and Axaykumar Mehta “Sliding Mode Control Approaches for Robust Control of Quadruple Tank System, (Book title: Mathematics in Engineering Sciences: Novel Theories, Technologies, and Applications)”, CRC Press, Taylor & Francis Group , CRC Press, Taylor & Francis Group, ISSN NO. 9781138577671, Department - EE

100. Mehta, Axaykumar, Rawat, Abhishek, Chauhan, Priyesh (Eds.) “Advances in Control Systems and its Infrastructure Proceedings of ICPCCI 2019”, Lecture Notes in Electrical Engineering (Springer) , Lecture Notes in Electrical Engineering (Springer), ISSN NO. 978-981-15-0226-2, Department - EE

101. Editors: Mehta, Axaykumar, Rawat, Abhishek, Chauhan, Priyesh “Advances in Electric Power and Energy Infrastructure Proceedings of ICPCCI 2019”, Lecture Notes in Electrical Engineering (Springer) , Lecture Notes in Electrical Engineering (Springer), ISSN NO. 978-981-15-0206-4, Department - EE

102. S. Dhiman, Harsh, Deb, Dipankar “Decision and Control in Hybrid Wind Farms”, Studies in Systems, Decision and Control (Springer) , Studies in Systems, Decision and Control (Springer), ISSN NO. 978-981-15-0274-3, Department - EE

103. Deepak K. Pandey, P. Sanchora and Dheeraj K. Singh “Chapter-27: Vibrational Spectroscopy of CO2 in 1-ethyl-3-methylimidazolium Ethyl Sulphate Ionic Liquid: A Quantum Chemical Approach (Book title: Advances in Spectroscopy: Molecules to Materials)”, Springer , Springer, ISSN NO. 978-981-15-0201-9, Department - PH

104. Vaishali Sharma, Hardik L. Kagdada, Dheeraj K Singh and Prafulla K. Jha “Chapter-35: Trapping Melamine with Pristine and Functionalized Graphene Quantum Dots: DFT and SERS Studies (Book title: Advances in Spectroscopy: Molecules to Materials)”, Springer , Springer, ISSN NO. 978-981-15-0201-9, Department - PH

105. Editors: Singh, Dheeraj Kumar, Das, Sourav, Materny, Arnulf “Advances in Spectroscopy: Molecules to Materials Proceedings of NCASMM 2018”, Springer , Springer, ISSN NO. 978-981-15-0202-6, Department - PH

1. Majumdar, Dhrubajyoti; Biswas, Jayanta Kumar; Mondal, Monojit; Babu, M.S. Surendra; Metre, Ramesh K.; Das, Sourav; Bankura, Kalipada; Mishra, Dipankar “Coordination of N,O-donor appended Schiff base ligand (H2L1 ) towards Zinc(II) in presence of pseudohalides: Syntheses, crystal structures, photoluminescence, antimicrobial activities and Hirshfeld surfaces”, Journal of Molecular Structure J, SD- Elsevier, ISSN NO. 0022-2860, Department - Chemistry

2. Atanu Dey, Sourav Das, María A Palacios, Enrique Colacio, Vadapalli Chandrasekhar “Single‐Molecule Magnet and Magnetothermal Properties of Two‐Dimensional Polymers Containing Heterometallic [Cu5Ln2] (Ln = GdIII and DyIII) Motifs”, European Journal of Inorganic Chemistry J, Wiley, ISSN NO. 1099-0682, Department - Chemistry

3. Bandyopadhyay, Mahuya; Tsunoji, Nao; Bandyopadhyay, Rajib; Sano, Tsuneji “Comparison of sulfonic acid loaded mesoporous silica in transesterification of triacetin”, Reaction Kinetics, Mechanisms and Catalysis J, Springer, ISSN NO. 1878-5204, Department - Chemistry

4. Dhrubajyoti Majumdar, Swapan Dey, S.S.Sreejith, Jayanta Kumar Biswas, Monojit Mondal, Pooja Shukla, SouravDas “Syntheses, crystal structures and photo physical aspects of azido-bridged tetranuclear cadmium (II) complexes: DFT/TD-DFT, thermal, antibacterial and anti-biofilm properties”, Journal of Molecular Structure J, Elsevier, ISSN NO. 0022-2860, Department - Chemistry

5. Majumdar, Dhrubajyoti; Biswas, Jayanta Kumar; Mondal, Monojit; Babu, Manabolu Surya Surendra; Das, Sourav; Metre, Ramesh K.; SreeKumar, Sreejith S.; Bankura, Kalipada; Mishra, Dipankar “Cd(II) Pseudohalide Complexes with N, N-Bis(3-ethoxysalicylidenimino) 1,3-Diaminopropane: Crystal Structures, Hirshfeld Surface, Antibacterial and Anti-Biofilm Properties”, CHEMISTRYSELECT J, 3, ISSN NO. 11, Department - CH

6. Majumdar, Dhrubajyoti J.; Dey, Swapan; Sreekumar, Sreejith S.; Das, Sourav; Das, Dhiraj; Metre, Ramesh K.; Bankura, Kalipada; Mishra, Dipankar “Nitrato, Pseudohalo-Linked Zn(II)/Cd(II) Schiff-Base Complexes with 1,3-Diimine Spacer Group: Syntheses, Crystal Structures, DFT, TD-DFT and Fluorescence Studies”, CHEMISTRYSELECT J, 3, ISSN NO. 43, Department - CH

7. Sumangala, T. P.; Pasquet, Isabelle; Presmanes, Lionel; Thimont, Yohann; Bonningue, Corine; Venkataramani, N.; Prasad, Shiva; Baco-Carles, Valerie; Tailhades, Philippe; Barnabe, Antoine “Effect of synthesis method and morphology on the enhanced CO2 sensing properties of magnesium ferrite MgFe2O4”, CERAMICS INTERNATIONAL J, 44, ISSN NO. 15, Department - CH

8. Pathak, Sudipta; Chakraborty, Koushik; Ghosh, Surajit; Das, Sourav; Chatterjee, Sudipta; Samanta, Khokan; Konar, Saugata “Noncovalent interactions and electrical conductance study of copper(II) coordination complex derived from 2,6-pyridinedicarboxylic acid and aminopyrimidine ligands”, JOURNAL OF THE INDIAN CHEMICAL SOCIETY J, 95, ISSN NO. 2, Department - CH

9. M. Elgarhy, Vikas Kumar Sharma & I. Elbatal “Topp–Leone normal distribution with application to increasing failure rate data”, Journal of Statistics and Management Systems  J, Taylor & Francis, ISSN NO. 2169-0014, Department - Maths

10. Mohit Kumar “Intuitionistic Fuzzy Measures of Correlation Coefficient of Intuitionistic Fuzzy Numbers Under Weakest Triangular Norm”, International Journal of Fuzzy System Applications J, IGI Global, ISSN NO. 2156-177X, Department - Maths

11. Mohit Kumar “A Novel Weakest t-norm based Fuzzy Fault Tree Analysis Through Qualitative Data Processing and Its Application in System Reliability Evaluation”, Journal of Intelligent Systems J, DE GRUYTER, ISSN NO. 2191-026X, Department - Maths

12. Prajapati, U., Rawat, A. & Deb, D. “A Novel Approach Towards a Low Cost Peripheral Security System Based on Specific Data Rates”, Wireless Pers Commun J, Springer, ISSN NO. 1572-834X, Department - EE

13. Bathula Siva Kumar Reddy “Experimental Validation of Timing, Frequency And Phase Correction Of Received Signals Using Software Defined Radio Testbed”, Wireless Pers Commun J, Springer, ISSN NO. 1572-834X, Department - EE

14. M. Sharma, D. Goyal, P. Achuth, U. R. Acharya “An accurate sleep stage classification system using a new class of optimally time-frequency localized three-band wavelet filter bank”, Computers in Biology and Medicine J, Elsevier, ISSN NO. 0010-4825, Department - EE

15. D. Bhati, R.B. Pachori, M. Sharma, V. Gadre “Design of Time-Frequency Localized Two-Band Orthogonal Wavelet Filter Banks”, Circuits, Systems, and Signal Processing J, Springer, ISSN NO. 1531-5878, Department - EE

16. M. Sharma, P.Sharma, R.B. Pachori, U. R. Acharya “Dual tree complex wavelet transform based features for automated alcoholism identification”, International Journal of Fuzzy Systems J, Springer, ISSN NO. 2199-3211, Department - EE

17. Nath, Anirudh; Deb, Dipankar; Dey, Rajeeb; Das, Sipon “Blood glucose regulation in type 1 diabetic patients: an adaptive parametric compensation control-based approach ”, IET Systems Biology J, IET Journals, ISSN NO. 1751-8849, Department - EE

18. Ravi Patel, Dipankar Deb “Parametrized control-oriented mathematical model and adaptive backstepping control of a single chamber single population microbial fuelcell”, Journal of Power Sources J, Elsevier, ISSN NO. 0378-7753, Department - EE

19. C Shalu, Nidhi Yadav, Kshitij Bhargava, Mukesh P Joshi and Vipul Singh “All organic near ultraviolet photodetectors based on bulk hetero-junction of P3HT and DH6T”, Semiconductor Science and Technology J, IOP Publishing, ISSN NO. 0268-1242, Department - EE

20. Anil Gojiya, Dipankar Deb, Kannan K.R. Iyer “Feasibility study of power generation from agricultural residue in comparison with soil incorporation of residue”, Renewable Energy J, Elsevier, ISSN NO. 0960-1481, Department - EE

21. Manish Sharma, Shreyansh Agarwal, & Rajendra Acharya “Application of an optimal class of antisymmetric wavelet filter banks for obstructive sleep apnea diagnosis using ECG signals”, Computers in Biology and Medicine J, Elsevier, ISSN NO. 0010-4825, Department - EE

22. Sharma, Manish; Achuth, P. V.; Deb, Dipankar; Puthankattil, Subha D.; Acharya, U. Rajendra “An automated diagnosis of depression using three-channel bandwidth-duration localized wavelet filter bank with EEG signals”, COGNITIVE SYSTEMS RESEARCH J, DEC 2018, ISSN NO. , Department - EE

23. Sharma, Manish; Bhurane, Ankit A.; Acharya, U. Rajendra “MMSFL-OWFB: A novel class of orthogonal wavelet filters for epileptic seizure detection”, KNOWLEDGE-BASED SYSTEMS J, NOV 15 2018, ISSN NO. , Department - EE

24. Sharma, Manish; Tan, Ru San; Acharya, U. Rajendra “A novel automated diagnostic system for classification of myocardial infarction ECG signals using an optimal biorthogonal filter bank”, COMPUTERS IN BIOLOGY AND MEDICINE J, NOV 1 2018, ISSN NO. , Department - EE

25. Sharma, Manish; Acharya, U. Rajendra “Analysis of knee-joint vibroarthographic signals using bandwidth-duration localized three-channel filter bank”, COMPUTERS & ELECTRICAL ENGINEERING J, NOV 2018, ISSN NO. , Department - EE

26. Modi, Himani; Shah, Dipesh; Mehta, Hema; Mehta, Axaykumar “Microgrid Control using Distributed SMC with Compensation of Network Irregularities”, 2018 2ND INTERNATIONAL CONFERENCE ON POWER, ENERGY AND ENVIRONMENT: TOWARDS SMART TECHNOLOGY (ICEPE) C, 2018, ISSN NO. , Department - EE

27. Sharma, Sandeep; Srivastava, Dhananjay; Patel, Keyur; Mehta, Axaykumar “Design and Implementation of Second Order Sliding Mode Controller for 2-DOF Flexible Robotic Link”, 2018 2ND INTERNATIONAL CONFERENCE ON POWER, ENERGY AND ENVIRONMENT: TOWARDS SMART TECHNOLOGY (ICEPE) C, 2018, ISSN NO. , Department - EE

28. Srivastava, Dhananjay; Sharma, Sandeep; Patel, Keyur; Mehta, Axay “Second Order SMC Controller Design for Rotary Inverted Pendulum: An Underactuated System”, 2018 2ND INTERNATIONAL CONFERENCE ON POWER, ENERGY AND ENVIRONMENT: TOWARDS SMART TECHNOLOGY (ICEPE) C, 2018, ISSN NO. , Department - EE

29. Pansuria, Bhargav; Sharma, Sandeep; Rawat, Abhishek “DESIGN OF 1.176GHZ MICRO-STRIP PATCH ANTENNA FOR IRNSS APPLICATIONS”, 2018 9TH INTERNATIONAL CONFERENCE ON COMPUTING, COMMUNICATION AND NETWORKING TECHNOLOGIES (ICCCNT) C, 2018, ISSN NO. , Department - EE

30. Shah, Dipesh H.; Mehta, Axaykumar “Preliminaries of Sliding Mode Control and Networked Control System”, DISCRETE-TIME SLIDING MODE CONTROL FOR NETWORKED CONTROL SYSTEM BC, 2018, ISSN NO. , Department - EE

31. Shah, Dipesh H.; Mehta, Axaykumar “Discrete-Time Sliding Mode Controller for NCS with Deterministic Type Fractional Delay: A Switching Type Algorithm”, DISCRETE-TIME SLIDING MODE CONTROL FOR NETWORKED CONTROL SYSTEM BC, 2018, ISSN NO. , Department - EE

32. Shah, Dipesh H.; Mehta, Axaykumar “Discrete-Time Sliding Mode Controller for NCS with Deterministic Fractional Delay: A Non-switching Type Algorithm”, DISCRETE-TIME SLIDING MODE CONTROL FOR NETWORKED CONTROL SYSTEM BC, 2018, ISSN NO. , Department - EE

33. Shah, Dipesh H.; Mehta, Axaykumar “Multirate Output Feedback-Based Discrete-Time Sliding Mode Controller for NCS Having Deterministic Fractional Delay”, DISCRETE-TIME SLIDING MODE CONTROL FOR NETWORKED CONTROL SYSTEM BC, 2018, ISSN NO. , Department - EE

34. Shah, Dipesh H.; Mehta, Axaykumar “Discrete-Time Sliding Mode Controller for NCS Having Random Type Fractional Delay and Single Packet Loss”, DISCRETE-TIME SLIDING MODE CONTROL FOR NETWORKED CONTROL SYSTEM BC, 2018, ISSN NO. , Department - EE

35. Shah, Dipesh H.; Mehta, Axaykumar “Discrete-Time Sliding Mode Control with Disturbance Estimator for NCS Having Random Fractional Delay and Multiple Packet Loss”, DISCRETE-TIME SLIDING MODE CONTROL FOR NETWORKED CONTROL SYSTEM BC, 2018, ISSN NO. , Department - EE

36. Shah, Dipesh H.; Mehta, Axaykumar “Discrete-Time Sliding Mode Control for Networked Control System Conclusion, Future Scope and Challenges”, DISCRETE-TIME SLIDING MODE CONTROL FOR NETWORKED CONTROL SYSTEM BC, 2018, ISSN NO. , Department - EE

37. Prajapati, Nirav; Mehta, Darshit; Rajendra, Shah Krupa; Abhishek, Kumar “Driving-point Impedance and Particle Swarm Optimization based Circuit Synthesis of Power Transformer Winding”, 2018 3RD INTERNATIONAL CONFERENCE FOR CONVERGENCE IN TECHNOLOGY (I2CT) C, 2018, ISSN NO. , Department - EE

38. Surajkumar, Sharma M.; Singh, Amit K.; Deb, Dipankar “Harmonic Reduction in Various Systems Connected Through Distributed Energy Resources”, 2018 3RD INTERNATIONAL CONFERENCE FOR CONVERGENCE IN TECHNOLOGY (I2CT) C, 2018, ISSN NO. , Department - EE

39. Bijaya Bijeta Nayak, KumarAbhishek, SibaSankar Mahapatra, Diptikanta Das “Application of WPCA based taguchi method for multi-response optimization of abrasive jet machining process”, Materials Today: Proceedings J, Elsevier, ISSN NO. 2214-7853, Department - ME

40. Patel, P., Nakum, B., Abhishek, K., Rakesh Kumar, V “Machining performance optimization during plasma arc cutting of AISI D2 steel: application of FIS, nonlinear regression and JAYA optimization algorithm”, Journal of the Brazilian Society of Mechanical Sciences and Engineering J, Springer, ISSN NO. 1806-3691, Department - ME

41. Jay Airao, Bhavesh Chaudhary, Vivek Bajpai, Navneet Khanna “An Experimental Study of Surface Roughness Variation in End Milling of Super Duplex 2507 Stainless Steel”, Materials Today: Proceedings J, Elsevier, ISSN NO. 2214-7853, Department - ME

42. Nilesh Purohit, Dileep Kumar Gupta, Mani Sankar Dasgupta “Experimental investigation of a CO2 trans-critical cycle with IHX for chiller application and its energetic and exergetic evaluation in warm climate”, Applied Thermal Engineering J, Elsevier, ISSN NO. 1359-4311, Department - ME

43. Ankit Jain, Navneet Khanna, Vivek Bajpai “FE simulation of machining of Ti-54M titanium alloy for industry relevant outcomes”, Measurement J, Elsevier, ISSN NO. 0263-2241, Department - ME

44. Suman Chatterjee Siba Sankar Mahapatra, Arpan Mondal, Kumar Abhishek “An experimental study on drilling of titanium alloy using CO2 laser”, Sadhana (IAS, Bangolre & Springer) J, Springer, ISSN NO. 0973-7677, Department - ME

45. Din Bandhu, Ashish Thakur, Rajesh Purohit, Rajesh Kumar Verma and Kumar Abhishek “Characterization & evaluation of Al7075 MMCs reinforced with ceramic particulates and influence of age hardening on their tensile behavior”, Journal of Mechanical Science and Technology J, Springer, ISSN NO. 1976-3824, Department - ME

46. Anshuman Kumar, Kumar Abhishek, K.Vivekananda, KP. Maity, “Effect of wire electrode materials on die-corner accuracy for Wire Electrical Discharge Machining (WEDM) of Inconel 718”, Materials Today: Proceedings J, Elsevier, ISSN NO. 214-7853, Department - ME

47. Bijaya Bijeta Nayak, , Kumar Abhishek, , Siba Sankar Mahapatra, “Parametric Appraisal of WEDM Taper Cutting Process Using Maximum Deviation Method”, Materials Today: Proceedings J, Elsevier, ISSN NO. 214-7853, Department - ME

48. Chander Prakash, Sunpreet Singh, Munish Kumar Gupta, Mozammel Mia, Grzegorz Królczyk and Navneet Khanna “Synthesis, Characterization, Corrosion Resistance and In-Vitro Bioactivity Behavior of Biodegradable Mg–Zn–Mn–(Si–HA) Composite for Orthopaedic Applications”, Materials  J, MDPI, ISSN NO. 1996-1944, Department - ME

49. Parthkumar Patel, Bhavdeep Nakum, Kumar Abhishek, Anshuman Kumar “Optimization of Surface Roughness in Plasma arc Cutting of AISI D2 Steel using TLBO”, Materials Today: Proceedings J, Elsevier, ISSN NO. 214-7853, Department - ME

50. Bhavesh Chaudhary, PL. Ramkumar, Kumar Abhishek “Material Selection for Rotational Moulding Process Using Grey Relational Analysis Approach”, Materials Today: Proceedings J, Elsevier, ISSN NO. 214-7853, Department - ME

51. Rajagiri Prabhu, Baidyanath Sahu, Narayanan Venkataramani, Shiva Prasad and Ramanathan Krishnan “Large Room Temperature Magnetic Moment in Mn1−xZnxFe2O4 Thin Films for x ≥ 0.4”, IEEE TRANSACTIONS ON MAGNETICS J, IEEE, ISSN NO. 0018-9464, Department - ME

52. Saurabh Kumar Yadav & Nathi Ram “Transient response of two lobe aerodynamic journal bearing”, Journal of Tribology  J, Malaysian Tribology Society (MYTRIBOS), ISSN NO. 2289-7232, Department - ME

53. Saurabh Kumar Yadav, AK Rajput, N Ram, SC Sharma “Stability analysis of a rigid rotor supported by two-lobe hydrodynamic journal bearings operating with a non-Newtonian lubricant”, Journal of Engineering Tribology J, Sage, ISSN NO. 2041-305X, Department - ME

54. Patel, Parthkumar; Bhingole, P. P.; Makwana, Dhaval “Manufacturing, characterization and applications of lightweight metallic foams for structural applications: Review”, MATERIALS TODAY-PROCEEDINGS J, , ISSN NO. , Department - ME

55. Makwana, Dhaval; Bhingole, P. P. “Electrochemical and Plasma Surface Modification of Magnesium and its Alloy: Review”, MATERIALS TODAY-PROCEEDINGS J, , ISSN NO. , Department - ME

56. Singh, Rohit; Rashmi; Bhingole, Pamod; Avikal, Shwetank “Gray based Taguchi optimization for heat treated welded joint”, MATERIALS TODAY-PROCEEDINGS J, , ISSN NO. , Department - ME

57. Purohit, Nilesh; Gupta, Dileep Kumar; Dasgupta, Mani Sankar “EXERGETIC ANALYSIS OF CO2 TRANS-CRITICAL REFRIGERATION SYSTEM WITH AND WITHOUT INTERNAL HEAT EXCHANGER USING EXPERIMENTAL DATA”, 5TH IIR INTERNATIONAL CONFERENCE ON SUSTAINABILITY AND THE COLD CHAIN C, , ISSN NO. , Department - ME

58. Kannan K. R. Iyer, Jeevan Joseph, Rakshith Shetty and D. N. Singh “Following article has been published by Kannan Iyer (Faculty in Civil Engineering) Institute member.”, GEOMECHANICS AND GEOENGINEERING: AN INTERNATIONAL JOURNAL J, Taylor & Francis, ISSN NO.  1748-6033 , Department - CE

59. Manoj Langhi; Takashi Hosoda; and Subhasish Dey “Analytical Solution of k-ε Model for Nonuniform Flows”, Journal of Hydraulic Engineering J, ASCE, ISSN NO. 0733-9429, Department - CE

60. H. Sharma & Z. Ahmad “Enhancing transverse mixing in streams with submerged vanes”, Environmental Fluid Mechanics J, Springer, ISSN NO. 1573-1510, Department - CE

61. VASANI, MEERA “BREATHING THE UNIQUENESS OF KUNKANA CULTURE BY WORD-OF-THE MOUTH TRADITION”, International Journal of English and Literature (IJEL) J, TJPRC, ISSN NO. 2249-8028, Department - English

62. Sahu, B.N.; Prabhu, R.; Venkataramani, N.; Prasad, Shiva; Krishnan, R.; Nabiałek, A.; Chumak, O.M.; Zuberek, R “Magnetostriction studies in nano-crystalline zinc ferrite thin films by strain modulated ferromagnetic resonance”, Journal of Magnetism and Magnetic Materials J, Elsevier, ISSN NO. 0304-8853, Department - PH

63. Sultana, Rabia; Maheshwari, P K; Tiwari, Brajesh; Awana, V P S “High field (up to 140 kOe) angle dependent magneto transport of Bi2Te3 single crystals ”, Materials Research Express  J, IOP Publishing, ISSN NO. 2053-1591, Department - PH

64. Bahuguna, Bhagwati Prasad; Saini, L.K.; Sharma, Rajesh O.; Tiwari, Brajesh “Strain and electric field induced metallization in the GaX (X = N, P, As & Sb) monolayer ”, Physica E: Low-dimensional Systems and Nanostructures  J, Elsevier, ISSN NO. 1386-9477, Department - PH

65. Dwevedi, S.; Tiwari, B. “Magnetic and Transport Properties of Mn2Ni1.8In0.2 Alloy ”, Journal of Superconductivity and Novel Magnetism J, Springer, ISSN NO. 1557-1947, Department - PH

66. Saptarshi De, Narayanan Venkataramani, Shiva Prasad, Rajiv Onkar Dusane,Lionel Presmanes, Yohann Thimont, Philippe Tailhades, Valérie Baco-Carles, Corine Bonningue,Sumangala Thondiyanoor Pisharam, and Antoine Barnabé “Ethanol and Hydrogen Gas-Sensing Properties of CuO–CuFe2O4Nanostructured Thin Films”, IEEE SENSORS JOURNAL J, IEEE, ISSN NO. 1558-1748, Department - PH

67. Biswanath Bhoi, Narayanan Venkataramani, Ramnath P. R. C. Aiyar, Shiva Prasad, and Mikhail Kostylev “Effect of Annealing on the Structural and FMR Properties of Epitaxial YIG Thin Films Grown by RF Magnetron Sputtering”, IEEE TRANSACTIONS ON MAGNETICS J, IEEE, ISSN NO. 0018-9464, Department - PH

68. Bhagwati Prasad Bahuguna, L. K. Saini, Rajesh O. Sharma, Brajesh Tiwari “Hybrid functional calculations of electronic and thermoelectric properties of GaS, GaSe, and GaTe monolayers”, Physical Chemistry Chemical Physics (RSC) J, RSC, ISSN NO. 1463-9084, Department - PH

69. Durga Sankar Vavilapalli, Kavita Srikanti, Ramanjaneyulu Mannam, Brajesh Tiwari “Photoactive Brownmillerite Multiferroic KBiFe2O5 and Its Potential Application in Sunlight-Driven Photocatalysis”, OMEGA (ACS) J, ACS Publication, ISSN NO. 2470-1343, Department - PH

70. Amritkar, R. E.; Ma, Wen-Jong; Hu, Chin-Kun “Dependence of extreme events on spatial location”, PHYSICAL REVIEW E J, JUN 4 2018, ISSN NO. , Department - PH

71. Jadhav P., Choudhury R.N. “Determinants of Public–Private Partnership in Infrastructure: Empirical Evidences from India”, Innovative Research in Transportation Infrastructure J, Lecture Notes in Intelligent Transportation and Infrastructure (Springer), ISSN NO. 978-981-13-2032-3_7, Department - HSS

72. Mishra, P., Shaikh, A., Talati, I. “Optimal cycle time and payment option for retailer”, Advances in Intelligent Systems and Computing J, Springer, ISSN NO. 978-981-13-1966-2, Department - Maths

73. Navneet Khanna, Krupansh Desai, & Arjun Sheth “Industry supported experimental studies on drilling of thick multi-directional GFRP composite material”, Procedia CIRP J, Elsevier, ISSN NO. 2212-8271, Department - ME

74. Ashutosh Gupta, Ratnam Shah, Harsh Dave & Navneet Khanna “Multi-objective optimization of surface parameters such as concavity, straightness and roughness in milling process”, Materials Today: Proceedings  J, Elsevier, ISSN NO. 2214-7853, Department - ME

75. Navneet Khanna, Anadh Gandhi, Bhavdeep Nakum & Anil Srivastava “Optimization and analysis of surface roughness for INVAR-36 in end milling operations”, Materials Today: Proceedings  J, Elsevier, ISSN NO. 2214-7853, Department - ME

76. Parthkumar Patel, Shrekumar Soni, Nitin Kotkunde & Navneet Khanna “Study the effect of process parameters in plasma arc cutting on Quard-400 material using analysis of variance”,  J, Elsevier, ISSN NO. 2214-7853, Department - ME

77. Gandhi, Anadh, Kumar Abhishek, and Soni Kumari “Effect of Speed on Various Machinability Criteria in Dry Turning of Nickel–Iron–Chromium-Based Superalloy”, Innovations in Infrastructure (IICIF 2018) C, Springer, ISSN NO. 978-981-13-2032-3, Department - ME

78. Jayswal, Shubham, Harsh Jangade, Kumar Abhishek, and P. L. Ramkumar “Design and Simulation of Seat Handle Using Plastic Injection Molding Process”, Innovations in Infrastructure (IICIF 2018) C, Springer, ISSN NO. 978-981-13-2032-3, Department - ME

79. Ramkumar, P. L., and Kumar Abhishek “MADM Approach for Selection of Materials in Fused Deposition Modelling Process”, Innovations in Infrastructure (IICIF 2018) C, Springer, ISSN NO. 978-981-13-2032-3, Department - ME

80. Saurabh Kumar Yadav,Nathi Ram, I. V. Singh “Harmonic XFEM Simulation of 3-D Cracks”, Innovations in Infrastructure (IICIF 2018) C, Springer, ISSN NO. 978-981-13-2032-3, Department - ME

81. Kale, A., Ramkumar, P.L., Deb, D. “Vibration-assisted multipurpose cutter”, Innovations in Infrastructure (IICIF 2018) C, Advances in Intelligent Systems and Computing, ISSN NO. 978-981-13-2032-3, Department - ME

82. K. Shah, M. Shrimali, S. Doshi, M. Sharma “Detection of Power Transformer Winding Faults using Orthogonal Wavelet Filter Bank”, International conference on Signal Processing and Integrated Networks (SPIN) C, IEEE 2018, ISSN NO. 978-1-5386-3045-7, Department - EE

83. S. Doshi, K. Shah, M. Sharma “Tunable Q-Factor Wavelet Transform for Classifying Mechanical Deformations in Power Transformer”, International conference on Signal Processing and Integrated Networks (SPIN) C, IEEE 2018, ISSN NO. 978-1-5386-3045-7, Department - EE

84. J. Zala, M. Sharma,R. Bhalerao “Tunable Q-wavelet transform based features for automated screening of knee-joint vibroarthrographic signals”, International conference on Signal Processing and Integrated Networks (SPIN) C, IEEE 2018, ISSN NO. 978-1-5386-3045-7, Department - EE

85. Pranav Patel ; Dipankar Deb “Battery state of charge based algorithm for optimal wind farm power management”, 2017 6th International Conference on Computer Applications In Electrical Engineering-Recent Advances (CERA) C, IEEE 2017, ISSN NO. 978-1-5090-4874-8, Department - EE

86. Ashish Shandilya ; Dipankar Deb “Cost minimization in multi wind farm power dispatch”, 2017 6th International Conference on Computer Applications In Electrical Engineering-Recent Advances (CERA) C, IEEE 2017, ISSN NO. 978-1-5090-4874-8, Department - EE

87. Ravi Patel ; Dipankar Deb “Control-oriented parametrized models for microbial fuel cells”, 2017 6th International Conference on Computer Applications In Electrical Engineering-Recent Advances (CERA) C, IEEE 2017, ISSN NO. 978-1-5090-4874-8, Department - EE

88. Anil Gojiya ; Dipankar Deb “On feasibility of biomass power plant with agricultural waste processing”, 2017 6th International Conference on Computer Applications In Electrical Engineering-Recent Advances (CERA) C, IEEE 2017, ISSN NO. 978-1-5090-4874-8, Department - EE

89. Ravi Parikh, Priyank Joshi, & Abhishek Rawat “Designing of Rectangular Microstrip Patch Antenna at 2.48Ghz Frequency for IRNSS Application ”, 2018 2nd International Conference on Electronics, Materials Engineering & Nano-Technology (IEMENTech) C, IEEE , ISSN NO. 978-1-5386-5550-4, Department - EE

90. Smitkumar Patel ; Avinash Derwal ; Sachin Doshi ; Shah Krupa Rajendra “Utilising Genetic Algorithm and Driving Point Impedance Data to Synthesize High Frequency Circuit Model of Power Transformer Winding”, International conference on Signal Processing and Integrated Networks (SPIN) C, IEEE , ISSN NO. 978-1-5386-3045-7, Department - EE

91. Jaykumar Patel; Dharmendar Kumar; Kshitij Bhargava “Numerical Comparison of Defect-Induced Performance Degradation in CZTS and CZTSSe Solar Cells”, Innovations in Infrastructure, Proceedings of ICIIF 2018 C, Springer, ISSN NO. 978-981-13-1966-2, Department - EE

92. Harshit Modi ; Amit K Singh ; Kshitij Bhargava “Integration of Distributed Generator for Frequency Regulation and Loss Compensation Ancillary Services”, 2018 3rd International Conference for Convergence in Technology (I2CT) C, IEEE, ISSN NO. 978-1-5386-4273-3, Department - EE

93. Bhavin Airao ; Dhaval Gheravada ; Kshitij Bhargava “Exploring the Utility of Graphene as Window Layer Towards Efficiency Improvement in CIGS Solar Cells Using Numerical Simulations”, 2018 3rd International Conference for Convergence in Technology (I2CT) C, IEEE, ISSN NO. 978-1-5386-4273-3, Department - EE

94. Dharmendar Kumar ; Jaykumar Patel ; Kshitij Bhargava “Theoretical Investigation of the Influence of Defect States on the Power Conversion Efficiency of CZTSSe Solar Cells”, 2018 3rd International Conference for Convergence in Technology (I2CT) C, IEEE, ISSN NO. 978-1-5386-4273-3, Department - EE

95. Dhaval Gheravada ; Bhavin Airao ; Kshitij Bhargava “Analysis of Grading Induced Bandgap Variability and Defect States on Performance of CIGS Solar Cells Through Device Simulations”, 2018 3rd International Conference for Convergence in Technology (I2CT) C, IEEE, ISSN NO. 978-1-5386-4273-3, Department - EE

96. Akash Vidja; Harshad Nayakpara; Raghavendra Bhalera; Kshitij Bhargava “Methods for Calculating the Transformer Hot-Spot Temperature and Lifetime Prediction”, 2018 3rd International Conference for Convergence in Technology (I2CT) C, IEEE, ISSN NO. 978-1-5386-4273-3, Department - EE

97. Keyurkumar Patel and Axaykumar Mehta “Discrete-time Sliding Mode Control for Leader Following Discrete-time Multi-Agent System”, 44th Annual Conference of the IEEE Industrial Electronics Society (IECON- 2018) C, IEEE, ISSN NO. 978-1-5090-6684-1, Department - EE

98. K Manjunath, V Sarkar “Performance assessment of different droop control techniques in an AC microgrid”, 2017 7th International Conference on Power Systems (ICPS) C, IEEE, ISSN NO. 978-1-5386-1789-2, Department - EE

99. Patel, R., Gojiya, A., Deb, D. “Failure reconfiguration of pumps in two reservoirs connected to overhead tank”, Advances in Intelligent Systems and Computing J, Springer, ISSN NO. 978-981-13-1966-2, Department - EE

100. Malepati, B.S., Vijay, D., Deb, D., Manjunath, K. “Parameter validation to ascertain voltage of Li-ion battery through adaptive control”, Advances in Intelligent Systems and Computing J, Springer, ISSN NO. 978-981-13-1966-2, Department - EE

101. Sinha, S.K., Tiwari, B., Deb, D. “Thermo-magneto-electric generator—An approximate theoretical approach”, Advances in Intelligent Systems and Computing J, Springer, ISSN NO. 978-981-13-1966-2, Department - EE

102. Siva Kumar Reddy, B., Modi, D., Upadhyay, S. “Performance evaluation of various digital modulation techniques using GNU radio”, Advances in Intelligent Systems and Computing J, Springer, ISSN NO. 978-981-13-1966-2, Department - EE

103. Siva Kumar Reddy, B. “Experimental validation of spectrum sensing techniques using software-defined radio”, Lecture Notes in Electrical Engineering BC, Springer, ISSN NO. 978-981-13-0776-8, Department - EE

104. Dhiman, H.S., Anand, P., Deb, D. “Wavelet transform and variants of SVR with application in wind forecasting”, Advances in Intelligent Systems and Computing BC, Springer, ISSN NO. 978-981-13-1966-2, Department - EE

105. S. Shah, M. Sharma, D. Deb, R.B Pachori, “An automated alcoholism detection using orthogonal wavelet filter bank (Book Title: Machine Intelligence and Signal Analysis)”, Advances in Intelligent Systems and Computing BC, Springer, ISSN NO. 978-981-13-0923-6, Department - EE

106. D. Deb, T. Deb and M. Sharma “Redesign of a Railway Coach for Safe and Independent Travel of Elderly (Book Title: Machine Intelligence and Signal Analysis)”, Advances in Intelligent Systems and Computing BC, Springer, ISSN NO. 978-981-13-0923-6, Department - EE

107. Ramkumar Palaniappan “Life cycle analysis and wear and fatigue behavior of polymeric biomaterials; (Book Title: Fundamental Biomaterials: Polymers (A volume in Woodhead Publishing Series in Biomaterials)”, Elsevier J, Elsevier, ISSN NO. 978-0-08-102194-1, Department - ME

108. M. Sharma, P. Sharma, R.B Pachori, and V.M. Gadre “Doubledensity dual-tree complex wavelet transform based features for automated screening of knee-joint vibroarthrographic signals (Book Title: Advances in Intelligent Systems and Computing)”, Springer J, Springer, ISSN NO. 978-981-13-0923-6, Department - EE

109. Prajapati U., Reddy B.S.K. & Rawat A. “Modeling a Data Rate-Based Peripheral Security System in GNU Radio (Book Title: Integrated Intelligent Computing, Communication and Security. Studies in Computational Intelligence, Vol. 771)”, Springer J, Springer, ISSN NO. 978-981-10-8797-4, Department - EE

1. Bandyopadhyay, Mahuya; Yagenji, Yuya; Nishida, Hidechika; Sadakane, Masahiro; Sano, Tsuneji “Design of a highly active base catalyst through utilizing organic-solvent-treated layered silicate Hiroshima University Silicates”, Dalton Transactions J, The Royal Society of Chemistry, ISSN NO. 1477-9234, Department - Chemistry

2. Bandyopadhyay, Mahuya; Tsunoji, Nao; Sano, Tsuneji “Mesoporous MCM-48 Immobilized with Aminopropyltriethoxysilane: A Potential Catalyst for Transesterification of Triacetin”, Catalysis Letters J, Springer, ISSN NO. e-1572-879X, Department - Chemistry

3. Das, Sourav; Bag, Prasenjit; Biswas, Sourav “Heterometallic [Cu2Ln3] (Ln = DyIII, GdIII and HoIII) and [Cu4Ln2] (Ln = DyIII and HoIII ) Compounds: Synthesis, Structure and Magnetism”, European Journal of Inorganic Chemistry J, Wiley, ISSN NO. 1099-0682, Department - Chemistry

4. Dey, Atanu; Das, Sourav; Kundu, Subrata; Mondal, Abhishake; Rouzieres, Mathieu; Mathoniere, Corine; Clerac, Rodolphe; Narayanan, Ramakirushnan Suriya; Chandrasekhar, Vadapalli “Heterometallic Heptanuclear [Cu5Ln2] (Ln = Tb, Dy, and Ho) Single-Molecule Magnets Organized in One-Dimensional Coordination Polymeric Network”, Inorganic Chemistry J, ACS Publication, ISSN NO. 1520-510X, Department - Chemistry

5. Dhrubajyoti Majumdar, MS Surendra Babu, Sourav Das, Jayanta Kumar Biswas, Monojit Mondal, Suman Hazra “Synthesis, X-ray crystal structure, photo luminescent property, antimicrobial activities and DFT computational study of Zn(II) coordination polymer derived from multisite N,O donor Schiff base ligand (H2L1)”, Journal of Molecular Structure J, Elsevier, ISSN NO. 0022-2860, Department - Chemistry

6. Dhrubajyoti Majumdar, MS Babu, Sourav Das, Chandrajeet Mohapatra, Jayanta Kumar Biswas, Monojit Mondal “Syntheses, X‐ray Crystal Structures, Photoluminescence Properties, Antimicrobial Activities and Hirshfeld Surface of Two New Cd(II) Azide/Thiocyanate Linked Coordination Polymers”, ChemistrySelect J, Wiley, ISSN NO. 2365-6549, Department - Chemistry

7. Dhrubajyoti Majumdar, Sourav Das, Jayanta Kumar Biswas, Monojit Mondal “Synthesis, structure, fluorescent property, and antibacterial activity of new Cd(II) metal complex based on multidentate Schiff base ligand N,N′-Bis(3-methoxysalicylidenimino)-1,3-diaminopropane”, Journal of Molecular Structure J, Elsevier, ISSN NO. 0022-2860, Department - Chemistry

8. Sharma, Vikas Kumar “Bayesian analysis of head and neck cancer data using generalized inverse lindley stress-strength reliability model”, Communications in Statistics - Simulation and Computation J, Taylor & Francis, ISSN NO. 1532-415X (Online), Department - Maths

9. Sharma, Vikas Kumar; Dey, Sanku; Singh, Sanjay Kumar; Manzoor, Uzma “On Length and Area biased Maxwell distributions”, Communications in Statistics - Simulation and Computation J, Taylor & Francis , ISSN NO. 1532-4141 (Online), Department - Maths

10. Sharma, Vikas Kumar; Dey, Sanku; Mesfioui, Mhamed “A New Extension of Weibull Distribution with Application to Lifetime Data”, Annals of Data Science J, Springer, ISSN NO. 2198-5804 , Department - Maths

11. Vikas Kumar Sharma, Sanjay Kumar Singh, Umesh Singh “Classical and Bayesian methods of estimation for power Lindley distribution with application to waiting time data”, Communications for Statistical Applications and Methods J, The Korean Statistical Society, ISSN NO. 2383-4757, Department - Maths

12. Vikas Kumar Sharma “Estimation and Prediction for Type-II Hybrid Censored Data Follow Flexible Weibull Distribution”, STATISTICA J, --, ISSN NO. 1973-2201, Department - Maths

13. Deb, Dipankar; Brahmbhatt, Nisarg L. “Review of yield increase of solar panels through soiling prevention, and a proposed water-free automated cleaning solution”, Renewable and Sustainable Energy Reviews J, ELSEVIER, ISSN NO. 1364-0321, Department - EE

14. SHARMA, MANISH; PACHORI, RAM BILAS0 “A NOVEL APPROACH TO DETECT EPILEPTIC SEIZURES USING A COMBINATION OF TUNABLE-Q WAVELET TRANSFORM AND FRACTAL DIMENSION”,  J, World Scientific Publishing Company, ISSN NO. 1793-6810, Department - EE

15. Sharma, Manish; Deb, Dipankar; Acharya, U. Rajendra “A novel three-band orthogonal wavelet filter bank method for an automated identification of alcoholic EEG signals”, Applied Intelligence J, Springer, ISSN NO. 0924-669X, Department - EE

16. Sharma, Manish; Achuth, P. V.; Pachori, Ram Bilas; Gadre, Vikram M. “A parametrization technique to design joint time–frequency optimized discrete-time biorthogonal wavelet bases”, Signal Processing J, Elsevier, ISSN NO. 0165-1684, Department - EE

17. Sharma, Manish; Pachori, Ram Bilas; Acharya, U. Rajendra “A new approach to characterize epileptic seizures using analytic time-frequency flexible wavelet transform and fractal dimension”, Pattern Recognition Letters J, Elsevier, ISSN NO. 0167-8655 , Department - EE

18. Singh, A.K.; Parida, S.K. “A review on distributed generation allocation and planning in deregulated electricity market”, Renewable and Sustainable Energy Reviews J, Elsevier, ISSN NO. 1364-0321, Department - EE

19. Naik, B B; Mehta, A J “Sliding mode controller with modified sliding function for DC-DC Buck Converter”, ISA Transactions (Elsevier) J, Elsevier, ISSN NO. 0019-0578, Department - EE

20. Shah, D H; Mehta, A J “Fractional delay compensated discrete-time SMC for networked control system”, Digital Communications and Networks J, Elsevier, ISSN NO. 2352-8648, Department - EE

21. Shah, Dipesh; Mehta, Axay “Discrete-time Sliding Mode Controller Subject to Real-time Fractional Delays and Packet Losses for Networked Control System”, International Journal of Control, Automation and Systems J, Springer, ISSN NO. 2005-4092, Department - EE

22. Upadhyay, Abhay; Sharma, Manish; Pachori, Ram Bilas “Determination of instantaneous fundamental frequency of speech signals using variational mode decomposition”, Computers & Electrical Engineering J, Elsevier, ISSN NO. 0045-7906, Department - EE

23. Nilesh Purohit, Dileep Kumar Gupta, Mani Sankar Dasgupta “Energetic and economic analysis of trans-critical CO2 booster system for refrigeration in warm climatic condition”, International Journal of Refrigeration J, Elsevier, ISSN NO. 0140-7007, Department - ME

24. Dileep Kumar Gupta, Mani Sankar Dasgupta “Performance of CO2 Trans-Critical Refrigeration System with Work Recovery Turbine in Indian Context”, Energy Procedia  J, Elsevier, ISSN NO. 1876-6102, Department - ME

25. Iyer, Kannan K. R.; Singh, D. N. “Water retention characteristics of swelling clays in different compaction states”, Geomechanics and Geoengineering An International Journal J, Taylor & Francis., ISSN NO. 1748-6033, Department - CE

26. Shah, Jiten; Joshi, Gaurang; Arkatkar, Shriniwas; Parida, Purnima “Estimation of free speed of pedestrian flow on stairways at busy suburb rail transit station in India”, CURRENT SCIENCE J, IAS, ISSN NO. 0011 – 3891 , Department - CE

27. Sharma, Mamta R.; Singh, Arbind K.; Benipal, Gurmail S. “Elastic Stability of Concrete Beam-Columns Part I: Static Stability”, World Scientic Publishing Company J, WSP, ISSN NO. 1793-6764, Department - CE

28. Ramnavas, M. P.; Patel, K. A.; Chaudhary, Sandeep; Nagpal, A. K. “Explicit expressions for inelastic design quantities in composite frames considering effects of nearby columns and floors”, Structural Engineering and Mechanics J, Techno-Press, Ltd., ISSN NO. 1598-6217, Department - CE

29. Mamta R. Sharma, Arbind K. Singh, and Gurmail S. Benipal “Elastic Stability of Concrete Beam-Columns, Part II – Dynamic Stability”, International Journal of Structural Stability and Dynamics J, World Scientific, ISSN NO. 1793-6764, Department - CE

30. Xing, Yanlong; Speiser, Eugen; Singh, Dheeraj K.; Dittrich, Petra S.; Esser, Norbert “Bi-Axial Growth Mode of Au − TTF Nanowires Induced by Tilted Molecular Column Stacking”, The Journal of Physical Chemistry C J, ACS Publication, ISSN NO. 1932-7455, Department - PH

31. Bahuguna, Bhagwati Prasad; Sain, L. K.; Tiwari, Brajesh “Structural, electronic and optical properties of layered GaSe1-xAsx”, Computational Materials Science  J, Elsevier, ISSN NO. 0927-0256 , Department - PH

32. Khanna, Navneet; Ranjan, Priya; Bajpai, Vivek “Finite Element Modeling of Hard Turning through Micro Textured Tool”, International Conference on Advances in Materials and Manufacturing  C, , ISSN NO. , Department - ME

33. Kumar, Abhishek; Datta, Saurav; Masanta, Manoj “Fuzzy embedded imperialist competitive algorithm (ICA) for multi-response optimization during machining of CFRP (Epoxy) composites”, 2017 International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS) C, IEEE, ISSN NO. 978-1-5090-5674-3, Department - ME

34. Raghavendra H. Bhalerao “Tri-stereo image matching using watershed segmentation on disparity space image”, 35th Asian Conference on Remote Sensing, New Delhi, 23-27 Oct 2017 C, Springer, ISSN NO. -3980, Department - EE

35. Ravi Patel ; Dipankar Deb “Adaptive backstepping control of single chamber microbial fuel cell”, 2017 17th International Conference on Control, Automation and Systems (ICCAS) C, IEEE 2017, ISSN NO. 978-89-93215-14-4, Department - EE

36. Dipankar Deb ; Mrunal Patel ; Himmat Singh “Automated cleaning of wind turbine blades with no downtime”, 2017 IEEE International Conference on Industrial Technology (ICIT) C, IEEE 2017, ISSN NO. 978-1-5090-5320-9, Department - EE

37. Ravi Patel ; Dipankar Deb ; Himani Modi ; Sunny Shah “Adaptive backstepping control scheme with integral action for quanser 2-dof helicopter”, 2017 International Conference on Advances in Computing, Communications and Informatics (ICACCI) C, IEEE 2017, ISSN NO. 978-1-5090-6367-3, Department - EE

38. Nisarg Brahmbhatt ; Mrunal Patel ; Dipankar Deb “Micro-controller driven wind turbine blade cleaning peripheries”, 2017 International Conference on Advances in Computing, Communications and Informatics (ICACCI) C, IEEE 2017, ISSN NO. 978-1-5090-6367-3, Department - EE

39. Pranav Patel ; Ashish Shandilya ; Dipankar Deb “Optimized hybrid wind power generation with forecasting algorithms and battery life considerations”, 2017 IEEE Power and Energy Conference at Illinois (PECI) C, IEEE 2017, ISSN NO. 978-1-5090-5550-0, Department - EE

40. Dinesh Kumar Cholkar, Abhishek Rawat “Design Analysis of Octagonal-Shaped Microstrip Patch Antenna at 5.70 and 8.00 GHz”, Proceedings of the International Conference on Nano-electronics, Circuits & Communication Systems C, Springer, ISSN NO. 978-981-10-2999-8, Department - EE

41. Dave, Trudeep N.; Thaker, Tejaskumar P. “Reuse of Plastic Waste in Foundation Soil Reinforcement Application ”, Proceedings of the 19th International Conference on Soil Mechanics and Geotechnical Engineering C, Seoul 2017, ISSN NO. , Department - CE

42. Raghavendra H, Bhalerao “A review of State of the art Web GIS for Lunar Exploration”, Nova Science Publications J, Nova Science Publications, ISSN NO. 9781536127799, Department - EE

43. Anupam, Aditya Kumar; Kumar, Praveen; Ransinchung, G. D.; Shah, Yogesh U. “Study on Performance and Efficacy of Industrial Waste Materials in Road Construction: Fly Ash and Bagasse Ash”, AIRFIELD AND HIGHWAY PAVEMENTS 2017: PAVEMENT INNOVATION AND SUSTAINABILITY J, ASCE, ISSN NO. 9780784480946, Department -

44. Patel, Keyur; Mehta, Axaykumar “Second Order Sliding Mode Control Of Active Suspension System with Supertwisting Algorithm and Disturbance Observer”, IECON 2017 - 43RD ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY C, IEEE, ISSN NO. 978-1-5386-1127-2, Department -

45. Shah, D. H.; Mehta, A. J. “Multirate Output Feedback Based Discrete-Time Sliding Mode Control for Fractional Delay Compensation in NCSs”, 2017 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY (ICIT) C, IEEE, ISSN NO. 978-1-5090-5320-9, Department -

46. Shah, Ankit P.; Mehta, Axaykumar J. “Direct Power Control of Grid-Connected DFIG Using Variable Gain Super-Twisting Sliding Mode Controller for Wind Energy Optimization”, IECON 2017 - 43RD ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY C, IEEE, ISSN NO. 978-1-5386-1127-2, Department -

47. Shah, D. H.; Mehta, A. J. “Discrete-Time Sliding Mode Control Using Thirans Delay Approximation for Networked Control System”, IECON 2017 - 43RD ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY C, IEEE, ISSN NO. 978-1-5386-1127-2, Department -

48. Brahmbhatt, Nisarg; Mann, Pankaj; Rawat, Abhishek “Design and Implementation of Compatible VoIP”, 2017 6TH INTERNATIONAL CONFERENCE ON COMPUTER APPLICATIONS IN ELECTRICAL ENGINEERING - RECENT ADVANCES (CERA) C, IEEE, ISSN NO. 978-1-5090-4874-8, Department -

1. Bandyopadhyay, Mahuya; Gies, Hermann; Grünert, Wolfgang; Berg, Maurits van den; Birkner, Alexander “Metal Oxide Nano-Particles Supported on Mesoporous Matrices: A Comparative Study on Structural Behavior”, Advanced Porous Materials J, American Scientific Publishers, ISSN NO. 2327-3941, Department - Chemistry

2. Biswas, Sourav; Das, Sourav; Rogez, Guillaume; Chandrasekhar, Vadapalli “Hydrazone-Ligand-Based Homodinuclear Lanthanide Complexes: Synthesis, Structure, and Magnetism”, European Journal of Inorganic Chemistry J, Wiley, ISSN NO. 1099-0682, Department - Chemistry

3. Biswas, Sourav; Goura, Joydeb; Das, Sourav “Octanuclear Heterobimetallic {Ni4Ln4} Assemblies Possessing Ln4 Square Grid [2 × 2] Motifs: Synthesis, Structure, and Magnetism”, Inorganic Chemistry J, American Chemical Society, ISSN NO. 1520-510X, Department - Chemistry

4. Sourav Biswas, Sourav Das, Sakiat Hossain, Arun Kumar Bar, Jean‐Pascal Sutter, Vadapalli Chandrasekhar “Tetranuclear Lanthanide(III) Complexes Containing a Square‐Grid Core: Synthesis, Structure, and Magnetism”, European Journal of Inorganic Chemistry J, Wiley, ISSN NO. 1099-0682, Department - Chemistry

5. Sourav Das, Tulika Gupta, Saurabh Kumar Singh, Michael Pissas, Gopalan Rajaraman, Vadapalli Chandrasekhar “Observation of Slow Relaxation and Single‐Molecule Toroidal Behavior in a Family of Butterfly‐Shaped Ln4 Complexes”, Chemistry – A European Journal J, Wiley, ISSN NO. 1521-3765, Department - Chemistry

6. Sourav Biswas, Sourav Das, Joydev Acharya, Vierandra Kumar, Jan van Leusen, Paul Kögerler, Juan Manuel Herrera, Enrique Colacio & Vadapalli Chandrasekhar “Homometallic DyIII Complexes of Varying Nuclearity from 2 to 21: Synthesis, Structure, and Magnetism”, Chemistry – A European Journal J, Wiley, ISSN NO. 1521-3765, Department - Chemistry

7. Sharma, Vikas Kumar; Singh, Sanjay Kumar; Singh, Umesh; Ul-Farhat, Khair “Bayesian estimation on interval censored Lindley distribution using Lindley’s approximation”, International Journal of System Assurance Engineering and Management  J, Springer, ISSN NO. 0975-6809, Department - Maths

8. Sharma, Vikas Kumar; Singh, Sanjay Kumar; Singh, Umesh “Estimation and prediction for Type-I hybrid censored data from generalized Lindley distribution”, Journal of Statistics & Management Systems J, Taylor & Francis, ISSN NO. 2169-0014 (Online), Department - Maths

9. Sharma, Vikas Kumar; Bakouch, Hassan S.; Suthar, Khushboo “An extended Maxwell distribution: Properties and Applications”, Communications in Statistics - Simulation and Computation J, , ISSN NO. 1532-4141 (Online), Department - Maths

10. Singh, S. R.; Sharma, Swati; Kumar, Mohit “Inventory models with multiple production and remanufacturing batches under shortages”, Control & Cybernetics J, EBSCO, ISSN NO. 0324-8569, Department - Maths

11. Kumar, Trivesh; Saraswat, Kapil; Harish, A. R. “Offset-fed trapezoidal monopole antenna for broadband circular polarization”, International Journal RF Microwave Computer Aided Engineering J, Wiley, ISSN NO. 1099-047X, Department - EE

12. Singh, A. K.; Parida, S. K. “Impact analysis of RES-based DGs with economical considerations in restructured electricity market”, Energy Sources, Part B: Economics, Planning, and Policy, J, Taylor & Francis., ISSN NO. 1556-7257 (Online), Department - EE

13. Khanna, N.; Kale, Ajay “A Review on Cryogenic Machining of Super alloys Used in Aerospace Industry”, Procedia Manufacturing J, Elsevier, ISSN NO. 2351-9789, Department - ME

14. Khanna, Navneet; Rahman Rashid, R.A; Palanisamy, Suresh “Experimental evaluation of the effect of workpiece heat treatments and cutting parameters on the machinability of Ti-10V-2Fe-3Al β titanium alloy using Taguchi’s design of experiments”,  J, Inderscience Enterprises Ltd, ISSN NO. 1748-572X, Department - ME

15. Nilesh Purohit, Dileep Kumar Gupta, Mani Sankar Dasgupta “Effect of inter-stage pressure on the performance of a two stage refrigeration cycle using inter cooler”, Energy Procedia (5th International Conference on Advances in Energy Research, ICAER 2015, 15-17 Dec.) C, Elsevier, ISSN NO. 1876-6102, Department - ME

16. Sharma, Mamta R.; Singh, Arbind K.; Benipal, Gurmail S. “Static and dynamic stability analysis of elastic flanged no-tension masonry beam-columns”, The Indian Concrete Journal J, , ISSN NO. 0019-4565, Department - CE

17. Shah, Jiten H.; Joshi, Gaurang J.; Parida, Purnima M.; Arkatkar, Shriniwas S. “Determination of Pedestrian Level of Service for Undivided Stairways at Suburban Rail Stations in Developing Countries”, Transportation Research Record J, , ISSN NO. , Department - CE

18. Shah, Jiten; Joshi, Gaurang; Parida, Purnima; Arkatkar, Shriniwas “Comparative Study of Macroscopic Pedestrian Flow Characteristics on Stairways at Rail Transit Stations”,  J, Springer, ISSN NO. , Department - CE

19. Shah, Jiten; Joshi, Gaurang; Parida, Purnima; Arkatkar, Shriniwas “Effect of directional distribution on stairway capacity at a suburban railway station”, Transportation Letters, The International Journal of Transportation Research J, Taylor & Francis, ISSN NO. 1942-7875, Department - CE

20. Devi, J. Jai; Bergin, Michael H.; Mckenzie, Michael; Schauer, James J.; Weber, Rodney J. “Contribution of particulate brown carbon to light absorption in the rural and urban Southeast US”, Atmospheric Environment J, Elsevier, ISSN NO. 1352-2310, Department - CE

21. VASANI, MEERA “THE CONCEPT of ART FOR LIFE’S SAKE: THE ONLY PREACHING of BHABANI BHATTACHARYA in HIS NOVELS”, American International Journal of Research in Humanities, Arts and Social Sciences  J, IASIR, ISSN NO. 2328-3696, Department - English

22. Menon, Sumithra Sivadas; Sen, Sayantani; Pramanik, Pallabi; Bhattacharyya, Anirban; Gupta, Bhavana; Tiwari, Brajesh “Anomalous red emission with competition and coexistence of defect and band edge emission in photo-electrochemically active (Zn0.97Ga0.03)(O0.95N0.05) solid solution”, RSC Advances  J, The Royal Society of Chemistry, ISSN NO. 2046-2069, Department - PH

23. S Dwevedi, MK Dahilya, B Tiwari “Structural, Magnetic, and Transport Properties of NiTiIr Shape Memory Alloy”, Journal of Superconductivity and Novel Magnetism  J, Springer, ISSN NO. 1557-1947, Department - PH

24. Khanna, Navneet; Joshi, Vivek; Pramanik, Alokesh “SUSTAINABLE MACHINING OF SS 410 ALLOY”, IVTH INTERNATIONAL CONFERENCE ON PRODUCTION AND INDUSTRIAL ENGINEERING C, , ISSN NO. , Department - ME

25. Pramanik, Alokesh; Khanna, Navneet “EFFECT OF SPEED, FEED AND SIZE OF THE REINFORCEMENTS ON MACHINED SURFACE AND TOOL WEAR DURING MILLING OF METAL MATRIX COMPOSITES (MMCs)”, IVTH INTERNATIONAL CONFERENCE ON PRODUCTION AND INDUSTRIAL ENGINEERING C, , ISSN NO. , Department - ME

26. Ketan R. Gandhi ; Ketan P. Badgujar “Artificial neural network based identification of deviation in frequency response of power transformer windings”, Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD), 2014 Annual International Conference on C, IEEE 2014, ISSN NO. 978-1-4799-5202-1, Department - EE

27. Abhishek Rawat, Weibke Baille, and Tom Schanz “Transient boundary conditions in the frame of high level radioactive waste disposal at deep geological repository”, 2nd Petrus-OPERA Conference on Radioactive Waste Management and Geological Disposal C,  Delft University of Technology, ISSN NO. 978-94-6186-669-1 , Department - EE

28. Vidhi Rawat, Alok Jain, Vibhakar Shrimali, Abhishek Rawat “Automatic Detection of Fetal Abnormality Using Head and Abdominal Circumference”, International Conference on Computational Collective Intelligence (Computational Collective Intelligence) C, Springer, ISSN NO. 978-3-319-45246-3, Department - EE

29. Khanna, Navneet “Design of Experiments in Titanium Metal Cutting Research (Book Title: Design of Experiments in Production Engineering)”, Springer BC, Springer, ISSN NO. 978-3-319-23838-8, Department - ME

1. Vyas, Komal M.; Devkar, R.V.; Prajapati, Akhilesh; Jadeja, R.N. “Pyrazolone incorporating bipyridyl metallointercalators as effective DNA, protein and lung cancer targets: Synthesis, characterization and in vitro biocidal evaluation”, Chemico-Biological Interactions J, Elsevier, ISSN NO. 0009-2797, Department - Chemistry

2. Pany, Ambit K.; Bajpai, Saumya; Pani, Amiya K. “Optimal error estimates for semidiscrete Galerkin approximations to equations of motion described by Kelvin–Voigt viscoelastic fluid flow model”, Journal of Computational and Applied J, Elsevier Ltd., ISSN NO. 0377-0427 , Department - Maths

3. Singh, A.K.; Parida, S.K. “Novel sensitivity factors for DG placement based on loss reduction and voltage improvement”, Electrical Power and Energy Systems J, Elsevier Ltd, ISSN NO. 0142-0615, Department - EE

4. Singh, A.K.; Parida, S.K. “Allocation of distributed generation using proposed DMSP approach based on utility and customers aspects under deregulated environment”, Electrical Power and Energy Systems J, Elsevier Ltd., ISSN NO. 0142-0615 , Department - EE

5. Khanna, Navneet; Davim, J.P. “Design-of-experiments application in machining titanium alloys for aerospace structural components”, Measurement, J, Elsevier Ltd, ISSN NO. 0263-2241 , Department - ME

6. Nilesh Purohit, Dileep Kumar Gupta, Mani Sankar Dasgupta “Thermodynamic Analysis of Trans-Critical CO2 Refrigeration Cycle in Indian Context”, International Journal of Scientific and Technical Advancements J, -, ISSN NO. 2454-1532, Department - ME

7. VASANI, MEERA “A COMPARATIVE STUDY OF THE IMPACT OF NATIONAL EMERGENCY OF 1975 ESPECIALLY ON WOMEN PROTAGONISTS AS REPRESENTED IN THE NOVELS: RICH LIKE US BY NAYANTARA SAHGAL AND A FINE BALANCE BY ROHINTONMISTRY”, Journal of Higher Education and Research Society: A Refereed International  J, JHERS, ISSN NO. 2349-0209, Department - English

8. Patel, Pranav; Shandilya, Ashish; Brahmbhatt, Nisarg; Raval, Kshitij; Deb, Dipankar “Vedic and Conventional Methods of N x N Binary Multiplication with Hardware Implementation”, 2015 International Conference on Smart Sensors and Systems (IC-SSS) C, IEEE 2015, ISSN NO. 978-1-4673-9328-7/, Department - EE

9. Mehta, Axaykumar, Bandyopadhyay, Bijnan “Frequency-Shaped and Observer-Based Discrete-time Sliding Mode Control”, Springer: Briefs in Applied Sciences and Technology B, Springer: Briefs in Applied Sciences and Technology, ISSN NO. 978-81-322-2237-8, Department - EE

10. DH Shah, AJ Mehta “Output feedback discrete-time networked sliding mode control”, 2015 International Workshop on Recent Advances in Sliding Modes (RASM) C, IEEE, ISSN NO. , Department - EE

1. Kumar, Mohit “Applying weakest t-norm based approximate intuitionistic fuzzy arithmetic operations on different types of intuitionistic fuzzy numbers to evaluate reliability of PCBA fault”, Applied Soft Computing J, Elsevier Ltd., ISSN NO. 1568-4946, Department - Maths

2. Ajay Dashora; Bharat Lohani; Kalyanmoy Deb “Two-step procedure of optimisation for flight planning problem for airborne LiDAR data acquisition”, International Journal of Mathematical Modelling and Numerical Optimisation (IJMMNO) C, Inderscience Online Journals , ISSN NO. 2040-3615, Department - CE

3. Dighe, Amol; Ghosh, Diptimoy; Kodrani, Bhavik “Nonuniversality of indirect CP asymmetries in D → ππ, KK decays”, American Physical Society J, APS, ISSN NO. 1550-7998, Department - PH